#!/bin/sh
-ath10kcal_die() {
- echo "ath10cal: " "$*"
- exit 1
-}
-
-ath10kcal_extract() {
- local part=$1
- local offset=$2
- local count=$3
- local mtd
-
- mtd=$(find_mtd_chardev $part)
- [ -n "$mtd" ] || \
- ath10kcal_die "no mtd device found for partition $part"
-
- dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
- ath10kcal_die "failed to extract calibration data from $mtd"
-}
-
[ -e /lib/firmware/$FIRMWARE ] && exit 0
-. /lib/functions.sh
-. /lib/functions/system.sh
+. /lib/functions/caldata.sh
board=$(board_name)
-
case "$FIRMWARE" in
+"ath10k/cal-pci-0000:01:00.0.bin")
+ case "$board" in
+ meraki,mr33 |\
+ meraki,mr74)
+ caldata_extract_ubi "ART" 0x9000 0x844
+ caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
+ ;;
+ esac
+ ;;
+"ath10k/pre-cal-pci-0000:01:00.0.bin")
+ case "$board" in
+ asus,map-ac2200)
+ caldata_extract_ubi "Factory" 0x9000 0x2f20
+ ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+ ;;
+ asus,rt-ac42u)
+ caldata_extract_ubi "Factory" 0x9000 0x2f20
+ ;;
+ avm,fritzrepeater-3000)
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
+ ;;
+ linksys,ea8300 |\
+ linksys,mr8300)
+ caldata_extract "ART" 0x9000 0x2f20
+ # OEM assigns 4 sequential MACs
+ ath10k_patch_mac $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
+ ;;
+ netgear,rbr50|\
+ netgear,rbs50|\
+ netgear,srr60|\
+ netgear,srs60)
+ caldata_extract_mmc "0:ART" 0x9000 0x2f20
+ ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x12)
+ ;;
+ esac
+ ;;
"ath10k/pre-cal-ahb-a000000.wifi.bin")
case "$board" in
+ qcom,ap-dk01.1-c1)
+ caldata_extract "ART" 0x1000 0x2f20
+ ;;
+ asus,map-ac2200|\
+ asus,rt-ac42u|\
+ asus,rt-ac58u)
+ caldata_extract_ubi "Factory" 0x1000 0x2f20
+ ;;
avm,fritzbox-4040)
/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
;;
- glinet,gl-b1300 |\
- qcom,ap-dk01.1-c1)
- ath10kcal_extract "ART" 4096 12064
+ avm,fritzbox-7530 |\
+ avm,fritzrepeater-1200 |\
+ avm,fritzrepeater-3000)
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
+ ;;
+ cellc,rtl30vw)
+ caldata_extract "0:ART" 0x1000 0x2f20
+ ;;
+ devolo,magic-2-wifi-next)
+ caldata_extract "ART" 0x1000 0x2f20
+ ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress0)
+ ;;
+ dlink,dap-2610)
+ caldata_extract "ART" 0x1000 0x2f20
+ ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac)
+ ;;
+ engenius,emd1)
+ caldata_extract "0:ART" 0x1000 0x2f20
+ ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr)
+ ;;
+ engenius,emr3500)
+ caldata_extract "0:ART" 0x1000 0x2f20
+ ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
+ ;;
+ engenius,ens620ext)
+ caldata_extract "ART" 0x1000 0x2f20
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 2)
+ ;;
+ extreme-networks,ws-ap3915i)
+ caldata_extract "ART" 0x1000 0x2f20
+ ath10k_patch_mac $(mtd_get_mac_ascii CFG1 RADIOADDR0)
+ ;;
+ linksys,ea8300 |\
+ linksys,mr8300)
+ caldata_extract "ART" 0x1000 0x2f20
+ ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
+ ;;
+ meraki,mr33 |\
+ meraki,mr74)
+ caldata_extract_ubi "ART" 0x1000 0x2f20
+ caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
;;
- openmesh,a42)
- ath10kcal_extract "0:ART" 4096 12064
+ mikrotik,cap-ac |\
+ mikrotik,hap-ac2 |\
+ mikrotik,hap-ac3 |\
+ mikrotik,hap-ac3-lte6-kit |\
+ mikrotik,wap-ac)
+ wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
+ ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x0 0x2f20 ) || \
+ ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x0 0x2f20 )
+ ;;
+ netgear,rbr50|\
+ netgear,rbs50|\
+ netgear,srr60|\
+ netgear,srs60)
+ caldata_extract_mmc "0:ART" 0x1000 0x2f20
+ ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x0)
+ ;;
+ pakedge,wr-1)
+ caldata_extract "0:ART" 0x1000 0x2f20
+ ath10k_patch_mac $(macaddr_add $(get_mac_label) 2)
+ ;;
+ teltonika,rutx10)
+ caldata_extract "0:ART" 0x1000 0x2f20
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 2)
+ ;;
+ sony,ncp-hg100-cellular)
+ caldata_extract_mmc "0:ART" 0x1000 0x2f20
+ ;;
+ zyxel,nbg6617 |\
+ zyxel,wre6606)
+ caldata_extract "ART" 0x1000 0x2f20
+ ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
;;
esac
;;
"ath10k/pre-cal-ahb-a800000.wifi.bin")
case "$board" in
+ qcom,ap-dk01.1-c1)
+ caldata_extract "ART" 0x5000 0x2f20
+ ;;
+ asus,map-ac2200|\
+ asus,rt-ac58u)
+ caldata_extract_ubi "Factory" 0x5000 0x2f20
+ ;;
avm,fritzbox-4040)
/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
;;
- glinet,gl-b1300 |\
- qcom,ap-dk01.1-c1)
- ath10kcal_extract "ART" 20480 12064
+ avm,fritzbox-7530 |\
+ avm,fritzrepeater-1200 |\
+ avm,fritzrepeater-3000)
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
+ ;;
+ cellc,rtl30vw)
+ caldata_extract "0:ART" 0x5000 0x2f20
+ ;;
+ devolo,magic-2-wifi-next)
+ caldata_extract "ART" 0x5000 0x2f20
+ ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress1)
+ ;;
+ dlink,dap-2610)
+ caldata_extract "ART" 0x5000 0x2f20
+ ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
+ ;;
+ engenius,emd1)
+ caldata_extract "0:ART" 0x5000 0x2f20
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr) 1)
+ ;;
+ engenius,emr3500)
+ caldata_extract "0:ART" 0x5000 0x2f20
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) 1)
+ ;;
+ engenius,ens620ext)
+ caldata_extract "ART" 0x5000 0x2f20
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 3)
+ ;;
+ extreme-networks,ws-ap3915i)
+ caldata_extract "ART" 0x5000 0x2f20
+ ath10k_patch_mac $(mtd_get_mac_ascii CFG1 RADIOADDR1)
;;
- openmesh,a42)
- ath10kcal_extract "0:ART" 20480 12064
+ linksys,ea8300 |\
+ linksys,mr8300)
+ caldata_extract "ART" 0x5000 0x2f20
+ ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
+ ;;
+ meraki,mr33 |\
+ meraki,mr74)
+ caldata_extract_ubi "ART" 0x5000 0x2f20
+ caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
+ ;;
+ mikrotik,cap-ac |\
+ mikrotik,hap-ac2 |\
+ mikrotik,hap-ac3 |\
+ mikrotik,hap-ac3-lte6-kit |\
+ mikrotik,sxtsq-5-ac |\
+ mikrotik,wap-ac)
+ wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
+ ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x8000 0x2f20 ) || \
+ ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x0 0x2f20 )
+ ;;
+ netgear,rbr50|\
+ netgear,rbs50|\
+ netgear,srr60|\
+ netgear,srs60)
+ caldata_extract_mmc "0:ART" 0x5000 0x2f20
+ ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0xc)
+ ;;
+ pakedge,wr-1)
+ caldata_extract "0:ART" 0x5000 0x2f20
+ ath10k_patch_mac $(macaddr_add $(get_mac_label) 4)
+ ;;
+ teltonika,rutx10)
+ caldata_extract "0:ART" 0x5000 0x2f20
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 3)
+ ;;
+ sony,ncp-hg100-cellular)
+ caldata_extract_mmc "0:ART" 0x5000 0x2f20
+ ;;
+ zyxel,nbg6617 |\
+ zyxel,wre6606)
+ caldata_extract "ART" 0x5000 0x2f20
+ ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
+ ;;
+ esac
+ ;;
+"ath10k/QCA4019/hw1.0/board-ahb-a000000.wifi.bin")
+ case "$board" in
+ mikrotik,cap-ac |\
+ mikrotik,hap-ac2 |\
+ mikrotik,hap-ac3 |\
+ mikrotik,hap-ac3-lte6-kit |\
+ mikrotik,wap-ac)
+ wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
+ ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x2f20 0x2f20 ) || \
+ ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x2f20 0x2f20 )
+ ;;
+ esac
+ ;;
+"ath10k/QCA4019/hw1.0/board-ahb-a800000.wifi.bin")
+ case "$board" in
+ mikrotik,cap-ac |\
+ mikrotik,hap-ac2 |\
+ mikrotik,hap-ac3 |\
+ mikrotik,hap-ac3-lte6-kit |\
+ mikrotik,sxtsq-5-ac |\
+ mikrotik,wap-ac)
+ wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
+ ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0xaf20 0x2f20 ) || \
+ ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x2f20 0x2f20 )
;;
esac
;;
projects / openwrt / openwrt.git / blobdiff