brcm63xx: register serial through device tree

[openwrt/openwrt.git] / target / linux / brcm63xx / dts / spw500v.dts

diff --git a/target/linux/brcm63xx/dts/spw500v.dts b/target/linux/brcm63xx/dts/spw500v.dts
index 2fcf958e8e9e86781b804cb1319b546087d73104..c7a4c7dfd294162829d90bca0d80a5dbacfa45f7 100644 (file)
--- a/target/linux/brcm63xx/dts/spw500v.dts
+++ b/target/linux/brcm63xx/dts/spw500v.dts
@@ -8,6 +8,11 @@
        model = "T-Com Speedport W500 V";
        compatible = "t-com,spw500v", "brcm,bcm6348";
 
+       chosen {
+               bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
@@ -17,7 +22,7 @@
 
                reset {
                        label = "reset";
-                       gpios = <&gpio1 1 1>;
+                       gpios = <&pinctrl 33 1>;
                        linux,code = <KEY_RESTART>;
                };
        };
@@ -27,24 +32,24 @@
 
                power_green {
                        label = "SPW500V:green:power";
-                       gpios = <&gpio0 0 1>;
+                       gpios = <&pinctrl 0 1>;
                        default-state = "on";
                };
                power_red {
                        label = "SPW500V:red:power";
-                       gpios = <&gpio0 1 1>;
+                       gpios = <&pinctrl 1 1>;
                };
                ppp_green {
                        label = "SPW500V:green:ppp";
-                       gpios = <&gpio0 3 1>;
+                       gpios = <&pinctrl 3 1>;
                };
                pstn_green {
                        label = "SPW500V:green:pstn";
-                       gpios = <&gpio0 28 1>;
+                       gpios = <&pinctrl 28 1>;
                };
                voip_green {
                        label = "SPW500V:green:voip";
-                       gpios = <&gpio1 0 1>;
+                       gpios = <&pinctrl 32 1>;
                };
        };
 };
@@ -70,3 +75,12 @@
                reg = <0x3f0000 0x010000>;
        };
 };
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci>;
+};
+
+&uart0 {
+       status = "ok";
+};