ar8xxx_write(priv, AR8327_REG_PAD0_MODE, t);
t = ar8327_get_pad_cfg(pdata->pad5_cfg);
+ if (chip_is_ar8337(priv)) {
+ /*
+ * Workaround: RGMII RX delay setting needs to be
+ * always specified for AR8337 to avoid port 5
+ * RX hang on high traffic / flood conditions
+ */
+ t |= AR8327_PAD_RGMII_RXCLK_DELAY_EN;
+ }
ar8xxx_write(priv, AR8327_REG_PAD5_MODE, t);
t = ar8327_get_pad_cfg(pdata->pad6_cfg);
ar8xxx_write(priv, AR8327_REG_PAD6_MODE, t);
if (!priv->chip_data)
return -ENOMEM;
- if (priv->phy->dev.of_node)
- ret = ar8327_hw_config_of(priv, priv->phy->dev.of_node);
+ if (priv->phy->mdio.dev.of_node)
+ ret = ar8327_hw_config_of(priv, priv->phy->mdio.dev.of_node);
else
ret = ar8327_hw_config_pdata(priv,
- priv->phy->dev.platform_data);
+ priv->phy->mdio.dev.platform_data);
if (ret)
return ret;
/* Disable EEE on all phy's due to stability issues */
for (i = 0; i < AR8XXX_NUM_PHYS; i++)
data->eee[i] = false;
+
+ if (chip_is_ar8337(priv)) {
+ /* Update HOL registers with values suggested by QCA switch team */
+ for (i = 0; i < AR8327_NUM_PORTS; i++) {
+ if (i == AR8216_PORT_CPU || i == 5 || i == 6) {
+ t = 0x3 << AR8327_PORT_HOL_CTRL0_EG_PRI0_BUF_S;
+ t |= 0x4 << AR8327_PORT_HOL_CTRL0_EG_PRI1_BUF_S;
+ t |= 0x4 << AR8327_PORT_HOL_CTRL0_EG_PRI2_BUF_S;
+ t |= 0x4 << AR8327_PORT_HOL_CTRL0_EG_PRI3_BUF_S;
+ t |= 0x6 << AR8327_PORT_HOL_CTRL0_EG_PRI4_BUF_S;
+ t |= 0x8 << AR8327_PORT_HOL_CTRL0_EG_PRI5_BUF_S;
+ t |= 0x1e << AR8327_PORT_HOL_CTRL0_EG_PORT_BUF_S;
+ } else {
+ t = 0x3 << AR8327_PORT_HOL_CTRL0_EG_PRI0_BUF_S;
+ t |= 0x4 << AR8327_PORT_HOL_CTRL0_EG_PRI1_BUF_S;
+ t |= 0x6 << AR8327_PORT_HOL_CTRL0_EG_PRI2_BUF_S;
+ t |= 0x8 << AR8327_PORT_HOL_CTRL0_EG_PRI3_BUF_S;
+ t |= 0x19 << AR8327_PORT_HOL_CTRL0_EG_PORT_BUF_S;
+ }
+ ar8xxx_write(priv, AR8327_REG_PORT_HOL_CTRL0(i), t);
+
+ t = 0x6 << AR8327_PORT_HOL_CTRL1_ING_BUF_S;
+ t |= AR8327_PORT_HOL_CTRL1_EG_PRI_BUF_EN;
+ t |= AR8327_PORT_HOL_CTRL1_EG_PORT_BUF_EN;
+ t |= AR8327_PORT_HOL_CTRL1_WRED_EN;
+ ar8xxx_rmw(priv, AR8327_REG_PORT_HOL_CTRL1(i),
+ AR8327_PORT_HOL_CTRL1_ING_BUF |
+ AR8327_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
+ AR8327_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
+ AR8327_PORT_HOL_CTRL1_WRED_EN,
+ t);
+ }
+ }
}
static void
t = pvid << AR8327_PORT_VLAN0_DEF_SVID_S;
t |= pvid << AR8327_PORT_VLAN0_DEF_CVID_S;
+ if (priv->vlan && priv->port_vlan_prio[port] > 0) {
+ u32 prio = priv->port_vlan_prio[port];
+
+ t |= prio << AR8327_PORT_VLAN0_DEF_SPRI_S;
+ t |= prio << AR8327_PORT_VLAN0_DEF_CPRI_S;
+ }
ar8xxx_write(priv, AR8327_REG_PORT_VLAN0(port), t);
t = AR8327_PORT_VLAN1_PORT_VLAN_PROP;
t |= egress << AR8327_PORT_VLAN1_OUT_MODE_S;
+ if (priv->vlan && priv->port_vlan_prio[port] > 0)
+ t |= AR8327_PORT_VLAN1_VLAN_PRI_PROP;
+
ar8xxx_write(priv, AR8327_REG_PORT_VLAN1(port), t);
t = members;
pr_err("ar8327: timeout waiting for atu to become ready\n");
}
-#if 0
static void ar8327_get_arl_entry(struct ar8xxx_priv *priv,
struct arl_entry *a, u32 *status, enum arl_op op)
{
break;
}
}
-#endif
static int
ar8327_sw_hw_apply(struct switch_dev *dev)
return 0;
}
+static int
+ar8327_sw_set_port_vlan_prio(struct switch_dev *dev, const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
+ int port = val->port_vlan;
+
+ if (port >= dev->ports)
+ return -EINVAL;
+ if (port == 0 || port == 6)
+ return -EOPNOTSUPP;
+ if (val->value.i < 0 || val->value.i > 7)
+ return -EINVAL;
+
+ priv->port_vlan_prio[port] = val->value.i;
+
+ return 0;
+}
+
+static int
+ar8327_sw_get_port_vlan_prio(struct switch_dev *dev, const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
+ int port = val->port_vlan;
+
+ val->value.i = priv->port_vlan_prio[port];
+
+ return 0;
+}
+
static const struct switch_attr ar8327_sw_attr_globals[] = {
{
.type = SWITCH_TYPE_INT,
.get = ar8327_sw_get_port_igmp_snooping,
.max = 1
},
+ {
+ .type = SWITCH_TYPE_INT,
+ .name = "vlan_prio",
+ .description = "Port VLAN default priority (VLAN PCP) (0-7)",
+ .set = ar8327_sw_set_port_vlan_prio,
+ .get = ar8327_sw_get_port_vlan_prio,
+ .max = 7,
+ },
};
static const struct switch_dev_ops ar8327_sw_ops = {
.apply_config = ar8327_sw_hw_apply,
.reset_switch = ar8xxx_sw_reset_switch,
.get_port_link = ar8xxx_sw_get_port_link,
+/* The following op is disabled as it hogs the CPU and degrades performance.
+ An implementation has been attempted in 4d8a66d but reading MIB data is slow
+ on ar8xxx switches.
+
+ The high CPU load has been traced down to the ar8xxx_reg_wait() call in
+ ar8xxx_mib_op(), which has to usleep_range() till the MIB busy flag set by
+ the request to update the MIB counter is cleared. */
+#if 0
+ .get_port_stats = ar8xxx_sw_get_port_stats,
+#endif
};
const struct ar8xxx_chip ar8327_chip = {
.atu_flush_port = ar8327_atu_flush_port,
.vtu_flush = ar8327_vtu_flush,
.vtu_load_vlan = ar8327_vtu_load_vlan,
- .phy_fixup = ar8327_phy_fixup,
.set_mirror_regs = ar8327_set_mirror_regs,
-#if 0
.get_arl_entry = ar8327_get_arl_entry,
-#endif
.sw_hw_apply = ar8327_sw_hw_apply,
.num_mibs = ARRAY_SIZE(ar8236_mibs),
.vtu_load_vlan = ar8327_vtu_load_vlan,
.phy_fixup = ar8327_phy_fixup,
.set_mirror_regs = ar8327_set_mirror_regs,
-#if 0
.get_arl_entry = ar8327_get_arl_entry,
-#endif
.sw_hw_apply = ar8327_sw_hw_apply,
.num_mibs = ARRAY_SIZE(ar8236_mibs),
projects / openwrt / openwrt.git / blobdiff