kernel: enable EXPORTFS by default

[openwrt/openwrt.git] / target / linux / brcm63xx / dts / dsl-274xb-f.dts

diff --git a/target/linux/brcm63xx/dts/dsl-274xb-f.dts b/target/linux/brcm63xx/dts/dsl-274xb-f.dts
index f8ad084a7c1ce54a8c565d90f44053f83fe4641c..8b9acaa778b7551d671e5a7de9cabd6559a78c35 100644 (file)
--- a/target/linux/brcm63xx/dts/dsl-274xb-f.dts
+++ b/target/linux/brcm63xx/dts/dsl-274xb-f.dts
@@ -1,11 +1,18 @@
 /dts-v1/;
 
-/include/ "bcm6328.dtsi"
+#include "bcm6328.dtsi"
+
+#include <dt-bindings/input/input.h>
 
 / {
        model = "D-Link DSL-2740B/DSL-2741B rev F1";
        compatible = "d-link,dsl-274xb-f", "brcm,bcm6328";
 
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
@@ -15,18 +22,18 @@
 
                wifi {
                        label = "wifi";
-                       gpios = <&gpio0 10 1>;
-                       linux,code = <0xee>;
+                       gpios = <&pinctrl 10 1>;
+                       linux,code = <KEY_WLAN>;
                };
                reset {
                        label = "reset";
-                       gpios = <&gpio0 23 1>;
-                       linux,code = <0x198>;
+                       gpios = <&pinctrl 23 1>;
+                       linux,code = <KEY_RESTART>;
                };
                wps {
                        label = "wps";
-                       gpios = <&gpio0 24 1>;
-                       linux,code = <0x211>;
+                       gpios = <&pinctrl 24 1>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
        };
 
@@ -35,28 +42,78 @@
 
                inet_red {
                        label = "dsl-274xb:red:internet";
-                       gpios = <&gpio0 2 1>;
+                       gpios = <&pinctrl 2 1>;
                };
                dsl_green {
                        label = "dsl-274xb:green:dsl";
-                       gpios = <&gpio0 3 1>;
+                       gpios = <&pinctrl 3 1>;
                };
                power_green {
                        label = "dsl-274xb:green:power";
-                       gpios = <&gpio0 4 1>;
+                       gpios = <&pinctrl 4 1>;
                        default-state = "on";
                };
                power_red {
                        label = "dsl-274xb:red:power";
-                       gpios = <&gpio0 8 1>;
+                       gpios = <&pinctrl 8 1>;
                };
                wps_blue {
                        label = "dsl-274xb:blue:wps";
-                       gpios = <&gpio0 9 1>;
+                       gpios = <&pinctrl 9 1>;
                };
                inet_green {
                        label = "dsl-274xb:green:internet";
-                       gpios = <&gpio0 11 1>;
+                       gpios = <&pinctrl 11 1>;
+               };
+       };
+};
+
+&hsspi {
+       status = "ok";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <16666667>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+               reg = <0>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               linux,part-probe = "bcm63xxpart";
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       cfe@0 {
+                               reg = <0x000000 0x010000>;
+                               label = "cfe";
+                               read-only;
+                       };
+
+                       linux@10000 {
+                               reg = <0x010000 0x7c0000>;
+                               label = "linux";
+                               compatible = "brcm,bcm963xx-imagetag";
+                       };
+
+                       cal_data@7d0000 {
+                               reg = <0x7d0000 0x010000>;
+                               label = "cal_data";
+                               read-only;
+                       };
+
+                       nvram@7e0000 {
+                               reg = <0x7e0000 0x020000>;
+                               label = "nvram";
+                       };
                };
        };
 };
+
+&uart0 {
+       status = "ok";
+};