qcom,saw = <&saw0>;
clocks = <&kraitcc 0>, <&kraitcc 4>;
clock-names = "cpu", "l2";
- qcom,imem = <&imem>;
+ qcom,imem = <&qfprom>;
clock-latency = <100000>;
cpu-supply = <&smb208_s2a>;
voltage-tolerance = <5>;
qcom,saw = <&saw1>;
clocks = <&kraitcc 1>, <&kraitcc 4>;
clock-names = "cpu", "l2";
- qcom,imem = <&imem>;
+ qcom,imem = <&qfprom>;
clock-latency = <100000>;
cpu-supply = <&smb208_s2b>;
cooling-min-state = <0>;
};
};
+ thermal-zones {
+ cpu-thermal0 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&gcc 5>;
+ coefficients = <1132 0>;
+
+ trips {
+ cpu_alert0: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit0: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal1 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&gcc 6>;
+ coefficients = <1132 0>;
+
+ trips {
+ cpu_alert1: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit1: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal2 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&gcc 7>;
+ coefficients = <1199 0>;
+
+ trips {
+ cpu_alert2: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit2: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal3 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&gcc 8>;
+ coefficients = <1132 0>;
+
+ trips {
+ cpu_alert3: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit3: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
cpu-pmu {
compatible = "qcom,krait-pmu";
interrupts = <1 10 0x304>;
< 600000000 1000000 >,
< 384000000 975000 >;
qcom,speed0-pvs1-bin-v0 =
- < 1725000000 1262500 >,
- < 1400000000 1175000 >,
- < 1000000000 1100000 >,
- < 800000000 1050000 >,
- < 600000000 1000000 >,
+ < 1725000000 1225000 >,
+ < 1400000000 1150000 >,
+ < 1000000000 1075000 >,
+ < 800000000 1025000 >,
+ < 600000000 975000 >,
< 384000000 950000 >;
qcom,speed0-pvs2-bin-v0 =
< 1725000000 1200000 >,
reg-names = "lpass-lpaif";
};
- imem: memory@700000 {
+ qfprom: qfprom@700000 {
compatible = "qcom,qfprom", "syscon";
reg = <0x00700000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
- stride = <1>;
- ranges = <0x0 0x00700000 0x1000>;
+ ranges;
+
+ tsens_calib: calib {
+ reg = <0x400 0x10>;
+ };
+ tsens_backup: backup_calib {
+ reg = <0x410 0x10>;
+ };
};
rpm@108000 {
};
smb208_s2a: s2a {
- regulator-min-microvolt = < 800000>;
+ regulator-min-microvolt = <775000>;
regulator-max-microvolt = <1275000>;
qcom,switch-mode-frequency = <1200000>;
};
smb208_s2b: s2b {
- regulator-min-microvolt = < 800000>;
+ regulator-min-microvolt = <775000>;
regulator-max-microvolt = <1275000>;
qcom,switch-mode-frequency = <1200000>;
};
gcc: clock-controller@900000 {
compatible = "qcom,gcc-ipq8064";
reg = <0x00900000 0x4000>;
+ nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+ nvmem-cell-names = "calib", "calib_backup";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
+ #thermal-sensor-cells = <1>;
};
lcc: clock-controller@28000000 {
reg = <0x1a400000 0x100>;
};
- tsens: tsens-ipq806x {
- compatible = "qcom,ipq806x-tsens";
- reg = <0x900000 0x3678>, <0x700000 0x420>;
- reg-names = "tsens_physical", "tsens_eeprom_physical";
- interrupts = <0 178 0>;
- qcom,sensors = <11>;
- qcom,tsens_factor = <1000>;
- qcom,slope = <1176 1176 1154 1176 1111 1132 1132 1199 1132 1199 1132>;
- };
-
qcom,msm-thermal {
compatible = "qcom,msm-thermal";
qcom,sensor-id = <0>;
interrupts = <0 110 0x4>;
phys = <&hs_phy_0>, <&ss_phy_0>;
phy-names = "usb2-phy", "usb3-phy";
- tx-fifo-resize;
dr_mode = "host";
};
};
interrupts = <0 205 0x4>;
phys = <&hs_phy_1>, <&ss_phy_1>;
phy-names = "usb2-phy", "usb3-phy";
- tx-fifo-resize;
dr_mode = "host";
};
};