DEVICE_VARS += ADDPATTERN_ID ADDPATTERN_VERSION
DEVICE_VARS += SEAMA_SIGNATURE SEAMA_MTDBLOCK
DEVICE_VARS += KERNEL_INITRAMFS_PREFIX
-DEVICE_VARS += DAP_SIGNATURE
+DEVICE_VARS += DAP_SIGNATURE ENGENIUS_IMGNAME
define Build/add-elecom-factory-initramfs
$(eval edimax_model=$(word 1,$(1)))
-rm $@-empty.bin
endef
+# This needs to make /tmp/_sys/sysupgrade.tgz an empty file prior to
+# sysupgrade, as otherwise it will implant the old configuration from
+# OEM firmware when writing rootfs from factory.bin
+define Build/engenius-tar-gz
+ -[ -f "$@" ] && \
+ mkdir -p $@.tmp && \
+ echo '#!/bin/sh' > $@.tmp/before-upgrade.sh && \
+ echo ': > /tmp/_sys/sysupgrade.tgz' >> $@.tmp/before-upgrade.sh && \
+ $(CP) $(KDIR)/loader-$(DEVICE_NAME).uImage \
+ $@.tmp/openwrt-$(word 1,$(1))-uImage-lzma.bin && \
+ $(CP) $@ $@.tmp/openwrt-$(word 1,$(1))-root.squashfs && \
+ $(TAR) -cp --numeric-owner --owner=0 --group=0 --mode=a-s --sort=name \
+ $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
+ -C $@.tmp . | gzip -9n > $@ && \
+ rm -rf $@.tmp
+endef
+
define Build/mkdapimg2
$(STAGING_DIR_HOST)/bin/mkdapimg2 \
-i $@ -o $@.new \
$(STAGING_DIR_HOST)/bin/padjffs2 $(IMAGE_ROOTFS) -c 64 >>$@
endef
+
define Device/seama
KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma
KERNEL_INITRAMFS := $$(KERNEL) | seama
SOC := ar9331
DEVICE_VENDOR := 8devices
DEVICE_MODEL := Carambola2
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-chipidea2
+ DEVICE_PACKAGES := kmod-usb-chipidea2
IMAGE_SIZE := 16000k
SUPPORTED_DEVICES += carambola2
endef
SOC := ar9331
DEVICE_VENDOR := ALFA Network
DEVICE_MODEL := AP121F
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-chipidea2 kmod-usb-storage -swconfig
+ DEVICE_PACKAGES := kmod-usb-chipidea2 kmod-usb-storage -swconfig
IMAGE_SIZE := 16064k
SUPPORTED_DEVICES += ap121f
endef
TARGET_DEVICES += alfa-network_ap121f
+define Device/alfa-network_ap121fe
+ SOC := ar9331
+ DEVICE_VENDOR := ALFA Network
+ DEVICE_MODEL := AP121FE
+ DEVICE_PACKAGES := kmod-usb-chipidea2 kmod-usb-gadget-eth -swconfig
+ IMAGE_SIZE := 16064k
+endef
+TARGET_DEVICES += alfa-network_ap121fe
+
+define Device/alfa-network_n2q
+ SOC := qca9531
+ DEVICE_VENDOR := ALFA Network
+ DEVICE_MODEL := N2Q
+ DEVICE_PACKAGES := kmod-i2c-gpio kmod-gpio-pcf857x kmod-usb2 \
+ kmod-usb-ledtrig-usbport rssileds
+ IMAGE_SIZE := 15872k
+endef
+TARGET_DEVICES += alfa-network_n2q
+
+define Device/alfa-network_n5q
+ SOC := ar9344
+ DEVICE_VENDOR := ALFA Network
+ DEVICE_MODEL := N5Q
+ DEVICE_PACKAGES := rssileds
+ IMAGE_SIZE := 15872k
+ SUPPORTED_DEVICES += n5q
+endef
+TARGET_DEVICES += alfa-network_n5q
+
+define Device/alfa-network_r36a
+ SOC := qca9531
+ DEVICE_VENDOR := ALFA Network
+ DEVICE_MODEL := R36A
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
+ IMAGE_SIZE := 15872k
+ SUPPORTED_DEVICES += r36a
+endef
+TARGET_DEVICES += alfa-network_r36a
+
define Device/allnet_all-wap02860ac
SOC := qca9558
DEVICE_VENDOR := ALLNET
SOC := ar9331
DEVICE_VENDOR := Arduino
DEVICE_MODEL := Yun
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-chipidea2 kmod-usb-ledtrig-usbport \
+ DEVICE_PACKAGES := kmod-usb-chipidea2 kmod-usb-ledtrig-usbport \
kmod-usb-storage block-mount -swconfig
IMAGE_SIZE := 15936k
SUPPORTED_DEVICES += arduino-yun
TARGET_DEVICES += avm_fritzdvbc
define Device/buffalo_bhr-4grv
+ $(Device/buffalo_common)
SOC := ar7242
- DEVICE_VENDOR := Buffalo
DEVICE_MODEL := BHR-4GRV
+ BUFFALO_PRODUCT := BHR-4GRV
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
IMAGE_SIZE := 32256k
- IMAGES += factory.bin tftp.bin
- IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
- pad-rootfs | check-size
- IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc BHR-4GRV 1.99 | \
- buffalo-tag BHR-4GRV 3
- IMAGE/tftp.bin := $$(IMAGE/default) | buffalo-tftp-header
SUPPORTED_DEVICES += wzr-hp-g450h
endef
TARGET_DEVICES += buffalo_bhr-4grv
endef
TARGET_DEVICES += buffalo_bhr-4grv2
-define Device/buffalo_wzr-hp-ag300h
+define Device/buffalo_wzr_ar7161
+ $(Device/buffalo_common)
SOC := ar7161
- DEVICE_VENDOR := Buffalo
- DEVICE_MODEL := WZR-HP-AG300H
- IMAGE_SIZE := 32320k
- IMAGES += factory.bin tftp.bin
- IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
- pad-rootfs | check-size
- IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc WZR-HP-AG300H 1.99 | \
- buffalo-tag WZR-HP-AG300H 3
- IMAGE/tftp.bin := $$(IMAGE/default) | buffalo-tftp-header
+ BUFFALO_PRODUCT := WZR-HP-AG300H
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \
kmod-leds-reset kmod-owl-loader
+ IMAGE_SIZE := 32320k
SUPPORTED_DEVICES += wzr-hp-ag300h
endef
+
+define Device/buffalo_wzr-600dhp
+ $(Device/buffalo_wzr_ar7161)
+ DEVICE_MODEL := WZR-600DHP
+endef
+TARGET_DEVICES += buffalo_wzr-600dhp
+
+define Device/buffalo_wzr-hp-ag300h
+ $(Device/buffalo_wzr_ar7161)
+ DEVICE_MODEL := WZR-HP-AG300H
+endef
TARGET_DEVICES += buffalo_wzr-hp-ag300h
define Device/buffalo_wzr-hp-g302h-a1a0
+ $(Device/buffalo_common)
SOC := ar7242
- DEVICE_VENDOR := Buffalo
DEVICE_MODEL := WZR-HP-G302H
DEVICE_VARIANT := A1A0
+ BUFFALO_PRODUCT := WZR-HP-G302H
+ BUFFALO_HWVER := 4
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
IMAGE_SIZE := 32128k
- IMAGES += factory.bin tftp.bin
- IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
- pad-rootfs | check-size
- IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc WZR-HP-G302H 1.99 | \
- buffalo-tag WZR-HP-G302H 4
- IMAGE/tftp.bin := $$(IMAGE/default) | buffalo-tftp-header
SUPPORTED_DEVICES += wzr-hp-g300nh2
endef
TARGET_DEVICES += buffalo_wzr-hp-g302h-a1a0
define Device/buffalo_wzr-hp-g450h
+ $(Device/buffalo_common)
SOC := ar7242
- DEVICE_VENDOR := Buffalo
DEVICE_MODEL := WZR-HP-G450H/WZR-450HP
+ BUFFALO_PRODUCT := WZR-HP-G450H
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
IMAGE_SIZE := 32256k
- IMAGES += factory.bin tftp.bin
- IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
- pad-rootfs | check-size
- IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc WZR-HP-G450H 1.99 | \
- buffalo-tag WZR-HP-G450H 3
- IMAGE/tftp.bin := $$(IMAGE/default) | buffalo-tftp-header
SUPPORTED_DEVICES += wzr-hp-g450h
endef
TARGET_DEVICES += buffalo_wzr-hp-g450h
endef
TARGET_DEVICES += embeddedwireless_dorin
+define Device/engenius_loader_okli
+ DEVICE_VENDOR := EnGenius
+ KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49
+ LOADER_TYPE := bin
+ COMPILE := loader-$(1).bin loader-$(1).uImage
+ COMPILE/loader-$(1).bin := loader-okli-compile
+ COMPILE/loader-$(1).uImage := append-loader-okli $(1) | pad-to 64k | lzma | \
+ uImage lzma
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-squashfs-fakeroot-be | pad-to $$$$(BLOCKSIZE) | \
+ append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | \
+ check-size | engenius-tar-gz $$$$(ENGENIUS_IMGNAME)
+endef
+
define Device/engenius_ecb1750
SOC := qca9558
DEVICE_VENDOR := EnGenius
endef
TARGET_DEVICES += engenius_ecb1750
+define Device/engenius_enh202-v1
+ $(Device/engenius_loader_okli)
+ SOC := ar7240
+ DEVICE_MODEL := ENH202
+ DEVICE_VARIANT := v1
+ DEVICE_PACKAGES := rssileds
+ IMAGE_SIZE := 4864k
+ LOADER_FLASH_OFFS := 0x1b0000
+ ENGENIUS_IMGNAME := senao-enh202
+endef
+TARGET_DEVICES += engenius_enh202-v1
+
+define Device/engenius_ens202ext-v1
+ $(Device/engenius_loader_okli)
+ SOC := ar9341
+ DEVICE_MODEL := ENS202EXT
+ DEVICE_VARIANT := v1
+ DEVICE_PACKAGES := rssileds
+ IMAGE_SIZE := 12032k
+ LOADER_FLASH_OFFS := 0x230000
+ ENGENIUS_IMGNAME := senao-ens202ext
+endef
+TARGET_DEVICES += engenius_ens202ext-v1
+
define Device/engenius_epg5000
SOC := qca9558
DEVICE_VENDOR := EnGenius
endef
TARGET_DEVICES += glinet_gl-x750
+define Device/hak5_lan-turtle
+ $(Device/tplink-16mlzma)
+ SOC := ar9331
+ DEVICE_VENDOR := Hak5
+ DEVICE_MODEL := LAN Turtle
+ TPLINK_HWID := 0x5348334c
+ IMAGES := sysupgrade.bin
+ DEVICE_PACKAGES := kmod-usb-chipidea2 -iwinfo -kmod-ath9k -swconfig \
+ -uboot-envtools -wpad-basic-wolfssl
+ SUPPORTED_DEVICES += lan-turtle
+endef
+TARGET_DEVICES += hak5_lan-turtle
+
+define Device/hak5_packet-squirrel
+ $(Device/tplink-16mlzma)
+ SOC := ar9331
+ DEVICE_VENDOR := Hak5
+ DEVICE_MODEL := Packet Squirrel
+ TPLINK_HWID := 0x5351524c
+ IMAGES := sysupgrade.bin
+ DEVICE_PACKAGES := kmod-usb-chipidea2 -iwinfo -kmod-ath9k -swconfig \
+ -uboot-envtools -wpad-basic-wolfssl
+ SUPPORTED_DEVICES += packet-squirrel
+endef
+TARGET_DEVICES += hak5_packet-squirrel
+
+define Device/hak5_wifi-pineapple-nano
+ $(Device/tplink-16mlzma)
+ SOC := ar9331
+ DEVICE_VENDOR := Hak5
+ DEVICE_MODEL := WiFi Pineapple NANO
+ TPLINK_HWID := 0x4e414e4f
+ IMAGES := sysupgrade.bin
+ DEVICE_PACKAGES := kmod-ath9k-htc kmod-usb-chipidea2 kmod-usb-storage \
+ -swconfig -uboot-envtools
+ SUPPORTED_DEVICES += wifi-pineapple-nano
+endef
+TARGET_DEVICES += hak5_wifi-pineapple-nano
+
define Device/iodata_etg3-r
SOC := ar9342
DEVICE_VENDOR := I-O DATA
endef
TARGET_DEVICES += meraki_mr16
+define Device/mercury_mw4530r-v1
+ $(Device/tplink-8mlzma)
+ SOC := ar9344
+ DEVICE_VENDOR := Mercury
+ DEVICE_MODEL := MW4530R
+ DEVICE_VARIANT := v1
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
+ TPLINK_HWID := 0x45300001
+ SUPPORTED_DEVICES += tl-wdr4300
+endef
+TARGET_DEVICES += mercury_mw4530r-v1
+
define Device/nec_wg1200cr
SOC := qca9563
DEVICE_VENDOR := NEC
SOC := ar9331
DEVICE_VENDOR := PISEN
DEVICE_MODEL := TS-D084
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-chipidea2
+ DEVICE_PACKAGES := kmod-usb-chipidea2
TPLINK_HWID := 0x07030101
endef
TARGET_DEVICES += pisen_ts-d084
SOC := ar9331
DEVICE_VENDOR := PISEN
DEVICE_MODEL := Cloud Easy Power (WMM003N)
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-chipidea2
+ DEVICE_PACKAGES := kmod-usb-chipidea2
TPLINK_HWID := 0x07030101
endef
TARGET_DEVICES += pisen_wmm003n
endef
TARGET_DEVICES += qihoo_c301
+define Device/qxwlan_e750a-v4
+ SOC := ar9344
+ DEVICE_VENDOR := Qxwlan
+ DEVICE_MODEL := E750A
+ DEVICE_PACKAGES := kmod-usb2
+endef
+
+define Device/qxwlan_e750a-v4-16m
+ $(Device/qxwlan_e750a-v4)
+ DEVICE_VARIANT := v4 (16M)
+ IMAGE_SIZE := 15936k
+endef
+TARGET_DEVICES += qxwlan_e750a-v4-16m
+
+define Device/qxwlan_e750a-v4-8m
+ $(Device/qxwlan_e750a-v4)
+ DEVICE_VARIANT := v4 (8M)
+ IMAGE_SIZE := 7744k
+endef
+TARGET_DEVICES += qxwlan_e750a-v4-8m
+
define Device/rosinson_wr818
SOC := qca9563
DEVICE_VENDOR := Rosinson
endef
TARGET_DEVICES += rosinson_wr818
+define Device/samsung_wam250
+ SOC := ar9344
+ DEVICE_VENDOR := Samsung
+ DEVICE_MODEL := WAM250
+ IMAGE_SIZE := 15872k
+ DEVICE_PACKAGES := kmod-usb2
+ SUPPORTED_DEVICES += wam250
+endef
+TARGET_DEVICES += samsung_wam250
+
define Device/siemens_ws-ap3610
SOC := ar7161
DEVICE_VENDOR := Siemens
endef
TARGET_DEVICES += trendnet_tew-823dru
+define Device/wallys_dr531
+ SOC := qca9531
+ DEVICE_VENDOR := Wallys
+ DEVICE_MODEL := DR531
+ DEVICE_PACKAGES := kmod-usb2 rssileds
+ IMAGE_SIZE := 7808k
+ SUPPORTED_DEVICES += dr531
+endef
+TARGET_DEVICES += wallys_dr531
+
define Device/wd_mynet-n750
$(Device/seama)
SOC := ar9344
projects / openwrt / openwrt.git / blobdiff