ath79, brcm63xx: Fix debounce-interval properties in gpio-keys-polled nodes
[openwrt/openwrt.git] / target / linux / brcm63xx / dts / wap-5813n.dts
index d5c0a5f1b727fa14b2a824c61976448f601752c3..298d7791b27bd183fda385f5b6f008668f4619c9 100644 (file)
@@ -9,7 +9,8 @@
        compatible = "comtrend,wap-5813n", "brcm,bcm6368";
 
        chosen {
        compatible = "comtrend,wap-5813n", "brcm,bcm6368";
 
        chosen {
-               bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
        };
 
        gpio-keys-polled {
        };
 
        gpio-keys-polled {
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
-               debounce-interval = <60>;
 
                wlan {
                        label = "wlan";
                        gpios = <&pinctrl 32 1>;
                        linux,code = <KEY_WLAN>;
 
                wlan {
                        label = "wlan";
                        gpios = <&pinctrl 32 1>;
                        linux,code = <KEY_WLAN>;
+                       debounce-interval = <60>;
                };
                };
+
                reset {
                        label = "reset";
                        gpios = <&pinctrl 34 1>;
                        linux,code = <KEY_RESTART>;
                reset {
                        label = "reset";
                        gpios = <&pinctrl 34 1>;
                        linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
                };
                };
+
                wps {
                        label = "wps";
                        gpios = <&pinctrl 35 1>;
                        linux,code = <KEY_WPS_BUTTON>;
                wps {
                        label = "wps";
                        gpios = <&pinctrl 35 1>;
                        linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
                };
        };
 
                };
        };
 
 &pflash {
        status = "ok";
 
 &pflash {
        status = "ok";
 
-       linux,part-probe = "bcm63xxpart";
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
 
 
-       cfe@0 {
-               label = "CFE";
-               reg = <0x000000 0x010000>;
-               read-only;
-       };
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
 
 
-       linux@10000 {
-               label = "linux";
-               reg = <0x010000 0x7e0000>;
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x7e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@7f0000 {
+                       label = "nvram";
+                       reg = <0x7f0000 0x010000>;
+               };
        };
        };
+};
+
+&lsspi {
+       switch@0 {
+               compatible = "brcm,bcm53115";
+               reg = <0>;
+               spi-max-frequency = <781000>;
+
+               lede,alias = "eth0";
 
 
-       nvram@7f0000 {
-               label = "nvram";
-               reg = <0x7f0000 0x010000>;
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       lan@0 {
+                               reg = <0>;
+                               label = "lan4";
+                       };
+
+                       lan@1 {
+                               reg = <1>;
+                               label = "lan3";
+                       };
+
+                       lan@2 {
+                               reg = <2>;
+                               label = "lan2";
+                       };
+
+                       lan@3 {
+                               reg = <3>;
+                               label = "lan1";
+                       };
+
+                       wan@4 {
+                               reg = <4>;
+                               label = "wan";
+                       };
+
+                       cpu@5 {
+                               reg = <5>;
+                               label = "cpu";
+
+                               fixed-link {
+                                       speed = <1000>;
+                                       full-duplex;
+                                       asym-pause;
+                                       pause;
+                               };
+                       };
+               };
        };
 };
 
        };
 };
 
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_pci>;
 };
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_pci>;
 };
+
+&uart0 {
+       status = "ok";
+};