ipq806x: add support for TP-Link Talon AD7200

[openwrt/openwrt.git] / target / linux / ipq806x / base-files / etc / hotplug.d / firmware / 11-ath10k-caldata

diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 4aaa92305ba6964180101846fef5d3aa1aa4d312..3befc40630c988d7f84c940bf4cff4d0b2c4cfc4 100644 (file)
--- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -1,114 +1,99 @@
 #!/bin/sh
 
-ath10kcal_die() {
-       echo "ath10cal: " "$*"
-       exit 1
-}
-
-ath10kcal_from_file() {
-       local source=$1
-       local offset=$2
-       local count=$3
-
-       dd if=$source of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
-               ath10kcal_die "failed to extract calibration data from $source"
-}
-
-ath10kcal_extract() {
-       local part=$1
-       local offset=$2
-       local count=$3
-       local mtd
-
-       mtd=$(find_mtd_chardev $part)
-       [ -n "$mtd" ] || \
-               ath10kcal_die "no mtd device found for partition $part"
-
-       dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
-               ath10kcal_die "failed to extract calibration data from $mtd"
-}
-
-ath10kcal_patch_mac() {
-       local mac=$1
-
-       [ -z "$mac" ] && return
-
-       macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=6 count=6
-}
-
 [ -e /lib/firmware/$FIRMWARE ] && exit 0
 
-. /lib/functions.sh
-. /lib/functions/system.sh
+. /lib/functions/caldata.sh
 
 board=$(board_name)
 
-
 case "$FIRMWARE" in
-"ath10k/pre-cal-ahb-a000000.wifi.bin")
-       case "$board" in
-       avm,fritzbox-4040)
-               /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
+"ath10k/pre-cal-pci-0000:01:00.0.bin")
+       case $board in
+       asrock,g10)
+               caldata_extract "0:ART" 0x1000 0x2f20
                ;;
-       qcom,ap-dk01.1-c1)
-               ath10kcal_extract "ART" 4096 12064
+       buffalo,wxr-2533dhp)
+               caldata_extract "ART" 0x1000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_binary ART 0x1e)
                ;;
-       esac
-       ;;
-"ath10k/pre-cal-ahb-a800000.wifi.bin")
-       case "$board" in
-       avm,fritzbox-4040)
-               /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
+       edgecore,ecw5410)
+               caldata_extract "0:ART" 0x1000 0x2f20
                ;;
-       qcom,ap-dk01.1-c1)
-               ath10kcal_extract "ART" 20480 12064
-               ;;
-       esac
-       ;;
-
-"ath10k/pre-cal-pci-0000:01:00.0.bin")
-       case $board in
+       linksys,ea7500-v1 |\
        linksys,ea8500)
-               hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
-               ath10kcal_extract "art" 4096 12064
+               caldata_extract "art" 0x1000 0x2f20
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) +1)
+               ;;
+       nec,wg2600hp |\
+       nec,wg2600hp3)
+               caldata_extract "ART" 0x1000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_binary PRODUCTDATA 0x12)
                ;;
        netgear,d7800 |\
        netgear,r7500v2 |\
        netgear,r7800)
-               ath10kcal_extract "art" 4096 12064
+               caldata_extract "art" 0x1000 0x2f20
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x6) +1)
                ;;
+       tplink,ad7200 |\
        tplink,c2600)
-               ath10kcal_extract "radio" 4096 12064
-#              ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -1)
+               caldata_extract "radio" 0x1000 0x2f20
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 0x8) -1)
                ;;
        tplink,vr2600v)
-               ath10kcal_extract "ART" 4096 12064
+               caldata_extract "ART" 0x1000 0x2f20
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 0x0) -1)
                ;;
        zyxel,nbg6817)
-               ath10kcal_extract "0:ART" 4096 12064
+               caldata_extract "0:ART" 0x1000 0x2f20
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) +1)
                ;;
        esac
        ;;
 "ath10k/pre-cal-pci-0001:01:00.0.bin")
        case $board in
+       asrock,g10)
+               caldata_extract "0:ART" 0x5000 0x2f20
+               ;;
+       buffalo,wxr-2533dhp)
+               caldata_extract "ART" 0x5000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_binary ART 0x18)
+               ;;
+       linksys,ea7500-v1 |\
        linksys,ea8500)
-               hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
-               ath10kcal_extract "art" 20480 12064
+               caldata_extract "art" 0x5000 0x2f20
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) +2)
+               ;;
+       nec,wg2600hp |\
+       nec,wg2600hp3)
+               caldata_extract "ART" 0x5000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_binary PRODUCTDATA 0xc)
                ;;
        netgear,d7800 |\
        netgear,r7500v2 |\
        netgear,r7800)
-               ath10kcal_extract "art" 20480 12064
+               caldata_extract "art" 0x5000 0x2f20
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x6) +2)
                ;;
+       tplink,ad7200 |\
        tplink,c2600)
-               ath10kcal_extract "radio" 20480 12064
-#              ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -2)
+               caldata_extract "radio" 0x5000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_binary default-mac 0x8)
                ;;
        tplink,vr2600v)
-               ath10kcal_extract "ART" 20480 12064
+               caldata_extract "ART" 0x5000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_binary default-mac 0x0)
                ;;
        zyxel,nbg6817)
-               ath10kcal_extract "0:ART" 20480 12064
+               caldata_extract "0:ART" 0x5000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
+               ;;
+       esac
+       ;;
+"ath10k/pre-cal-pci-0002:01:00.0.bin")
+       case $board in
+       edgecore,ecw5410)
+               caldata_extract "0:ART" 0x5000 0x2f20
                ;;
        esac
        ;;