bcm53xx: enable HIGHMEM to support more than 128 MiB of RAM

[openwrt/openwrt.git] / target / linux / bcm53xx / config-3.18

diff --git a/target/linux/bcm53xx/config-3.18 b/target/linux/bcm53xx/config-3.18
index 3d6f3cdef76d30cd99b50bb6bc5bd88355b267e6..d08e66779439acbcb7fa3559b4c47f66166c4548 100644 (file)
--- a/target/linux/bcm53xx/config-3.18
+++ b/target/linux/bcm53xx/config-3.18
@@ -10,18 +10,13 @@ CONFIG_ARCH_HAS_SG_CHAIN=y
 CONFIG_ARCH_HAS_TICK_BROADCAST=y
 CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_HISI is not set
-# CONFIG_ARCH_MEDIATEK is not set
-# CONFIG_ARCH_MESON is not set
 CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-# CONFIG_ARCH_MSM is not set
 CONFIG_ARCH_MULTIPLATFORM=y
 # CONFIG_ARCH_MULTI_CPU_AUTO is not set
 CONFIG_ARCH_MULTI_V6_V7=y
 CONFIG_ARCH_MULTI_V7=y
 # CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
 CONFIG_ARCH_NR_GPIO=0
-# CONFIG_ARCH_QCOM is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
@@ -50,7 +45,6 @@ CONFIG_ARM_THUMB=y
 # CONFIG_ARM_THUMBEE is not set
 CONFIG_ARM_VIRT_EXT=y
 CONFIG_ATAGS=y
-# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
 CONFIG_AUTO_ZRELADDR=y
 CONFIG_B53=y
 # CONFIG_B53_MMAP_DRIVER is not set
@@ -67,6 +61,7 @@ CONFIG_BCMA_HOST_PCI=y
 CONFIG_BCMA_HOST_PCI_POSSIBLE=y
 CONFIG_BCMA_HOST_SOC=y
 CONFIG_BGMAC=y
+CONFIG_BOUNCE=y
 CONFIG_CACHE_L2X0=y
 CONFIG_CACHE_PL310=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -75,7 +70,6 @@ CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y
 CONFIG_CLKSRC_OF=y
 CONFIG_CLONE_BACKWARDS=y
 CONFIG_COMMON_CLK=y
-# CONFIG_COMMON_CLK_PXA is not set
 CONFIG_CPU_32v6K=y
 CONFIG_CPU_32v7=y
 CONFIG_CPU_ABRT_EV7=y
@@ -100,12 +94,9 @@ CONFIG_DEBUG_BCM_5301X=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_LL=y
 CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-# CONFIG_DEBUG_LL_UART_8250 is not set
-# CONFIG_DEBUG_LL_UART_PL01X is not set
 CONFIG_DEBUG_UART_8250=y
 # CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
 CONFIG_DEBUG_UART_8250_SHIFT=0
-# CONFIG_DEBUG_UART_BCM63XX is not set
 CONFIG_DEBUG_UART_PHYS=0x18000300
 # CONFIG_DEBUG_UART_PL01X is not set
 CONFIG_DEBUG_UART_VIRT=0xf1000300
@@ -122,13 +113,13 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_GENERIC_IDLE_POLL_SETUP=y
 CONFIG_GENERIC_IO=y
 CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_NET_UTILS=y
 CONFIG_GENERIC_PCI_IOMAP=y
 CONFIG_GENERIC_SCHED_CLOCK=y
 CONFIG_GENERIC_SMP_IDLE_THREAD=y
 CONFIG_GENERIC_STRNCPY_FROM_USER=y
 CONFIG_GENERIC_STRNLEN_USER=y
 CONFIG_GPIOLIB=y
+CONFIG_GPIO_74X164=y
 CONFIG_GPIO_DEVRES=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_HANDLE_DOMAIN_IRQ=y
@@ -181,6 +172,8 @@ CONFIG_HAVE_SMP=y
 CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_HAVE_UID16=y
 CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HIGHMEM=y
+# CONFIG_HIGHPTE is not set
 CONFIG_HZ_FIXED=0
 CONFIG_HZ_PERIODIC=y
 CONFIG_INITRAMFS_SOURCE=""
@@ -204,7 +197,7 @@ CONFIG_MTD_NAND_ECC=y
 # CONFIG_MTD_PHYSMAP_OF is not set
 CONFIG_MTD_SPI_BCM53XXSPIFLASH=y
 CONFIG_MTD_SPI_NOR=y
-# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
+CONFIG_MTD_SPLIT_SUPPORT=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_BEB_LIMIT=20
 CONFIG_MTD_UBI_BLOCK=y
@@ -237,7 +230,7 @@ CONFIG_OUTER_CACHE_SYNC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PCI=y
-CONFIG_PCI_BCMA=y
+CONFIG_PCI_BCM5301X=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PERF_USE_VMALLOC=y
 CONFIG_PHYLIB=y
@@ -253,13 +246,15 @@ CONFIG_RWSEM_SPIN_ON_OWNER=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_SCHED_HRTICK=y
 # CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_EARLYCON=y
+# CONFIG_SECCOMP is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SMP=y
 CONFIG_SMP_ON_UP=y
 CONFIG_SPARSE_IRQ=y
 CONFIG_SPI=y
 CONFIG_SPI_BCM53XX=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
 CONFIG_SPI_MASTER=y
 CONFIG_STOP_MACHINE=y
 CONFIG_SWCONFIG=y