lantiq: rename gphy firmware

[openwrt/openwrt.git] / target / linux / lantiq / dts / ARV7525PW.dts

diff --git a/target/linux/lantiq/dts/ARV7525PW.dts b/target/linux/lantiq/dts/ARV7525PW.dts
index e8893626abd9f6c911d8fc08d6c6b77a00378105..0007535895473e091d68d60b2606d2199066cfb4 100644 (file)
--- a/target/linux/lantiq/dts/ARV7525PW.dts
+++ b/target/linux/lantiq/dts/ARV7525PW.dts
@@ -1,12 +1,15 @@
 /dts-v1/;
 
-/include/ "danube.dtsi"
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
 
 / {
-       model = "ARV7525PW - Speedport W303V Typ A";
+       compatible = "arcadyan,arv7525pw", "lantiq,xway", "lantiq,danube";
+       model = "Speedport W303V Typ A";
 
        chosen {
-               bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+               bootargs = "console=ttyLTQ0,115200";
        };
 
        aliases {
@@ -26,7 +29,7 @@
        sram@1F000000 {
                vmmc@107000 {
                        status = "okay";
-                       gpios = <&gpio 31 0>;
+                       gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
                };
        };
 
@@ -68,12 +71,6 @@
                                        };
                                };
                        };
-
-                       ralink_eep {
-                               compatible = "ralink,eeprom";
-                               ralink,eeprom = "RT2860.eeprom";
-                               reg = <0 0x3f0410 0x110>;
-                       };
                };
 
                gpio: pinmux@E100B10 {
@@ -96,13 +93,6 @@
                        phy-mode = "mii";
                        mtd-mac-address = <&boardconfig 0x16>;
                };
-
-               pci@E105400 {
-                       status = "okay";
-                       interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
-                       req-mask = <0x1>;
-               };
-
        };
 
        gpio-keys-polled {
@@ -113,13 +103,13 @@
 
                wps {
                        label = "wps";
-                       gpios = <&gpio 29 1>;
-                       linux,code = <0x211>;
+                       gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
                reset {
                        label = "reset";
-                       gpios = <&gpio 30 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
        };
 
@@ -127,28 +117,39 @@
                compatible = "gpio-leds";
                power_green: power {
                        label = "arv7525pw:green:power";
-                       gpios = <&gpio 3 1>;
+                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
                        default-state = "keep";
                };
                power_red: power1 {
                        label = "arv7525pw:red:power";
-                       gpios = <&gpio 4 1>;
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
                };
                online: online {
                        label = "arv7525pw:green:online";
-                       gpios = <&gpio 5 1>;
+                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
                };
                voice {
                        label = "arv7525pw:green:telefonie";
-                       gpios = <&gpio 6 1>;
+                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
                };
                voice2 {
                        label = "arv7525pw:red:telefonie";
-                       gpios = <&gpio 8 1>;
+                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
                };
                wifi: wifi {
                        label = "arv7525pw:green:wlan";
-                       gpios = <&gpio 9 1>;
+                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
                };
        };
 };
+
+&pci0 {
+       status = "okay";
+       interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
+
+       wifi@0,0 {
+               compatible = "pci0,0";
+               reg = <0x7000 0 0 0 0>;
+               ralink,mtd-eeprom = <&boardconfig 0x410>;
+       };
+};