lantiq: Add support for the BT Home Hub 5A

[openwrt/openwrt.git] / target / linux / lantiq / base-files / etc / uci-defaults / 01_leds

diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/01_leds b/target/linux/lantiq/base-files/etc/uci-defaults/01_leds
old mode 100755 (executable)
new mode 100644 (file)
index bdf1311..3e05eba
--- a/target/linux/lantiq/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/lantiq/base-files/etc/uci-defaults/01_leds
@@ -9,27 +9,57 @@
 
 [ -e "/sys/class/leds/wifi" ] && ucidef_set_led_wlan "wifi" "wifi" "wifi" "phy0tpt"
 [ -e "/sys/class/leds/usb" ] && ucidef_set_led_usbdev "usb" "usb" "usb" "1-1"
-[ -e "/sys/class/leds/dsl" ] &&        ucidef_set_led_netdev "dsl" "dsl" "dsl" "pppoe-wan"
+[ -e "/sys/class/leds/usb2" ] && ucidef_set_led_usbdev "usb2" "usb2" "usb2" "2-1"
+[ -e "/sys/class/leds/internet" ] && ucidef_set_led_netdev "internet" "internet" "internet" "pppoe-wan"
 
-for a in `ls /sys/class/leds/`; do
-       grep -q "\[none\]" /sys/class/leds/$a/trigger
-       [ $? -eq 0 ] && ucidef_set_led_default $a $a $a `cat /sys/class/leds/$a/brightness`
-done
-
-board=$(lantiq_board_id)
+board=$(lantiq_board_name)
 
 case "$board" in
 VG3503J)
-       ucidef_set_led_netdev "lan1" "lan1" "bt:green:lan1" "eth0"
-       ucidef_set_led_netdev "lan2" "lan2" "bt:green:lan2" "eth1"
-       ucidef_set_led_netdev "port1" "port1" "bt:green:port1" "eth0"
-       ucidef_set_led_netdev "port2" "port2" "bt:green:port2" "eth1"
        ucidef_set_led_netdev "vdsl" "vdsl" "bt:green:dsl" "ptm0"
        ;;
+BTHOMEHUBV2B)
+       ucidef_set_led_default "power" "power" "soc:blue:power" "1"
+#      ucidef_set_led_wlan "wifi" "wifi" "soc:blue:wireless" "phy0radio"
+       ucidef_set_led_wlan "wifi" "wifi" "soc:blue:wireless" "phy0tpt"
+       ucidef_set_led_netdev "internet" "internet" "soc:blue:broadband" "pppoa-wan"
+       ucidef_set_led_usbdev "usb" "usb" "soc:blue:phone" "1-1"
+       ;;
+BTHOMEHUBV3A|BTHOMEHUBV5A)
+       ucidef_set_led_default "power" "power" "soc:blue:power" "1"
+       ucidef_set_led_wlan "wifi" "wifi" "soc:blue:wireless" "phy0tpt"
+       ucidef_set_led_netdev "internet" "internet" "soc:blue:broadband" "pppoa-wan"
+       ;;
+VGV7510KW22)
+       ucidef_set_led_default "power" "power" "power" "1"
+       ucidef_set_led_default "power2" "power2" "power2" "0"
+       ucidef_set_led_wlan "wifi" "wifi" "wifi" "phy0radio"
+       ucidef_set_led_netdev "dsl" "dsl" "dsl" "nas0"
+       ucidef_set_led_netdev "internet_green" "internet_green" "internet_green" "pppoe-wan"
+       ;;
+VGV7519)
+       ucidef_set_led_default "power" "power" "power" "0"
+       ucidef_set_led_default "power2" "power2" "power2" "1"
+       ucidef_set_led_wlan "wireless_yellow" "wireless_yellow" "wireless_yellow" "phy0radio"
+       ucidef_set_led_netdev "internet_yellow" "internet_yellow" "internet_yellow" "nas0"
+       ucidef_set_led_netdev "broadband_yellow" "broadband_yellow" "broadband_yellow" "pppoe-wan"
+       ;;
+P2812HNUF*)
+       ucidef_set_led_default "power" "power" "power" "0"
+       ucidef_set_led_default "power2" "power2" "power2" "1"
+       ucidef_set_led_wlan "wireless_green" "wireless_green" "wireless_green" "phy0radio"
+       ucidef_set_led_netdev "dsl" "dsl" "dsl" "nas0"
+       ucidef_set_led_netdev "internet_green" "internet_green" "internet_green" "pppoe-wan"
+       ;;
 *)
        ;;
 esac
 
+for a in `ls /sys/class/leds/`; do
+       grep -q "\[none\]" /sys/class/leds/$a/trigger
+       [ $? -eq 0 ] && ucidef_set_led_default $a $a $a `cat /sys/class/leds/$a/brightness`
+done
+
 ucidef_commit_leds
 
 exit 0