ipq40xx: add support for EZVIZ CS-W3-WD1200G EUP

[openwrt/openwrt.git] / target / linux / ipq40xx / base-files / etc / hotplug.d / firmware / 11-ath10k-caldata

diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index e82ffbea9d7b53b75cab1c06f6846f07dbb187fe..3616bff578e8f3e4d46734d8540efe1152d16626 100644 (file)
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -45,11 +45,17 @@ case "$FIRMWARE" in
        case "$board" in
        8dev,jalapeno |\
        alfa-network,ap120c-ac |\
+       cilab,meshpoint-one |\
+       ezviz,cs-w3-wd1200g-eup |\
        glinet,gl-b1300 |\
        linksys,ea6350v3 |\
        qcom,ap-dk01.1-c1)
                caldata_extract "ART" 0x1000 0x2f20
                ;;
+       aruba,ap-303)
+               caldata_extract "ART" 0x1000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_binary mfginfo 0x1D)
+               ;;
        asus,map-ac2200)
                caldata_extract_ubi "Factory" 0x1000 0x2f20
                ;;
@@ -61,6 +67,7 @@ case "$FIRMWARE" in
                /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
                ;;
        avm,fritzbox-7530 |\
+       avm,fritzrepeater-1200 |\
        avm,fritzrepeater-3000)
                /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
                /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
@@ -69,6 +76,7 @@ case "$FIRMWARE" in
                /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
                /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
                ;;
+       compex,wpj419 |\
        compex,wpj428 |\
        engenius,eap1300 |\
        openmesh,a42 |\
@@ -107,11 +115,17 @@ case "$FIRMWARE" in
        case "$board" in
        8dev,jalapeno |\
        alfa-network,ap120c-ac |\
+       cilab,meshpoint-one |\
+       ezviz,cs-w3-wd1200g-eup |\
        glinet,gl-b1300 |\
        linksys,ea6350v3 |\
        qcom,ap-dk01.1-c1)
                caldata_extract "ART" 0x5000 0x2f20
                ;;
+       aruba,ap-303)
+               caldata_extract "ART" 0x5000 0x2f20
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mfginfo 0x1D) +1)
+               ;;
        asus,map-ac2200)
                caldata_extract_ubi "Factory" 0x5000 0x2f20
                ;;
@@ -123,6 +137,7 @@ case "$FIRMWARE" in
                /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
                ;;
        avm,fritzbox-7530 |\
+       avm,fritzrepeater-1200 |\
        avm,fritzrepeater-3000)
                /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
                /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
@@ -131,6 +146,7 @@ case "$FIRMWARE" in
                /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
                /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
                ;;
+       compex,wpj419 |\
        compex,wpj428 |\
        engenius,eap1300 |\
        openmesh,a42 |\