-DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE
+DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE UBNT_VERSION UBNT_REVISION
+
+# On M (XW) devices the U-Boot as of version 1.1.4-s1039 doesn't like
+# VERSION_DIST being on the place of major(?) version number, so we need to
+# use some number.
+UBNT_REVISION := $(VERSION_DIST)-$(REVISION)
# mkubntimage is using the kernel image direct
# routerboard creates partitions out of the ubnt header
define Build/mkubntimage
- -$(STAGING_DIR_HOST)/bin/mkfwimage \
- -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
- -k $(IMAGE_KERNEL) \
- -r $@ \
- -o $@
+ -$(STAGING_DIR_HOST)/bin/mkfwimage -B $(UBNT_BOARD) \
+ -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
+ -k $(IMAGE_KERNEL) -r $@ -o $@
endef
-# all UBNT XM device expect the kernel image to have 1024k while flash, when
+# all UBNT XM/WA devices expect the kernel image to have 1024k while flash, when
# booting the image, the size doesn't matter.
define Build/mkubntimage-split
-[ -f $@ ] && ( \
dd if=$@ of=$@.old1 bs=1024k count=1; \
dd if=$@ of=$@.old2 bs=1024k skip=1; \
- $(STAGING_DIR_HOST)/bin/mkfwimage \
- -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
- -k $@.old1 \
- -r $@.old2 \
- -o $@; \
+ $(STAGING_DIR_HOST)/bin/mkfwimage -B $(UBNT_BOARD) \
+ -v $(UBNT_TYPE).$(UBNT_CHIP).v$(UBNT_VERSION)-$(UBNT_REVISION) \
+ -k $@.old1 -r $@.old2 -o $@; \
rm $@.old1 $@.old2 )
endef
# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
# UBNT_TYPE e.g. one of (BZ, XM, XW)
# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x)
+# UBNT_VERSION e.g. one of (6.0.0, 8.5.3)
define Device/ubnt
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- IMAGE_SIZE := 7552k
+ DEVICE_VENDOR := Ubiquiti
+ DEVICE_PACKAGES := kmod-usb2
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | check-size | mkubntimage-split
+endef
+
+define Device/ubnt-bz
+ $(Device/ubnt)
+ SOC := ar7241
+ IMAGE_SIZE := 7448k
UBNT_BOARD := XM
- IMAGES := sysupgrade.bin factory.bin
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage-split
+ UBNT_CHIP := ar7240
+ UBNT_TYPE := BZ
+ UBNT_VERSION := 6.0.0
endef
-define Device/ubnt-xm
+define Device/ubnt-sw
$(Device/ubnt)
+ SOC := ar7242
DEVICE_PACKAGES += kmod-usb-ohci
- UBNT_TYPE := XM
+ IMAGE_SIZE := 7552k
+ UBNT_BOARD := SW
UBNT_CHIP := ar7240
- ATH_SOC := ar7241
+ UBNT_TYPE := SW
+ UBNT_VERSION := 1.4.1
KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | uImage lzma
endef
-define Device/ubnt-bz
+define Device/ubnt-wa
$(Device/ubnt)
- UBNT_TYPE := BZ
+ SOC := ar9342
+ IMAGE_SIZE := 15744k
+ UBNT_BOARD := WA
+ UBNT_CHIP := ar934x
+ UBNT_TYPE := WA
+ UBNT_VERSION := 8.5.3
+endef
+
+define Device/ubnt-xc
+ $(Device/ubnt)
+ IMAGE_SIZE := 15744k
+ UBNT_BOARD := XC
+ UBNT_CHIP := qca955x
+ UBNT_TYPE := XC
+ UBNT_VERSION := 8.5.3
+endef
+
+define Device/ubnt-xm
+ $(Device/ubnt)
+ DEVICE_VARIANT := XM
+ DEVICE_PACKAGES += kmod-usb-ohci
+ IMAGE_SIZE := 7448k
+ UBNT_BOARD := XM
UBNT_CHIP := ar7240
- ATH_SOC := ar7241
+ UBNT_TYPE := XM
+ UBNT_VERSION := 6.0.0
+ KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | uImage lzma
+endef
+
+define Device/ubnt-xw
+ $(Device/ubnt)
+ SOC := ar9342
+ DEVICE_VARIANT := XW
+ IMAGE_SIZE := 7552k
+ UBNT_BOARD := XM
+ UBNT_CHIP := ar934x
+ UBNT_REVISION := 42.$(UBNT_REVISION)
+ UBNT_TYPE := XW
+ UBNT_VERSION := 6.0.4
+endef
+
+define Device/ubnt_acb-isp
+ $(Device/ubnt)
+ SOC := qca9533
+ DEVICE_MODEL := airCube ISP
+ IMAGE_SIZE := 15744k
+ UBNT_BOARD := ACB-ISP
+ UBNT_CHIP := qca9533
+ UBNT_TYPE := ACB
+ UBNT_VERSION := 2.5.0
+endef
+TARGET_DEVICES += ubnt_acb-isp
+
+define Device/ubnt_airrouter
+ $(Device/ubnt-xm)
+ SOC := ar7241
+ DEVICE_MODEL := AirRouter
+ SUPPORTED_DEVICES += airrouter
+endef
+TARGET_DEVICES += ubnt_airrouter
+
+define Device/ubnt_bullet-m-ar7240
+ $(Device/ubnt-xm)
+ SOC := ar7240
+ DEVICE_MODEL := Bullet M
+ DEVICE_VARIANT := XM (AR7240)
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += bullet-m
+endef
+TARGET_DEVICES += ubnt_bullet-m-ar7240
+
+define Device/ubnt_bullet-m-ar7241
+ $(Device/ubnt-xm)
+ SOC := ar7241
+ DEVICE_MODEL := Bullet M
+ DEVICE_VARIANT := XM (AR7241)
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += bullet-m ubnt,bullet-m
+endef
+TARGET_DEVICES += ubnt_bullet-m-ar7241
+
+define Device/ubnt_bullet-m-xw
+ $(Device/ubnt-xw)
+ DEVICE_MODEL := Bullet M
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += bullet-m-xw
+endef
+TARGET_DEVICES += ubnt_bullet-m-xw
+
+define Device/ubnt_edgeswitch-5xp
+ $(Device/ubnt-sw)
+ DEVICE_MODEL := EdgeSwitch 5XP
+endef
+TARGET_DEVICES += ubnt_edgeswitch-5xp
+
+define Device/ubnt_edgeswitch-8xp
+ $(Device/ubnt-sw)
+ DEVICE_MODEL := EdgeSwitch 8XP
+ DEVICE_PACKAGES += kmod-switch-bcm53xx-mdio
endef
+TARGET_DEVICES += ubnt_edgeswitch-8xp
-define Device/ubnt_bullet-m
+define Device/ubnt_lap-120
+ $(Device/ubnt-wa)
+ DEVICE_MODEL := LiteAP ac (LAP-120)
+ DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
+endef
+TARGET_DEVICES += ubnt_lap-120
+
+define Device/ubnt_litebeam-ac-gen2
+ $(Device/ubnt-wa)
+ DEVICE_MODEL := LiteBeam AC
+ DEVICE_VARIANT := Gen2
+ DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
+endef
+TARGET_DEVICES += ubnt_litebeam-ac-gen2
+
+define Device/ubnt_nanobeam-ac
+ $(Device/ubnt-wa)
+ DEVICE_MODEL := NanoBeam AC
+ DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct rssileds
+endef
+TARGET_DEVICES += ubnt_nanobeam-ac
+
+define Device/ubnt_nanobridge-m
+ $(Device/ubnt-xm)
+ SOC := ar7241
+ DEVICE_MODEL := NanoBridge M
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += bullet-m
+endef
+TARGET_DEVICES += ubnt_nanobridge-m
+
+define Device/ubnt_nanostation-ac
+ $(Device/ubnt-wa)
+ DEVICE_MODEL := Nanostation AC
+ DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct rssileds
+endef
+TARGET_DEVICES += ubnt_nanostation-ac
+
+define Device/ubnt_nanostation-ac-loco
+ $(Device/ubnt-wa)
+ DEVICE_MODEL := Nanostation AC loco
+ DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
+endef
+TARGET_DEVICES += ubnt_nanostation-ac-loco
+
+define Device/ubnt_nanostation-loco-m
+ $(Device/ubnt-xm)
+ SOC := ar7241
+ DEVICE_MODEL := Nanostation Loco M
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += bullet-m
+endef
+TARGET_DEVICES += ubnt_nanostation-loco-m
+
+define Device/ubnt_nanostation-loco-m-xw
+ $(Device/ubnt-xw)
+ DEVICE_MODEL := Nanostation Loco M
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += loco-m-xw
+endef
+TARGET_DEVICES += ubnt_nanostation-loco-m-xw
+
+define Device/ubnt_nanostation-m
$(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti Bullet-M
+ SOC := ar7241
+ DEVICE_MODEL := Nanostation M
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += nanostation-m
endef
-TARGET_DEVICES += ubnt_bullet-m
+TARGET_DEVICES += ubnt_nanostation-m
+
+define Device/ubnt_nanostation-m-xw
+ $(Device/ubnt-xw)
+ DEVICE_MODEL := Nanostation M
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += nanostation-m-xw
+endef
+TARGET_DEVICES += ubnt_nanostation-m-xw
+
+define Device/ubnt_picostation-m
+ $(Device/ubnt-xm)
+ SOC := ar7241
+ DEVICE_MODEL := Picostation M
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += bullet-m
+endef
+TARGET_DEVICES += ubnt_picostation-m
+
+define Device/ubnt_powerbeam-5ac-500
+ $(Device/ubnt-xc)
+ SOC := qca9558
+ DEVICE_MODEL := PowerBeam 5AC
+ DEVICE_VARIANT := 500
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
+endef
+TARGET_DEVICES += ubnt_powerbeam-5ac-500
+
+define Device/ubnt_powerbeam-5ac-gen2
+ $(Device/ubnt-wa)
+ DEVICE_MODEL := PowerBeam 5AC
+ DEVICE_VARIANT := Gen2
+ DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct rssileds
+endef
+TARGET_DEVICES += ubnt_powerbeam-5ac-gen2
+
+define Device/ubnt_powerbridge-m
+ $(Device/ubnt-xm)
+ SOC := ar7241
+ DEVICE_MODEL := PowerBridge M
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += bullet-m
+endef
+TARGET_DEVICES += ubnt_powerbridge-m
define Device/ubnt_rocket-m
$(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti Rocket-M
+ SOC := ar7241
+ DEVICE_MODEL := Rocket M
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += rocket-m
endef
TARGET_DEVICES += ubnt_rocket-m
-define Device/ubnt_nano-m
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti Nano-M
+define Device/ubnt_routerstation_common
+ DEVICE_PACKAGES := -kmod-ath9k -wpad-mini -uboot-envtools kmod-usb-ohci \
+ kmod-usb2 fconfig
+ DEVICE_VENDOR := Ubiquiti
+ SOC := ar7161
+ IMAGE_SIZE := 16128k
+ IMAGES := factory.bin
+ IMAGE/factory.bin := append-rootfs | pad-rootfs | mkubntimage | \
+ check-size
+ KERNEL := kernel-bin | append-dtb | lzma | pad-to $$(BLOCKSIZE)
+ KERNEL_INITRAMFS := kernel-bin | append-dtb
+endef
+
+define Device/ubnt_routerstation
+ $(Device/ubnt_routerstation_common)
+ DEVICE_MODEL := RouterStation
+ UBNT_BOARD := RS
+ UBNT_TYPE := RSx
+ UBNT_CHIP := ar7100
+ DEVICE_PACKAGES += -swconfig
+ SUPPORTED_DEVICES += routerstation
endef
-TARGET_DEVICES += ubnt_nano-m
+TARGET_DEVICES += ubnt_routerstation
+
+define Device/ubnt_routerstation-pro
+ $(Device/ubnt_routerstation_common)
+ DEVICE_MODEL := RouterStation Pro
+ UBNT_BOARD := RSPRO
+ UBNT_TYPE := RSPRO
+ UBNT_CHIP := ar7100pro
+ SUPPORTED_DEVICES += routerstation-pro
+endef
+TARGET_DEVICES += ubnt_routerstation-pro
define Device/ubnt_unifi
$(Device/ubnt-bz)
- DEVICE_TITLE := Ubiquiti UniFi
+ DEVICE_MODEL := UniFi
+ SUPPORTED_DEVICES += unifi
endef
TARGET_DEVICES += ubnt_unifi
+
+define Device/ubnt_unifiac
+ DEVICE_VENDOR := Ubiquiti
+ SOC := qca9563
+ IMAGE_SIZE := 7744k
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
+endef
+
+define Device/ubnt_unifiac-lite
+ $(Device/ubnt_unifiac)
+ DEVICE_MODEL := UniFi AC Lite
+ SUPPORTED_DEVICES += unifiac-lite
+endef
+TARGET_DEVICES += ubnt_unifiac-lite
+
+define Device/ubnt_unifiac-lr
+ $(Device/ubnt_unifiac)
+ DEVICE_MODEL := UniFi AC LR
+ SUPPORTED_DEVICES += unifiac-lite ubnt,unifiac-lite
+endef
+TARGET_DEVICES += ubnt_unifiac-lr
+
+define Device/ubnt_unifiac-mesh
+ $(Device/ubnt_unifiac)
+ DEVICE_MODEL := UniFi AC Mesh
+ SUPPORTED_DEVICES += unifiac-lite
+endef
+TARGET_DEVICES += ubnt_unifiac-mesh
+
+define Device/ubnt_unifiac-mesh-pro
+ $(Device/ubnt_unifiac)
+ DEVICE_MODEL := UniFi AC Mesh Pro
+ SUPPORTED_DEVICES += unifiac-pro
+endef
+TARGET_DEVICES += ubnt_unifiac-mesh-pro
+
+define Device/ubnt_unifiac-pro
+ $(Device/ubnt_unifiac)
+ DEVICE_MODEL := UniFi AC Pro
+ DEVICE_PACKAGES += kmod-usb2
+ SUPPORTED_DEVICES += unifiac-pro
+endef
+TARGET_DEVICES += ubnt_unifiac-pro
projects / openwrt / openwrt.git / blobdiff