ath79: support for TP-Link EAP225 v3

[openwrt/openwrt.git] / target / linux / ath79 / generic / base-files / etc / hotplug.d / firmware / 11-ath10k-caldata

diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 3be2d337b95912ec60baa27ad5b8bca28c3aae58..ff15414eadc07618fb1f72a5f7481143317aa3c7 100644 (file)
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -4,15 +4,28 @@
 
 . /lib/functions/caldata.sh
 . /lib/functions/k2t.sh
-. /lib/functions/mikrotik-caldata.sh
 
 board=$(board_name)
 
 case "$FIRMWARE" in
 "ath10k/cal-pci-0000:00:00.0.bin")
        case $board in
+       allnet,all-wap02860ac|\
+       glinet,gl-x750)
+               caldata_extract "art" 0x5000 0x844
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
+               ;;
+       avm,fritz1750e|\
+       avm,fritzdvbc)
+               caldata_extract "urlader" 0x198a 0x844
+               ;;
        comfast,cf-wr650ac-v1|\
        comfast,cf-wr650ac-v2|\
+       devolo,magic-2-wifi|\
+       qxwlan,e1700ac-v2-8m|\
+       qxwlan,e1700ac-v2-16m|\
+       qxwlan,e600gac-v2-8m|\
+       qxwlan,e600gac-v2-16m|\
        ubnt,unifiac-lite|\
        ubnt,unifiac-lr|\
        ubnt,unifiac-mesh|\
@@ -20,8 +33,11 @@ case "$FIRMWARE" in
        ubnt,lap-120|\
        ubnt,litebeam-ac-gen2|\
        ubnt,nanobeam-ac|\
+       ubnt,nanobeam-ac-gen2|\
        ubnt,nanostation-ac|\
        ubnt,nanostation-ac-loco|\
+       ubnt,powerbeam-5ac-500|\
+       ubnt,powerbeam-5ac-gen2|\
        ubnt,unifiac-pro|\
        yuncore,a770)
                caldata_extract "art" 0x5000 0x844
@@ -35,6 +51,10 @@ case "$FIRMWARE" in
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) -1)
                ;;
+       dlink,dap-2695-a1)
+               caldata_extract "art" 0x5000 0x844
+               ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
+               ;;
        dlink,dir-859-a1)
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
@@ -49,7 +69,8 @@ case "$FIRMWARE" in
        engenius,epg5000|\
        iodata,wn-ac1167dgr|\
        iodata,wn-ac1600dgr2|\
-       sitecom,wlr-7100)
+       sitecom,wlr-7100|\
+       zyxel,nbg6616)
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
                ;;
@@ -61,13 +82,6 @@ case "$FIRMWARE" in
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1)
                ;;
-       glinet,gl-x750)
-               caldata_extract "art" 0x5000 0x844
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
-               ;;
-       mikrotik,routerboard-wap-g-5hact2hnd)
-               mikrotik_caldata_extract "art" 0x5000 0x844
-               ;;
        nec,wg800hp)
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(mtd_get_mac_text board_data 0x880)
@@ -89,7 +103,8 @@ case "$FIRMWARE" in
        tplink,archer-c2-v3|\
        tplink,archer-c7-v4|\
        tplink,archer-c7-v5|\
-       tplink,archer-c25-v1)
+       tplink,archer-c25-v1|\
+       tplink,tl-wr902ac-v1)
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1)
                ;;
@@ -102,22 +117,37 @@ case "$FIRMWARE" in
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfile 0xf100) +2)
                ;;
+       tplink,archer-d7-v1|\
+       tplink,archer-d7b-v1)
+               caldata_extract "art" 0x5000 0x844
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfs 0xf100) +2)
+               ;;
+       tplink,eap245-v1|\
+       tplink,re450-v2|\
+       tplink,re450-v3)
+               caldata_extract "art" 0x5000 0x844
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
+               ;;
        tplink,re350k-v1)
                caldata_extract "art" 0x5000 0x844
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary config 0x10008) +2)
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +2)
                ;;
        tplink,re355-v1|\
        tplink,re450-v1)
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
                ;;
-       tplink,re450-v2)
+       tplink,tl-wpa8630-v1)
                caldata_extract "art" 0x5000 0x844
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x0fc00) +1)
                ;;
-       tplink,tl-wr902ac-v1)
+       esac
+       ;;
+"ath10k/cal-pci-0000:01:00.0.bin")
+       case $board in
+       sitecom,wlr-8100)
                caldata_extract "art" 0x5000 0x844
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary tplink 0x8) -1)
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
                ;;
        esac
        ;;
@@ -130,9 +160,24 @@ case "$FIRMWARE" in
                        /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
                rm /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
                ;;
+       comfast,cf-e560ac|\
+       comfast,cf-ew72|\
+       comfast,cf-wr752ac-v1)
+               caldata_extract "art" 0x5000 0x2f20
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
+               ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+                       /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+               rm /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
+               ;;
        dlink,dir-842-c1|\
        dlink,dir-842-c2|\
-       dlink,dir-842-c3|\
+       dlink,dir-842-c3)
+               caldata_extract "art" 0x5000 0x2f20
+               caldata_valid "202f" || caldata_extract "reserved" 0x15000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_ascii devdata wlan5mac)
+               ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+                       /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+               ;;
        nec,wg1200cr)
                caldata_extract "art" 0x5000 0x2f20
                ath10k_patch_mac $(mtd_get_mac_ascii devdata wlan5mac)
@@ -155,13 +200,29 @@ case "$FIRMWARE" in
        tplink,archer-c59-v2|\
        tplink,archer-c60-v1|\
        tplink,archer-c60-v2|\
+       tplink,archer-c60-v3|\
        tplink,archer-c6-v2|\
        tplink,archer-c6-v2-us)
                caldata_extract "art" 0x5000 0x2f20
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mac 0x8) -1)
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1)
                ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
                        /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
                ;;
+       tplink,eap225-outdoor-v1|\
+       tplink,eap225-v3|\
+       tplink,eap225-wall-v2|\
+       tplink,tl-wpa8630p-v2-int|\
+       tplink,tl-wpa8630p-v2.0-eu|\
+       tplink,tl-wpa8630p-v2.1-eu)
+               caldata_extract "art" 0x5000 0x2f20
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
+               ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+                       /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+               ;;
+       tplink,eap245-v3)
+               caldata_extract "art" 0x5000 0x2f20
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
+               ;;
        yuncore,a782|\
        yuncore,xd4200)
                caldata_extract "art" 0x5000 0x2f20