projects / openwrt / openwrt.git / blobdiff
? search:
summary | shortlog | log | commit | commitdiff | tree
raw | inline | side by side
ipq40xx: add netgear wac510 support
[openwrt/openwrt.git] / target / linux / ipq40xx / base-files / etc / hotplug.d / firmware / 11-ath10k-caldata
diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index bdb12b2921b9ab892b9fe0e780f7090f4e83994f..42cb295496a65387976e90234edbf0ba82e017b8 100644 (file)
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -31,25 +31,44 @@ case "$FIRMWARE" in
                /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
                /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
                ;;
-       linksys,ea8300)
+       buffalo,wtr-m2133hp)
                caldata_extract "ART" 0x9000 0x2f20
-               # OEM assigns 4 sequential MACs
-               ath10k_patch_mac $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
+               ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x32)
                ;;
-       openmesh,a62)
+       engenius,eap2200 |\
+       openmesh,a62 |\
+       plasmacloud,pa2200)
                caldata_extract "0:ART" 0x9000 0x2f20
                ;;
+       linksys,ea8300 |\
+       linksys,mr8300)
+               caldata_extract "ART" 0x9000 0x2f20
+               # OEM assigns 4 sequential MACs
+               ath10k_patch_mac $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
+               ;;
        esac
        ;;
 "ath10k/pre-cal-ahb-a000000.wifi.bin")
        case "$board" in
+       8dev,habanero-dvk |\
        8dev,jalapeno |\
        alfa-network,ap120c-ac |\
+       cilab,meshpoint-one |\
+       ezviz,cs-w3-wd1200g-eup |\
+       glinet,gl-ap1300 |\
        glinet,gl-b1300 |\
+       glinet,gl-s1300 |\
        linksys,ea6350v3 |\
+       mobipromo,cm520-79f |\
        qcom,ap-dk01.1-c1)
                caldata_extract "ART" 0x1000 0x2f20
                ;;
+       aruba,ap-303 |\
+       aruba,ap-303h |\
+       aruba,ap-365)
+               caldata_extract "ART" 0x1000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_binary mfginfo 0x1D)
+               ;;
        asus,map-ac2200)
                caldata_extract_ubi "Factory" 0x1000 0x2f20
                ;;
@@ -61,6 +80,7 @@ case "$FIRMWARE" in
                /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
                ;;
        avm,fritzbox-7530 |\
+       avm,fritzrepeater-1200 |\
        avm,fritzrepeater-3000)
                /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
                /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
@@ -69,19 +89,49 @@ case "$FIRMWARE" in
                /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
                /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
                ;;
+       buffalo,wtr-m2133hp)
+               caldata_extract "ART" 0x1000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x26)
+               ;;
+       cellc,rtl30vw |\
+       compex,wpj419 |\
        compex,wpj428 |\
+       edgecore,ecw5211 |\
+       edgecore,oap100 |\
        engenius,eap1300 |\
+       engenius,eap2200 |\
+       luma,wrtq-329acn|\
        openmesh,a42 |\
        openmesh,a62 |\
+       plasmacloud,pa1200 |\
+       plasmacloud,pa2200 |\
        qxwlan,e2600ac-c1 |\
-       qxwlan,e2600ac-c2)
+       qxwlan,e2600ac-c2 |\
+       unielec,u4019-32m)
+               caldata_extract "0:ART" 0x1000 0x2f20
+               ;;
+       devolo,magic-2-wifi-next)
+               caldata_extract "ART" 0x1000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress0)
+               ;;
+       dlink,dap-2610)
+               caldata_extract "ART" 0x1000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac)
+               ;;
+       engenius,emd1)
+               caldata_extract "0:ART" 0x1000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr)
+               ;;
+       engenius,emr3500)
                caldata_extract "0:ART" 0x1000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
                ;;
        engenius,ens620ext)
                caldata_extract "ART" 0x1000 0x2f20
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
                ;;
-       linksys,ea8300)
+       linksys,ea8300 |\
+       linksys,mr8300)
                caldata_extract "ART" 0x1000 0x2f20
                ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
                ;;
@@ -90,11 +140,20 @@ case "$FIRMWARE" in
                caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
                ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +2)
                ;;
+       mikrotik,hap-ac2)
+               wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
+               ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x0 0x2f20 ) || \
+               ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x0 0x2f20 )
+               ;;
        netgear,ex6100v2 |\
        netgear,ex6150v2)
                caldata_extract "ART" 0x1000 0x2f20
                ath10k_patch_mac $(mtd_get_mac_binary dnidata 0x0)
                ;;
+       netgear,wac510)
+               caldata_extract "0:ART" 0x1000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_binary "0:MANUDATA" 0x6)
+               ;;
        zyxel,nbg6617 |\
        zyxel,wre6606)
                caldata_extract "ART" 0x1000 0x2f20
@@ -104,13 +163,25 @@ case "$FIRMWARE" in
        ;;
 "ath10k/pre-cal-ahb-a800000.wifi.bin")
        case "$board" in
+       8dev,habanero-dvk |\
        8dev,jalapeno |\
        alfa-network,ap120c-ac |\
+       cilab,meshpoint-one |\
+       ezviz,cs-w3-wd1200g-eup |\
+       glinet,gl-ap1300 |\
        glinet,gl-b1300 |\
+       glinet,gl-s1300 |\
        linksys,ea6350v3 |\
+       mobipromo,cm520-79f |\
        qcom,ap-dk01.1-c1)
                caldata_extract "ART" 0x5000 0x2f20
                ;;
+       aruba,ap-303 |\
+       aruba,ap-303h |\
+       aruba,ap-365)
+               caldata_extract "ART" 0x5000 0x2f20
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mfginfo 0x1D) +1)
+               ;;
        asus,map-ac2200)
                caldata_extract_ubi "Factory" 0x5000 0x2f20
                ;;
@@ -122,6 +193,7 @@ case "$FIRMWARE" in
                /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
                ;;
        avm,fritzbox-7530 |\
+       avm,fritzrepeater-1200 |\
        avm,fritzrepeater-3000)
                /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
                /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
@@ -130,19 +202,49 @@ case "$FIRMWARE" in
                /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
                /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
                ;;
+       buffalo,wtr-m2133hp)
+               caldata_extract "ART" 0x5000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x2c)
+               ;;
+       cellc,rtl30vw |\
+       compex,wpj419 |\
        compex,wpj428 |\
+       edgecore,ecw5211 |\
+       edgecore,oap100 |\
        engenius,eap1300 |\
+       engenius,eap2200 |\
+       luma,wrtq-329acn|\
        openmesh,a42 |\
        openmesh,a62 |\
+       plasmacloud,pa1200 |\
+       plasmacloud,pa2200 |\
        qxwlan,e2600ac-c1 |\
-       qxwlan,e2600ac-c2)
+       qxwlan,e2600ac-c2 |\
+       unielec,u4019-32m)
+               caldata_extract "0:ART" 0x5000 0x2f20
+               ;;
+       devolo,magic-2-wifi-next)
+               caldata_extract "ART" 0x5000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress1)
+               ;;
+       dlink,dap-2610)
+               caldata_extract "ART" 0x5000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
+               ;;
+       engenius,emd1)
                caldata_extract "0:ART" 0x5000 0x2f20
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr) +1)
+               ;;
+       engenius,emr3500)
+               caldata_extract "0:ART" 0x5000 0x2f20
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) +1)
                ;;
        engenius,ens620ext)
                caldata_extract "ART" 0x5000 0x2f20
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)
                ;;
-       linksys,ea8300)
+       linksys,ea8300 |\
+       linksys,mr8300)
                caldata_extract "ART" 0x5000 0x2f20
                ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
                ;;
@@ -151,11 +253,21 @@ case "$FIRMWARE" in
                caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
                ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +3)
                ;;
+       mikrotik,hap-ac2|\
+       mikrotik,sxtsq-5-ac)
+               wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
+               ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x8000 0x2f20 ) || \
+               ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x0 0x2f20 )
+               ;;
        netgear,ex6100v2 |\
        netgear,ex6150v2)
                caldata_extract "ART" 0x5000 0x2f20
                ath10k_patch_mac $(mtd_get_mac_binary dnidata 0xc)
                ;;
+       netgear,wac510)
+               caldata_extract "0:ART" 0x5000 0x2f20
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:MANUDATA" 0x6) +16)
+               ;;
        zyxel,nbg6617 |\
        zyxel,wre6606)
                caldata_extract "ART" 0x5000 0x2f20
OpenWrt Source Repository