KERNEL_INITRAMFS_PREFIX := $$(IMG_PREFIX)-$(1)-initramfs
KERNEL_PREFIX := $$(IMAGE_PREFIX)
KERNEL_LOADADDR := 0x80208000
+ DEVICE_DTS = $$(SOC)-$(lastword $(subst _, ,$(1)))
SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
IMAGE/sysupgrade.bin/squashfs :=
endef
DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
+define Build/SenaoFW
+ -$(STAGING_DIR_HOST)/bin/mksenaofw \
+ -n $(BOARD_NAME) -r $(VENDOR_ID) -p $(1) \
+ -c $(DATECODE) -w $(2) -x $(CW_VER) -t 0 \
+ -e $@ \
+ -o $@.new
+ @cp $@.new $@
+endef
-define Device/8dev_jalapeno
+define Device/8dev_jalapeno-common
$(call Device/FitImage)
$(call Device/UbiFit)
- DEVICE_DTS := qcom-ipq4018-jalapeno
BLOCKSIZE := 128k
PAGESIZE := 2048
- DEVICE_TITLE := 8devices Jalapeno
+ SOC := qcom-ipq4018
+endef
+
+define Device/8dev_jalapeno
+ $(call Device/8dev_jalapeno-common)
+ DEVICE_VENDOR := 8devices
+ DEVICE_MODEL := Jalapeno
endef
TARGET_DEVICES += 8dev_jalapeno
define Device/alfa-network_ap120c-ac
$(call Device/FitImage)
$(call Device/UbiFit)
- DEVICE_TITLE := ALFA Network AP120C-AC
- DEVICE_DTS := qcom-ipq4018-ap120c-ac
- DEVICE_PACKAGES := ipq-wifi-alfa-network_ap120c-ac kmod-usb-acm \
+ DEVICE_VENDOR := ALFA Network
+ DEVICE_MODEL := AP120C-AC
+ SOC := qcom-ipq4018
+ DEVICE_PACKAGES := kmod-usb-acm \
kmod-tpm-i2c-atmel uboot-envtools
BLOCKSIZE := 128k
PAGESIZE := 2048
endef
TARGET_DEVICES += alfa-network_ap120c-ac
+define Device/aruba_ap-303
+ $(call Device/FitImageLzma)
+ DEVICE_VENDOR := Aruba
+ DEVICE_MODEL := AP-303
+ SOC := qcom-ipq4029
+ DEVICE_PACKAGES := ipq-wifi-aruba_ap-303
+ IMAGES := sysupgrade.bin
+endef
+TARGET_DEVICES += aruba_ap-303
+
define Device/asus_map-ac2200
$(call Device/FitImageLzma)
- DEVICE_DTS := qcom-ipq4019-map-ac2200
- DEVICE_TITLE := ASUS Lyra MAP-AC2200
+ DEVICE_VENDOR := ASUS
+ DEVICE_MODEL := Lyra (MAP-AC2200)
+ SOC := qcom-ipq4019
IMAGES := sysupgrade.bin
- DEVICE_PACKAGES := ipq-wifi-asus_map-ac2200 ath10k-firmware-qca9888-ct kmod-ath3k
+ DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-ath3k
endef
TARGET_DEVICES += asus_map-ac2200
define Device/asus_rt-ac58u
$(call Device/FitImageLzma)
- DEVICE_DTS := qcom-ipq4018-rt-ac58u
+ DEVICE_VENDOR := ASUS
+ DEVICE_MODEL := RT-AC58U
+ SOC := qcom-ipq4018
BLOCKSIZE := 128k
PAGESIZE := 2048
DTB_SIZE := 65536
- DEVICE_TITLE := Asus RT-AC58U
IMAGE_SIZE := 20439364
FILESYSTEMS := squashfs
# Someone - in their infinite wisdom - decided to put the firmware
# string and call it a day.... Yeah, we do the latter!
UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
IMAGES := sysupgrade.bin
- DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
+ DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
+ kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += asus_rt-ac58u
define Device/avm_fritzbox-4040
$(call Device/FitImageLzma)
- DEVICE_DTS := qcom-ipq4018-fritz4040
+ DEVICE_VENDOR := AVM
+ DEVICE_MODEL := FRITZ!Box 4040
+ SOC := qcom-ipq4018
BOARD_NAME := fritz4040
- DEVICE_TITLE := AVM Fritz!Box 4040
- IMAGE_SIZE := 29753344
+ IMAGE_SIZE := 29056k
UBOOT_PATH := $(STAGING_DIR_IMAGE)/uboot-fritz4040.bin
UBOOT_PARTITION_SIZE := 524288
IMAGES = eva.bin sysupgrade.bin
define Device/avm_fritzbox-7530
$(call Device/FitImageLzma)
- DEVICE_DTS := qcom-ipq4019-fritzbox-7530
- DEVICE_TITLE := AVM Fritz!Box 7530
- DEVICE_PACKAGES := fritz-caldata ipq-wifi-avm_fritzbox-7530
+ DEVICE_VENDOR := AVM
+ DEVICE_MODEL := FRITZ!Box 7530
+ SOC := qcom-ipq4019
+ DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
IMAGES := sysupgrade.bin
endef
TARGET_DEVICES += avm_fritzbox-7530
+define Device/avm_fritzrepeater-1200
+ $(call Device/FitImageLzma)
+ DEVICE_VENDOR := AVM
+ DEVICE_MODEL := FRITZ!Repeater 1200
+ SOC := qcom-ipq4019
+ DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzrepeater-1200
+ IMAGES := sysupgrade.bin
+endef
+TARGET_DEVICES += avm_fritzrepeater-1200
+
+define Device/avm_fritzrepeater-3000
+ $(call Device/FitImageLzma)
+ DEVICE_VENDOR := AVM
+ DEVICE_MODEL := FRITZ!Repeater 3000
+ SOC := qcom-ipq4019
+ DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
+ IMAGES := sysupgrade.bin
+endef
+TARGET_DEVICES += avm_fritzrepeater-3000
+
+define Device/cilab_meshpoint-one
+ $(call Device/8dev_jalapeno-common)
+ DEVICE_VENDOR := Crisis Innovation Lab
+ DEVICE_MODEL := MeshPoint.One
+ DEVICE_PACKAGES := kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
+endef
+TARGET_DEVICES += cilab_meshpoint-one
+
+define Device/compex_wpj419
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_VENDOR := Compex
+ DEVICE_MODEL := WPJ419
+ SOC := qcom-ipq4019
+ DEVICE_DTS_CONFIG := config@12
+ KERNEL_INSTALL := 1
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ FILESYSTEMS := squashfs
+endef
+TARGET_DEVICES += compex_wpj419
+
define Device/compex_wpj428
$(call Device/FitImage)
- DEVICE_DTS := qcom-ipq4028-wpj428
+ DEVICE_VENDOR := Compex
+ DEVICE_MODEL := WPJ428
+ SOC := qcom-ipq4028
DEVICE_DTS_CONFIG := config@4
BLOCKSIZE := 64k
- DEVICE_TITLE := Compex WPJ428
IMAGE_SIZE := 31232k
KERNEL_SIZE := 4096k
IMAGES = sysupgrade.bin
define Device/engenius_eap1300
$(call Device/FitImage)
- DEVICE_TITLE := EnGenius EAP1300
+ DEVICE_VENDOR := EnGenius
+ DEVICE_MODEL := EAP1300
DEVICE_DTS_CONFIG := config@4
BOARD_NAME := eap1300
- DEVICE_DTS := qcom-ipq4018-eap1300
+ SOC := qcom-ipq4018
KERNEL_SIZE := 5120k
IMAGE_SIZE := 25344k
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
- DEVICE_PACKAGES := ipq-wifi-engenius_eap1300
endef
TARGET_DEVICES += engenius_eap1300
+define Device/engenius_ens620ext
+ $(call Device/FitImage)
+ DEVICE_VENDOR := EnGenius
+ DEVICE_MODEL := ENS620EXT
+ SOC := qcom-ipq4018
+ DEVICE_DTS_CONFIG := config@4
+ BLOCKSIZE := 64k
+ PAGESIZE := 256
+ BOARD_NAME := ENS620EXT
+ VENDOR_ID := 0x0101
+ PRODUCT_ID := 0x79
+ PRODUCT_ID_NEW := 0xA4
+ DATECODE := 190507
+ FW_VER := 3.1.2
+ FW_VER_NEW := 3.5.6
+ CW_VER := 1.8.99
+ IMAGE_SIZE := 21312k
+ KERNEL_SIZE := 5120k
+ FILESYSTEMS := squashfs
+ IMAGES := sysupgrade.bin factory_30.bin factory_35.bin
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | append-metadata
+ IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER)
+ IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size $$$$(IMAGE_SIZE) | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW)
+endef
+TARGET_DEVICES += engenius_ens620ext
+
+define Device/ezviz_cs-w3-wd1200g-eup
+ $(call Device/FitImage)
+ DEVICE_VENDOR := EZVIZ
+ DEVICE_MODEL := CS-W3-WD1200G
+ DEVICE_VARIANT := EUP
+ DEVICE_DTS_CONFIG := config@4
+ IMAGE_SIZE := 14848k
+ SOC := qcom-ipq4018
+ IMAGES := sysupgrade.bin
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
+ append-metadata
+ DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
+ ipq-wifi-ezviz_cs-w3-wd1200g-eup
+endef
+TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
+
define Device/glinet_gl-b1300
$(call Device/FitImage)
- DEVICE_TITLE := GL.iNet GL-B1300
+ DEVICE_VENDOR := GL.iNet
+ DEVICE_MODEL := GL-B1300
BOARD_NAME := gl-b1300
- DEVICE_DTS := qcom-ipq4029-gl-b1300
+ SOC := qcom-ipq4029
KERNEL_SIZE := 4096k
IMAGE_SIZE := 26624k
IMAGES := sysupgrade.bin
# 4. The kernel command line from uboot is harcoded to boot with
# rootfs either in mtd11 or mtd13.
$(call Device/FitzImage)
- DEVICE_TITLE := Linksys EA6350v3
- DEVICE_DTS := qcom-ipq4018-ea6350v3
+ DEVICE_VENDOR := Linksys
+ DEVICE_MODEL := EA6350
+ DEVICE_VARIANT := v3
+ SOC := qcom-ipq4018
BLOCKSIZE := 128k
PAGESIZE := 2048
- KERNEL_SIZE := 3145728
- IMAGE_SIZE := 38797312
+ KERNEL_SIZE := 3072k
+ IMAGE_SIZE := 37888k
UBINIZE_OPTS := -E 5
IMAGES := factory.bin sysupgrade.bin
IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$${KERNEL_SIZE} | append-ubi | linksys-image type=EA6350v3
- DEVICE_PACKAGES := ipq-wifi-linksys_ea6350v3 uboot-envtools
+ DEVICE_PACKAGES := uboot-envtools
endef
TARGET_DEVICES += linksys_ea6350v3
+define Device/linksys_ea8300
+ $(call Device/FitzImage)
+ DEVICE_VENDOR := Linksys
+ DEVICE_MODEL := EA8300
+ SOC := qcom-ipq4019
+ KERNEL_SIZE := 3072k
+ IMAGE_SIZE := 87040k
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/factory.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-ubi | linksys-image type=EA8300
+ DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += linksys_ea8300
+
define Device/meraki_mr33
$(call Device/FitImage)
- DEVICE_DTS := qcom-ipq4029-mr33
- BLOCKSIZE := 131072
+ DEVICE_VENDOR := Cisco Meraki
+ DEVICE_MODEL := MR33
+ SOC := qcom-ipq4029
+ BLOCKSIZE := 128k
PAGESIZE := 2048
- DEVICE_TITLE := Cisco Meraki MR33
IMAGES = sysupgrade.bin
DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
endef
DEVICE_DTS_CONFIG := config@4
NETGEAR_BOARD_ID := EX6150v2series
NETGEAR_HW_ID := 29765285+16+0+128+2x2
+ SOC := qcom-ipq4018
endef
define Device/netgear_ex6100v2
$(call Device/netgear_ex61x0v2)
- DEVICE_DTS := qcom-ipq4018-ex6100v2
- DEVICE_TITLE := Netgear EX6100v2
+ DEVICE_VENDOR := Netgear
+ DEVICE_MODEL := EX6100
+ DEVICE_VARIANT := v2
endef
TARGET_DEVICES += netgear_ex6100v2
define Device/netgear_ex6150v2
$(call Device/netgear_ex61x0v2)
- DEVICE_DTS := qcom-ipq4018-ex6150v2
- DEVICE_TITLE := Netgear EX6150v2
+ DEVICE_VENDOR := Netgear
+ DEVICE_MODEL := EX6150
+ DEVICE_VARIANT := v2
endef
TARGET_DEVICES += netgear_ex6150v2
define Device/openmesh_a42
$(call Device/FitImageLzma)
- DEVICE_DTS := qcom-ipq4018-a42
+ DEVICE_VENDOR := OpenMesh
+ DEVICE_MODEL := A42
+ SOC := qcom-ipq4018
DEVICE_DTS_CONFIG := config@om.a42
BLOCKSIZE := 64k
- DEVICE_TITLE := OpenMesh A42
KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
IMAGE_SIZE := 15616k
IMAGES = factory.bin sysupgrade.bin
define Device/openmesh_a62
$(call Device/FitImageLzma)
- DEVICE_DTS := qcom-ipq4019-a62
+ DEVICE_VENDOR := OpenMesh
+ DEVICE_MODEL := A62
+ SOC := qcom-ipq4019
DEVICE_DTS_CONFIG := config@om.a62
BLOCKSIZE := 64k
- DEVICE_TITLE := OpenMesh A62
KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
IMAGE_SIZE := 15552k
IMAGES = factory.bin sysupgrade.bin
TARGET_DEVICES += openmesh_a62
define Device/qcom_ap-dk01.1-c1
- DEVICE_TITLE := QCA AP-DK01.1-C1
+ DEVICE_VENDOR := Qualcomm Atheros
+ DEVICE_MODEL := AP-DK01.1
+ DEVICE_VARIANT := C1
BOARD_NAME := ap-dk01.1-c1
+ SOC := qcom-ipq4019
DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
KERNEL_INSTALL := 1
KERNEL_SIZE := 4096k
define Device/qcom_ap-dk04.1-c1
$(call Device/FitImage)
$(call Device/UbiFit)
+ DEVICE_VENDOR := Qualcomm Atheros
+ DEVICE_MODEL := AP-DK04.1
+ DEVICE_VARIANT := C1
+ SOC := qcom-ipq4019
DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
KERNEL_INSTALL := 1
KERNEL_SIZE := 4048k
BLOCKSIZE := 128k
PAGESIZE := 2048
BOARD_NAME := ap-dk04.1-c1
- DEVICE_TITLE := QCA AP-DK04.1-C1
endef
TARGET_DEVICES += qcom_ap-dk04.1-c1
define Device/qxwlan_e2600ac-c1
$(call Device/FitImage)
- DEVICE_TITLE := Qxwlan E2600AC-C1 (nor flash)
+ DEVICE_VENDOR := Qxwlan
+ DEVICE_MODEL := E2600AC
+ DEVICE_VARIANT := C1
BOARD_NAME := e2600ac-c1
- DEVICE_DTS := qcom-ipq4019-qxwlan-e2600ac-c1
+ SOC := qcom-ipq4019
KERNEL_SIZE := 4096k
IMAGE_SIZE := 31232k
IMAGES := sysupgrade.bin
define Device/qxwlan_e2600ac-c2
$(call Device/FitImage)
$(call Device/UbiFit)
- DEVICE_DTS := qcom-ipq4019-qxwlan-e2600ac-c2
+ DEVICE_VENDOR := Qxwlan
+ DEVICE_MODEL := E2600AC
+ DEVICE_VARIANT := C2
+ SOC := qcom-ipq4019
KERNEL_INSTALL := 1
BLOCKSIZE := 128k
PAGESIZE := 2048
- DEVICE_TITLE := Qxwlan E2600AC-C2 (nornand flash)
DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
endef
TARGET_DEVICES += qxwlan_e2600ac-c2
+define Device/unielec_u4019-32m
+ $(call Device/FitImage)
+ DEVICE_VENDOR := Unielec
+ DEVICE_MODEL := U4019
+ DEVICE_VARIANT := 32M
+ BOARD_NAME := u4019-32m
+ SOC := qcom-ipq4019
+ KERNEL_SIZE := 4096k
+ IMAGE_SIZE := 31232k
+ IMAGES := sysupgrade.bin
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+endef
+TARGET_DEVICES += unielec_u4019-32m
+
define Device/zyxel_nbg6617
$(call Device/FitImageLzma)
- DEVICE_DTS := qcom-ipq4018-nbg6617
- DEVICE_TITLE := ZyXEL NBG6617
+ DEVICE_VENDOR := ZyXEL
+ DEVICE_MODEL := NBG6617
+ SOC := qcom-ipq4018
ROOTFS_SIZE := 24960k
RAS_BOARD := NBG6617
RAS_ROOTFS_SIZE := 19840k
define Device/zyxel_wre6606
$(call Device/FitImage)
- DEVICE_TITLE := ZyXEL WRE6606
+ DEVICE_VENDOR := ZyXEL
+ DEVICE_MODEL := WRE6606
DEVICE_DTS_CONFIG := config@4
- DEVICE_DTS := qcom-ipq4018-wre6606
+ SOC := qcom-ipq4018
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+ DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
endef
TARGET_DEVICES += zyxel_wre6606
projects / openwrt / openwrt.git / blobdiff