RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
platform_check_image() {
+ case "$(board_name)" in
+ asus,rt-ac42u |\
+ asus,rt-ac58u)
+ local ubidev=$(nand_find_ubi $CI_UBIPART)
+ local asus_root=$(nand_find_volume $ubidev jffs2)
+
+ [ -n "$asus_root" ] || return 0
+
+ cat << EOF
+jffs2 partition is still present.
+There's probably no space left
+to install the filesystem.
+
+You need to delete the jffs2 partition first:
+# ubirmvol /dev/ubi0 --name=jffs2
+
+Once this is done. Retry.
+EOF
+ return 1
+ ;;
+ zte,mf286d)
+ CI_UBIPART="rootfs"
+ local mtdnum="$( find_mtd_index $CI_UBIPART )"
+ [ ! "$mtdnum" ] && return 1
+ ubiattach -m "$mtdnum" || true
+ local ubidev="$( nand_find_ubi $CI_UBIPART )"
+ local ubi_rootfs=$(nand_find_volume $ubidev ubi_rootfs)
+ local ubi_rootfs_data=$(nand_find_volume $ubidev ubi_rootfs_data)
+
+ [ -n "$ubi_rootfs" ] || [ -n "$ubi_rootfs_data" ] || return 0
+
+ cat << EOF
+ubi_rootfs partition is still present.
+
+You need to delete the stock partition first:
+# ubirmvol /dev/ubi0 -N ubi_rootfs
+Please also delete ubi_rootfs_data, if exist:
+# ubirmvol /dev/ubi0 -N ubi_rootfs_data
+
+Once this is done. Retry.
+EOF
+ return 1
+ ;;
+ esac
return 0;
}
+askey_do_upgrade() {
+ local tar_file="$1"
+
+ local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
+ board_dir=${board_dir%/}
+
+ tar Oxf $tar_file ${board_dir}/root | mtd write - rootfs
+
+ nand_do_upgrade "$1"
+}
+
+zyxel_do_upgrade() {
+ local tar_file="$1"
+
+ local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
+ board_dir=${board_dir%/}
+
+ tar Oxf $tar_file ${board_dir}/kernel | mtd write - kernel
+
+ if [ -n "$UPGRADE_BACKUP" ]; then
+ tar Oxf $tar_file ${board_dir}/root | mtd -j "$UPGRADE_BACKUP" write - rootfs
+ else
+ tar Oxf $tar_file ${board_dir}/root | mtd write - rootfs
+ fi
+}
+
+platform_do_upgrade_mikrotik_nand() {
+ local fw_mtd=$(find_mtd_part kernel)
+ fw_mtd="${fw_mtd/block/}"
+ [ -n "$fw_mtd" ] || return
+
+ local board_dir=$(tar tf "$1" | grep -m 1 '^sysupgrade-.*/$')
+ board_dir=${board_dir%/}
+ [ -n "$board_dir" ] || return
+
+ local kernel_len=$(tar xf "$1" ${board_dir}/kernel -O | wc -c)
+ [ -n "$kernel_len" ] || return
+
+ tar xf "$1" ${board_dir}/kernel -O | ubiformat "$fw_mtd" -y -S $kernel_len -f -
+
+ CI_KERNPART="none"
+ nand_do_upgrade "$1"
+}
+
platform_do_upgrade() {
case "$(board_name)" in
- openmesh,a42)
+ 8dev,jalapeno |\
+ aruba,ap-303 |\
+ aruba,ap-303h |\
+ aruba,ap-365 |\
+ avm,fritzbox-7530 |\
+ avm,fritzrepeater-1200 |\
+ avm,fritzrepeater-3000 |\
+ buffalo,wtr-m2133hp |\
+ cilab,meshpoint-one |\
+ edgecore,ecw5211 |\
+ edgecore,oap100 |\
+ engenius,eap2200 |\
+ glinet,gl-ap1300 |\
+ luma,wrtq-329acn |\
+ mobipromo,cm520-79f |\
+ netgear,wac510 |\
+ p2w,r619ac-64m |\
+ p2w,r619ac-128m |\
+ qxwlan,e2600ac-c2)
+ nand_do_upgrade "$1"
+ ;;
+ glinet,gl-b2200)
+ CI_KERNPART="0:HLOS"
+ CI_ROOTPART="rootfs"
+ CI_DATAPART="rootfs_data"
+ emmc_do_upgrade "$1"
+ ;;
+ alfa-network,ap120c-ac)
+ part="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | sed -e 's/ .*$//')"
+ if [ "$part" = "rootfs1" ]; then
+ fw_setenv active 2 || exit 1
+ CI_UBIPART="rootfs2"
+ else
+ fw_setenv active 1 || exit 1
+ CI_UBIPART="rootfs1"
+ fi
+ nand_do_upgrade "$1"
+ ;;
+ asus,map-ac2200)
+ CI_KERNPART="linux"
+ nand_do_upgrade "$1"
+ ;;
+ asus,rt-ac42u |\
+ asus,rt-ac58u)
+ CI_KERNPART="linux"
+ nand_do_upgrade "$1"
+ ;;
+ cellc,rtl30vw)
+ CI_UBIPART="ubifs"
+ askey_do_upgrade "$1"
+ ;;
+ compex,wpj419)
+ nand_do_upgrade "$1"
+ ;;
+ google,wifi)
+ export_bootdevice
+ export_partdevice CI_ROOTDEV 0
+ CI_KERNPART="kernel"
+ CI_ROOTPART="rootfs"
+ emmc_do_upgrade "$1"
+ ;;
+ linksys,ea6350v3 |\
+ linksys,ea8300 |\
+ linksys,mr8300)
+ platform_do_upgrade_linksys "$1"
+ ;;
+ meraki,mr33)
+ CI_KERNPART="part.safe"
+ nand_do_upgrade "$1"
+ ;;
+ mikrotik,cap-ac|\
+ mikrotik,hap-ac2|\
+ mikrotik,lhgg-60ad|\
+ mikrotik,sxtsq-5-ac)
+ [ "$(rootfs_type)" = "tmpfs" ] && mtd erase firmware
+ default_do_upgrade "$1"
+ ;;
+ mikrotik,hap-ac3)
+ platform_do_upgrade_mikrotik_nand "$1"
+ ;;
+ netgear,rbr50 |\
+ netgear,rbs50 |\
+ netgear,srr60 |\
+ netgear,srs60)
+ platform_do_upgrade_netgear_orbi_upgrade "$1"
+ ;;
+ openmesh,a42 |\
+ openmesh,a62 |\
+ plasmacloud,pa1200 |\
+ plasmacloud,pa2200)
PART_NAME="inactive"
- platform_do_upgrade_openmesh "$ARGV"
+ platform_do_upgrade_dualboot_datachk "$1"
+ ;;
+ teltonika,rutx10 |\
+ zte,mf286d)
+ CI_UBIPART="rootfs"
+ nand_do_upgrade "$1"
+ ;;
+ zyxel,nbg6617)
+ zyxel_do_upgrade "$1"
;;
*)
- default_do_upgrade "$ARGV"
+ default_do_upgrade "$1"
;;
esac
}
-blink_led() {
- . /etc/diag.sh; set_state upgrade
+platform_copy_config() {
+ case "$(board_name)" in
+ glinet,gl-b2200 |\
+ google,wifi)
+ emmc_copy_config
+ ;;
+ esac
+ return 0;
}
-
-append sysupgrade_pre_upgrade blink_led
projects / openwrt / openwrt.git / blobdiff