lantiq: fix WBMR-300HPD switch port assignment

[openwrt/openwrt.git] / target / linux / lantiq / base-files / etc / board.d / 02_network

diff --git a/target/linux/lantiq/base-files/etc/board.d/02_network b/target/linux/lantiq/base-files/etc/board.d/02_network
index 89ffc79b0f68e34ce18694e76203d1d080e98b08..d6f66016f64f7295ac90280758d5823b1275092b 100755 (executable)
--- a/target/linux/lantiq/base-files/etc/board.d/02_network
+++ b/target/linux/lantiq/base-files/etc/board.d/02_network
@@ -45,6 +45,14 @@ ARV4519PW|ARV7510PW22|ARV7518PW|ARV752DPW22|ARV8539PW22)
                "0t@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4"
        ;;
 
+# rtl8306g
+ARV7506PW11)
+       lan_mac=$(mtd_get_mac_binary board_config 22)
+       wan_mac=$(macaddr_add "$lan_mac" 2)
+       ucidef_add_switch "switch0" \
+               "4:lan:1" "3:lan:2" "2:lan:3" "1:lan:4" "5t@eth0"
+       ;;
+
 # rtl8306g
 ARV7519PW)
        lan_mac=$(mtd_get_mac_binary board_config 22)
@@ -67,17 +75,13 @@ ARV4518PWR01*)
         ;;
 
 DGN3500*)
-       eth0_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
-       nas0_mac=$(macaddr_add "$eth0_mac" 1)
-       ifconfig eth0 hw ether "$eth0_mac"
-       ifconfig wlan0 hw ether "$eth0_mac"
-       esi $(echo "$nas0_mac" | tr -d :)
        ucidef_add_switch "switch0" \
                "3:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "5t@eth0"
        ;;
 
-GR7000)
-       ucidef_set_interface_wan "eth0"
+FRITZ7360SL)
+       ucidef_add_switch "switch0" \
+               "4:lan:1" "2:lan:2" "0:lan:3" "1:lan:4" "6t@eth0"
        ;;
 
 H201L)
@@ -150,7 +154,11 @@ WBMR300)
        lan_mac=$(mtd_get_mac_ascii ubootconfig ethaddr)
        wan_mac="$lan_mac"
        ucidef_add_switch "switch0" \
-               "2:lan:1" "3:lan:2" "5:lan:3" "4:wan:1" "6t@eth0"
+               "2:lan:2" "3:lan:3" "5:lan:4" "4:wan:1" "6t@eth0"
+       ;;
+
+*)
+       ucidef_set_interface_lan 'eth0'
        ;;
 
 esac