ipq40xx: add netgear wac510 support

[openwrt/openwrt.git] / target / linux / ipq40xx / base-files / etc / hotplug.d / firmware / 11-ath10k-caldata

diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 7293438dfa00b2fdb6bb86ca853503178badf232..42cb295496a65387976e90234edbf0ba82e017b8 100644 (file)
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -55,6 +55,7 @@ case "$FIRMWARE" in
        alfa-network,ap120c-ac |\
        cilab,meshpoint-one |\
        ezviz,cs-w3-wd1200g-eup |\
+       glinet,gl-ap1300 |\
        glinet,gl-b1300 |\
        glinet,gl-s1300 |\
        linksys,ea6350v3 |\
@@ -139,11 +140,20 @@ case "$FIRMWARE" in
                caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
                ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +2)
                ;;
+       mikrotik,hap-ac2)
+               wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
+               ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x0 0x2f20 ) || \
+               ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x0 0x2f20 )
+               ;;
        netgear,ex6100v2 |\
        netgear,ex6150v2)
                caldata_extract "ART" 0x1000 0x2f20
                ath10k_patch_mac $(mtd_get_mac_binary dnidata 0x0)
                ;;
+       netgear,wac510)
+               caldata_extract "0:ART" 0x1000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_binary "0:MANUDATA" 0x6)
+               ;;
        zyxel,nbg6617 |\
        zyxel,wre6606)
                caldata_extract "ART" 0x1000 0x2f20
@@ -158,6 +168,7 @@ case "$FIRMWARE" in
        alfa-network,ap120c-ac |\
        cilab,meshpoint-one |\
        ezviz,cs-w3-wd1200g-eup |\
+       glinet,gl-ap1300 |\
        glinet,gl-b1300 |\
        glinet,gl-s1300 |\
        linksys,ea6350v3 |\
@@ -242,11 +253,21 @@ case "$FIRMWARE" in
                caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
                ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +3)
                ;;
+       mikrotik,hap-ac2|\
+       mikrotik,sxtsq-5-ac)
+               wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
+               ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x8000 0x2f20 ) || \
+               ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x0 0x2f20 )
+               ;;
        netgear,ex6100v2 |\
        netgear,ex6150v2)
                caldata_extract "ART" 0x5000 0x2f20
                ath10k_patch_mac $(mtd_get_mac_binary dnidata 0xc)
                ;;
+       netgear,wac510)
+               caldata_extract "0:ART" 0x5000 0x2f20
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:MANUDATA" 0x6) +16)
+               ;;
        zyxel,nbg6617 |\
        zyxel,wre6606)
                caldata_extract "ART" 0x5000 0x2f20