ipq40xx: add support for Qxwlan E2600AC C1 and C2

[openwrt/openwrt.git] / target / linux / ipq40xx / base-files / etc / hotplug.d / firmware / 11-ath10k-caldata

diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 8242fe0eb190d12034d3cefa90a11c05fa5a552b..44421527d2c161c2ae02e2c8f85a6c0dedcb2f9b 100644 (file)
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -31,7 +31,7 @@ ath10kcal_extract() {
        [ -n "$mtd" ] || \
                ath10kcal_die "no mtd device found for partition $part"
 
-       dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
+       dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
                ath10kcal_die "failed to extract calibration data from $mtd"
 }
 
@@ -49,7 +49,7 @@ ath10kcal_ubi_extract() {
        [ -n "$ubi" ] || \
                ath10kcal_die "no UBI volume found for $part"
 
-       dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
+       dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
                ath10kcal_die "failed to extract from $ubi"
 }
 
@@ -106,6 +106,11 @@ case "$FIRMWARE" in
        ;;
 "ath10k/pre-cal-pci-0000:01:00.0.bin")
        case "$board" in
+       asus,map-ac2200)
+               ath10kcal_ubi_extract "Factory" 36864 12064
+               ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+                       /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+               ;;
        openmesh,a62)
                ath10kcal_extract "0:ART" 36864 12064
                ;;
@@ -114,10 +119,15 @@ case "$FIRMWARE" in
 "ath10k/pre-cal-ahb-a000000.wifi.bin")
        case "$board" in
        8dev,jalapeno |\
+       alfa-network,ap120c-ac |\
        glinet,gl-b1300 |\
+       linksys,ea6350v3 |\
        qcom,ap-dk01.1-c1)
                ath10kcal_extract "ART" 4096 12064
                ;;
+       asus,map-ac2200)
+               ath10kcal_ubi_extract "Factory" 4096 12064
+               ;;
        asus,rt-ac58u)
                CI_UBIPART=UBI_DEV
                ath10kcal_ubi_extract "Factory" 4096 12064
@@ -125,6 +135,14 @@ case "$FIRMWARE" in
        avm,fritzbox-4040)
                /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
                ;;
+       compex,wpj428 |\
+       engenius,eap1300 |\
+       openmesh,a42 |\
+       openmesh,a62 |\
+       qxwlan,e2600ac-c1 |\
+       qxwlan,e2600ac-c2)
+               ath10kcal_extract "0:ART" 4096 12064
+               ;;
        meraki,mr33)
                ath10kcal_ubi_extract "ART" 4096 12064
                ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 4096 12064
@@ -135,12 +153,6 @@ case "$FIRMWARE" in
                ath10kcal_extract "ART" 4096 12064
                ath10kcal_patch_mac_crc $(mtd_get_mac_binary dnidata 0)
                ;;
-       compex,wpj428 |\
-       engenius,eap1300 |\
-       openmesh,a42 |\
-       openmesh,a62)
-               ath10kcal_extract "0:ART" 4096 12064
-               ;;
        zyxel,nbg6617 |\
        zyxel,wre6606)
                ath10kcal_extract "ART" 4096 12064
@@ -151,10 +163,15 @@ case "$FIRMWARE" in
 "ath10k/pre-cal-ahb-a800000.wifi.bin")
        case "$board" in
        8dev,jalapeno |\
+       alfa-network,ap120c-ac |\
        glinet,gl-b1300 |\
+       linksys,ea6350v3 |\
        qcom,ap-dk01.1-c1)
                ath10kcal_extract "ART" 20480 12064
                ;;
+       asus,map-ac2200)
+               ath10kcal_ubi_extract "Factory" 20480 12064
+               ;;
        asus,rt-ac58u)
                CI_UBIPART=UBI_DEV
                ath10kcal_ubi_extract "Factory" 20480 12064
@@ -162,6 +179,14 @@ case "$FIRMWARE" in
        avm,fritzbox-4040)
                /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
                ;;
+       compex,wpj428 |\
+       engenius,eap1300 |\
+       openmesh,a42 |\
+       openmesh,a62 |\
+       qxwlan,e2600ac-c1 |\
+       qxwlan,e2600ac-c2)
+               ath10kcal_extract "0:ART" 20480 12064
+               ;;
        meraki,mr33)
                ath10kcal_ubi_extract "ART" 20480 12064
                ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 20480 12064
@@ -172,12 +197,6 @@ case "$FIRMWARE" in
                ath10kcal_extract "ART" 20480 12064
                ath10kcal_patch_mac_crc $(mtd_get_mac_binary dnidata 12)
                ;;
-       compex,wpj428 |\
-       engenius,eap1300 |\
-       openmesh,a42 |\
-       openmesh,a62)
-               ath10kcal_extract "0:ART" 20480 12064
-               ;;
        zyxel,nbg6617 |\
        zyxel,wre6606)
                ath10kcal_extract "ART" 20480 12064