ath79: add support for Senao Engenius EAP600

[openwrt/openwrt.git] / target / linux / ath79 / generic / base-files / etc / board.d / 02_network

diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 58ff2aa6eb039ad0188e9f13d569bfb1ca8a39df..355ea25b4d2ed3e324092ba286bfe122d2c69358 100755 (executable)
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -13,6 +13,7 @@ ath79_setup_interfaces()
        adtran,bsap1840|\
        allnet,all-wap02860ac|\
        alfa-network,ap121f|\
+       alfa-network,pi-wifi4|\
        arduino,yun|\
        aruba,ap-105|\
        avm,fritz1750e|\
@@ -27,9 +28,15 @@ ath79_setup_interfaces()
        dlink,dap-1330-a1|\
        dlink,dap-1365-a1|\
        dlink,dir-505|\
+       engenius,eap300-v2|\
+       engenius,eap600|\
+       engenius,ecb1200|\
        engenius,ecb1750|\
+       engenius,ecb350-v1|\
+       engenius,ecb600|\
        enterasys,ws-ap3705i|\
        glinet,gl-ar300m-lite|\
+       glinet,gl-usb150|\
        hak5,wifi-pineapple-nano|\
        meraki,mr16|\
        netgear,ex6400|\
@@ -47,6 +54,9 @@ ath79_setup_interfaces()
        tplink,cpe510-v3|\
        tplink,cpe610-v1|\
        tplink,cpe610-v2|\
+       tplink,eap225-outdoor-v1|\
+       tplink,eap225-v3|\
+       tplink,eap245-v1|\
        tplink,re350k-v1|\
        tplink,re355-v1|\
        tplink,re450-v1|\
@@ -76,6 +86,10 @@ ath79_setup_interfaces()
        winchannel,wb2000)
                ucidef_set_interface_lan "eth0"
                ;;
+       airtight,c-75)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "2:wan" "3:lan" "6@eth1"
+               ;;
        alfa-network,ap121fe)
                ucidef_set_interface_lan "eth0 usb0"
                ;;
@@ -95,6 +109,16 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
                ;;
+       belkin,f9j1108-v2|\
+       belkin,f9k1115-v2|\
+       tplink,archer-c5-v1|\
+       tplink,archer-c7-v1|\
+       tplink,archer-c7-v2|\
+       tplink,tl-wdr4900-v2|\
+       tplink,tl-wdr7500-v3)
+               ucidef_add_switch "switch0" \
+                       "0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
+               ;;
        buffalo,bhr-4grv|\
        buffalo,wzr-hp-g450h)
                ucidef_add_switch "switch0" \
@@ -127,6 +151,8 @@ ath79_setup_interfaces()
        comfast,cf-e120a-v3|\
        comfast,cf-e314n-v2|\
        compex,wpj531-16m|\
+       plasmacloud,pa300|\
+       plasmacloud,pa300e|\
        tplink,cpe210-v1|\
        tplink,cpe220-v2|\
        tplink,cpe220-v3|\
@@ -244,6 +270,11 @@ ath79_setup_interfaces()
                        "0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
                ;;
        nec,wg1200cr|\
+       qxwlan,e1700ac-v2-8m|\
+       qxwlan,e1700ac-v2-16m|\
+       qxwlan,e750g-v8-8m|\
+       qxwlan,e750g-v8-16m|\
+       ubnt,nanobeam-ac-gen2|\
        ubnt,nanostation-ac|\
        yuncore,a782|\
        yuncore,xd4200)
@@ -283,6 +314,11 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "2:lan" "3:lan"
                ;;
+       qxwlan,e558-v2-8m|\
+       qxwlan,e558-v2-16m)
+               ucidef_add_switch "switch0" \
+                       "0@eth1" "4:lan" "5:lan" "6@eth0" "3:wan"
+               ;;
        rosinson,wr818)
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan" "2:lan" "3:wan"
@@ -293,13 +329,6 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1"
                ;;
-       tplink,archer-c5-v1|\
-       tplink,archer-c7-v1|\
-       tplink,archer-c7-v2|\
-       tplink,tl-wdr4900-v2)
-               ucidef_add_switch "switch0" \
-                       "0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
-               ;;
        tplink,archer-d50-v1)
                ucidef_add_switch "switch0" \
                        "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "1:wan"
@@ -323,8 +352,8 @@ ath79_setup_interfaces()
                        "0@eth0" "1:lan:1" "2:lan:3" "3:lan:2"
                ;;
        tplink,tl-wpa8630-v1|\
-       tplink,tl-wpa8630p-v2-eu|\
        tplink,tl-wpa8630p-v2-int|\
+       tplink,tl-wpa8630p-v2.0-eu|\
        tplink,tl-wpa8630p-v2.1-eu)
                # port 5 (internal) is the power-line port
                ucidef_add_switch "switch0" \
@@ -349,7 +378,11 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
                ;;
-       ubnt,acb-isp)
+       ubnt,aircube-ac)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "2:lan:1" "3:lan:2" "5:lan:3" "4:wan"
+               ;;
+       ubnt,aircube-isp)
                ucidef_set_interface_wan "eth1"
                ucidef_add_switch "switch0" \
                        "0@eth0" "2:lan:1" "3:lan:3" "4:lan:2"
@@ -407,7 +440,10 @@ ath79_setup_macs()
        alfa-network,ap121f|\
        alfa-network,ap121fe|\
        alfa-network,n2q|\
+       alfa-network,n5q|\
+       alfa-network,pi-wifi4|\
        alfa-network,r36a|\
+       engenius,eap300-v2|\
        engenius,ens202ext-v1)
                label_mac=$(mtd_get_mac_binary art 0x1002)
                ;;
@@ -442,6 +478,10 @@ ath79_setup_macs()
                lan_mac=$(mtd_get_mac_text "mp" 0x1)
                label_mac=$lan_mac
                ;;
+       dlink,dap-2660-a1)
+               lan_mac=$(mtd_get_mac_ascii bdcfg "lanmac")
+               label_mac=$lan_mac
+               ;;
        dlink,dap-2695-a1)
                label_mac=$(mtd_get_mac_ascii bdcfg "wlanmac")
                ;;
@@ -475,9 +515,10 @@ ath79_setup_macs()
        elecom,wrc-300ghbk2-i)
                wan_mac=$(macaddr_add "$(mtd_get_mac_binary art 0x1002)" -2)
                ;;
+       engenius,ecb1200|\
        engenius,ecb1750)
                lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
-               label_mac=$(mtd_get_mac_ascii u-boot-env athaddr)
+               label_mac=$lan_mac
                ;;
        engenius,enh202-v1|\
        ubnt,airrouter|\
@@ -573,6 +614,7 @@ ath79_setup_macs()
                label_mac=$wan_mac
                ;;
        ubnt,litebeam-ac-gen2|\
+       ubnt,nanobeam-ac-gen2|\
        ubnt,powerbeam-5ac-500|\
        ubnt,powerbeam-5ac-gen2)
                label_mac=$(mtd_get_mac_binary art 0x5006)