bcm53xx: update the ethernet core hacks

[openwrt/openwrt.git] / target / linux / bcm53xx / patches-3.10 / 202-bgmac-make-bgmac-work-on-systems-without-nvram.patch

diff --git a/target/linux/bcm53xx/patches-3.10/202-bgmac-make-bgmac-work-on-systems-without-nvram.patch b/target/linux/bcm53xx/patches-3.10/202-bgmac-make-bgmac-work-on-systems-without-nvram.patch
index 98fd788f5b5f9ab660031d6a1b1b738f88aca79c..e11a31f1f214d047495ec9c249f90c855b247d77 100644 (file)
--- a/target/linux/bcm53xx/patches-3.10/202-bgmac-make-bgmac-work-on-systems-without-nvram.patch
+++ b/target/linux/bcm53xx/patches-3.10/202-bgmac-make-bgmac-work-on-systems-without-nvram.patch
@@ -1,9 +1,10 @@
-bgmac: make bgmac work on systems without nvram
+These are some hackish patches to make the Ethernet driver work somehow
+on this arm core.
+The flash driver is not working, so we removed the nvram reading, this 
+should be changed after we have a flash driver.
+The mdelay(1) is a ugly workaround for this arm chip, this seams to be a dma problem.
 
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/net/ethernet/broadcom/bgmac.c |    4 ++++
- 1 file changed, 4 insertions(+)
+The PHY says it is not connected by default, just ignore it.
 
 --- a/drivers/net/ethernet/broadcom/Kconfig
 +++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -30,7 +31,18 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
  
  static const struct bcma_device_id bgmac_bcma_tbl[] = {
        BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_4706_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS),
-@@ -1445,7 +1449,7 @@ static int bgmac_probe(struct bcma_devic
+@@ -165,6 +169,10 @@ static netdev_tx_t bgmac_dma_tx_add(stru
+ 
+       netdev_sent_queue(net_dev, skb->len);
+ 
++      if (bgmac->core->bus->chipinfo.id == BCMA_CHIP_ID_BCM4707 ||
++          bgmac->core->bus->chipinfo.id == BCMA_CHIP_ID_BCM53018)
++              mdelay(1);
++
+       wmb();
+ 
+       /* Increase ring->end to point empty slot. We tell hardware the first
+@@ -1438,7 +1446,7 @@ static int bgmac_probe(struct bcma_devic
        int err;
  
        /* We don't support 2nd, 3rd, ... units, SPROM has to be adjusted */
@@ -39,7 +51,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
                pr_err("Unsupported core_unit %d\n", core->core_unit);
                return -ENOTSUPP;
        }
-@@ -1541,8 +1545,7 @@ static int bgmac_probe(struct bcma_devic
+@@ -1534,8 +1542,7 @@ static int bgmac_probe(struct bcma_devic
        /* TODO: reset the external phy. Specs are needed */
        bgmac_phy_reset(bgmac);
  
@@ -49,3 +61,14 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
        if (bgmac->has_robosw)
                bgmac_warn(bgmac, "Support for Roboswitch not implemented\n");
  
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -814,7 +814,7 @@ int genphy_update_link(struct phy_device
+               return status;
+ 
+       if ((status & BMSR_LSTATUS) == 0)
+-              phydev->link = 0;
++              phydev->link = 1;
+       else
+               phydev->link = 1;
+