ipq40xx: ipq4019: Add new device Compex WPJ419

[openwrt/openwrt.git] / target / linux / ipq40xx / base-files / lib / upgrade / platform.sh

diff --git a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
index defa04d8801627324cdf0ebd253d47dd4f492f2a..96f865c67e3249834f01bab1953de8c588b73eb3 100644 (file)
--- a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
@@ -5,23 +5,95 @@ RAMFS_COPY_BIN='fw_printenv fw_setenv'
 RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
 
 platform_check_image() {
+       case "$(board_name)" in
+       asus,rt-ac58u)
+               CI_UBIPART="UBI_DEV"
+               local ubidev=$(nand_find_ubi $CI_UBIPART)
+               local asus_root=$(nand_find_volume $ubidev jffs2)
+
+               [ -n "$asus_root" ] || return 0
+
+               cat << EOF
+jffs2 partition is still present.
+There's probably no space left
+to install the filesystem.
+
+You need to delete the jffs2 partition first:
+# ubirmvol /dev/ubi0 --name=jffs2
+
+Once this is done. Retry.
+EOF
+               return 1
+               ;;
+       esac
        return 0;
 }
 
+zyxel_do_upgrade() {
+       local tar_file="$1"
+
+       local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
+       board_dir=${board_dir%/}
+
+       tar Oxf $tar_file ${board_dir}/kernel | mtd write - kernel
+
+       if [ -n "$UPGRADE_BACKUP" ]; then
+               tar Oxf $tar_file ${board_dir}/root | mtd -j "$UPGRADE_BACKUP" write - rootfs
+       else
+               tar Oxf $tar_file ${board_dir}/root | mtd write - rootfs
+       fi
+}
+
 platform_do_upgrade() {
        case "$(board_name)" in
-       openmesh,a42)
+       8dev,jalapeno |\
+       avm,fritzbox-7530 |\
+       avm,fritzrepeater-1200 |\
+       avm,fritzrepeater-3000 |\
+       qxwlan,e2600ac-c2)
+               nand_do_upgrade "$1"
+               ;;
+       alfa-network,ap120c-ac)
+               part="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | sed -e 's/ .*$//')"
+               if [ "$part" = "rootfs1" ]; then
+                       fw_setenv active 2 || exit 1
+                       CI_UBIPART="rootfs2"
+               else
+                       fw_setenv active 1 || exit 1
+                       CI_UBIPART="rootfs1"
+               fi
+               nand_do_upgrade "$1"
+               ;;
+       asus,map-ac2200)
+               CI_KERNPART="linux"
+               nand_do_upgrade "$1"
+               ;;
+       asus,rt-ac58u)
+               CI_UBIPART="UBI_DEV"
+               CI_KERNPART="linux"
+               nand_do_upgrade "$1"
+               ;;
+       compex,wpj419)
+               nand_do_upgrade "$1"
+               ;;
+       linksys,ea6350v3 |\
+       linksys,ea8300)
+               platform_do_upgrade_linksys "$1"
+               ;;
+       meraki,mr33)
+               CI_KERNPART="part.safe"
+               nand_do_upgrade "$1"
+               ;;
+       openmesh,a42 |\
+       openmesh,a62)
                PART_NAME="inactive"
-               platform_do_upgrade_openmesh "$ARGV"
+               platform_do_upgrade_openmesh "$1"
+               ;;
+       zyxel,nbg6617)
+               zyxel_do_upgrade "$1"
                ;;
        *)
-               default_do_upgrade "$ARGV"
+               default_do_upgrade "$1"
                ;;
        esac
 }
-
-blink_led() {
-       . /etc/diag.sh; set_state upgrade
-}
-
-append sysupgrade_pre_upgrade blink_led