brcm63xx: F@ST2504n board support (image, base-files)

[openwrt/openwrt.git] / target / linux / brcm63xx / image / Makefile

diff --git a/target/linux/brcm63xx/image/Makefile b/target/linux/brcm63xx/image/Makefile
index 69621dc5aee16ff4b4f2847b975d10daebc24a70..8f661d2d6667e40715d047b80a2876f10eab4423 100755 (executable)
--- a/target/linux/brcm63xx/image/Makefile
+++ b/target/linux/brcm63xx/image/Makefile
@@ -1,4 +1,4 @@
-# 
+#
 # Copyright (C) 2006-2011 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
@@ -119,6 +119,12 @@ define Image/Build/CFEOLD
                -o $(BIN_DIR)/openwrt-$(2)-$(1)-cfe.bin
 endef
 
+define Image/Build/HCS
+       $(STAGING_DIR_HOST)/bin/hcsmakeimage --magic_byte=$(3) \
+               --rev_maj=$(4) --rev_min=$(5) --input_file=$(6) \
+               --output_file=$(BIN_DIR)/openwrt-$(2)-$(1).bin
+endef
+
 define Build/Clean
        $(MAKE) -C lzma-loader clean
 endef
@@ -151,10 +157,14 @@ define Image/Prepare
        $(call prepare_generic_squashfs,$(KDIR)/fs_mark)
 endef
 
+define Image/Build/Initramfs
+       # Netgear CVG834G
+       $(call Image/Build/HCS,initramfs,cvg834g,a020,0001,0022,$(KDIR)/vmlinux-initramfs)
+endef
+
 define Image/Build
        dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
        # Various routers
-  ifeq ($(CONFIG_TARGET_brcm63xx_generic),y)
        $(call Image/Build/CFE,$(1),96328avng,6328,96328avng-4M-flash-generic,,--pad 2)
        $(call Image/Build/CFE,$(1),96328avng,6328,96328avng-8M-flash-generic,,--pad 4)
        $(call Image/Build/CFE,$(1),96328avng,6328,96328avng-16M-flash-generic,,--pad 8)
@@ -177,11 +187,11 @@ define Image/Build
        $(call Image/Build/CFE,$(1),96348A-122,6348,96348A-122-generic)
        $(call Image/Build/CFE,$(1),96358VW,6358,96358VW-generic)
        $(call Image/Build/CFE,$(1),96358VW2,6358,96358VW2-generic)
-  endif
        $(call Image/Build/CFE,$(1),96368MVNgr,6368,96368MVNgr-generic)
        $(call Image/Build/CFE,$(1),96368MVWG,6368,96368MVWG-generic)
 
-  ifeq ($(CONFIG_TARGET_brcm63xx_generic),y)
+       # Asmax AR 1004g
+       $(call Image/Build/CFEFIXUP,$(1),96348GW-10,AR1004G,6348,AR1004G)
        # BT Voyager V210_BTR
        $(call Image/Build/CFE,$(1),V210_BB,6348,BTV210_BTR,,--layoutver 5)
        # BT Voyager V210_ROI, V210_WB
@@ -206,12 +216,13 @@ define Image/Build
        $(call Image/Build/CFEFIXUP,$(1),96348GW,GW6200,6348,GW6200,$(shell printf '\x99'))
        # Neufbox4
        $(call Image/Build/CFE,$(1),96358VW,6358,NEUFBOX4,OpenWRT-$(REVISION))
-  endif
 
        # Neufbox6
        $(call Image/Build/CFE,$(1),NB6-SER-r0,6362,NEUFBOX6,OpenWRT-$(REVISION))
 
-  ifeq ($(CONFIG_TARGET_brcm63xx_generic),y)
+       # Sagem F@ST2504n
+       $(call Image/Build/CFE,$(1),F@ST2504n,6362,F@ST2504n,OpenWRT-$(REVISION))
+
        # Comtrend 6373
        $(call Image/Build/CFE,$(1),CT6373-1,6358,CT6373)
        # Comtrend 536, 5621
@@ -249,6 +260,9 @@ define Image/Build
        # Sagem F@ST2604
        $(call Image/Build/CFE,$(1),F@ST2604,6348,F@ST2604-cfe)
        $(call Image/Build/CFE,$(1),F@ST2604,6348,F@ST2604,OpenWRT-$(REVISION))
+       # Sagem F@ST2704V2
+       $(call Image/Build/CFE,$(1),F@ST2704V2,6328,F@ST2704V2-cfe)
+       $(call Image/Build/CFE,$(1),F@ST2704V2,6328,F@ST2704V2,OpenWRT-$(REVISION))
        # Inventel Livebox
        $(call Image/Build/RedBoot,livebox)
        # Pirelli Alice Gate VoIP 2 Plus Wi-Fi AGPF-S0
@@ -279,6 +293,12 @@ define Image/Build
 
        # T-Com Speedport W 303V Typ B
        $(call Image/Build/SPW303V,$(1),96358-502V,6358,SPW303V)
+
+       # Netgear CVG834G
+       $(call Image/Build/HCS,$(1),cvg834g,a020,0001,0022,$(KDIR)/vmlinux)
+
+  ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
+       $(call Image/Build/Initramfs)
   endif
 endef