lantiq: add missing default lan interface

[openwrt/openwrt.git] / target / linux / lantiq / base-files / etc / board.d / 02_network

diff --git a/target/linux/lantiq/base-files/etc/board.d/02_network b/target/linux/lantiq/base-files/etc/board.d/02_network
index c2a1fbe680a937e2441110bba4fcb3f9db9743b3..de55be8efbd70e121b712c0e658153644fd9d297 100755 (executable)
--- a/target/linux/lantiq/base-files/etc/board.d/02_network
+++ b/target/linux/lantiq/base-files/etc/board.d/02_network
@@ -58,7 +58,7 @@ ARV7519PW)
 ARV7519RW22)
        wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 22)" 1)
        ucidef_add_switch "switch0" \
-               "0:lan" "2:lan" "3:lan" "4:lan" "5:lan" "6t@eth0"
+               "0:lan:5" "2:lan:3" "3:lan:4" "4:lan:1" "5:lan:2" "6t@eth0"
        ;;
 
 BTHOMEHUBV2B)
@@ -78,7 +78,7 @@ BTHOMEHUBV5A)
        lan_mac=$(mtd_get_mac_binary_ubi caldata 4364)
        wan_mac=$(macaddr_add "$lan_mac" 1)
        ucidef_add_switch "switch0" \
-               "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
+               "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
        ;;
 
 DGN3500*)
@@ -93,7 +93,18 @@ EASY80920NAND|EASY80920NOR)
                "0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
        ;;
 
+FRITZ3370)
+       wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2439)" 1)
+       ucidef_set_interface_lan 'eth0'
+       ;;
+
+FRITZ7320)
+       wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
+       ucidef_set_interface_lan 'eth0'
+       ;;
+
 FRITZ7360SL)
+       wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
        ucidef_add_switch "switch0" \
                "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
        ;;
@@ -112,7 +123,7 @@ P2812HNUF*)
        lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
        wan_mac=$(macaddr_add "$lan_mac" 1)
        ucidef_add_switch "switch0" \
-               "0:lan" "1:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
+               "0:lan" "1:lan" "2:lan" "4:lan" "5:wan" "6t@eth0"
        ;;
 
 TDW8970|TDW8980)
@@ -134,16 +145,16 @@ VR200v)
                "0:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
        ;;
 
-VGV7510KW22)
+VGV7510KW22*)
        wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
        ucidef_add_switch "switch0" \
-               "2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "6t@eth0"
+               "2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "0:wan:5" "6t@eth0"
        ;;
 
-VGV7519)
+VGV7519*)
        wan_mac=$(mtd_get_mac_binary board_config 22)
        ucidef_add_switch "switch0" \
-               "0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "6t@eth0"
+               "0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
        ;;
 
 WBMR)
@@ -168,7 +179,7 @@ if [ -n "$(ls /lib/modules/`uname -r`/ltq_atm*)" ]; then
        ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload"
 fi
 
-if grep -qE "system type.*: (VR9|xRX200)" /proc/cpuinfo; then
+if lantiq_is_vdsl_system; then
        interface_wan="ptm0"
        ucidef_add_vdsl_modem "$annex" "av" "ptm"
 else