#include "danube.dtsi"
+#include <dt-bindings/input/input.h>
+
/ {
- model = "BTHOMEHUBV2B - BT Home Hub 2B"; /* SoC: Lantiq Danube-S PSB 50712 @ 333MHz V1.3/1.5 */
+ compatible = "bt,homehub-v2b", "lantiq,xway", "lantiq,danube";
+ model = "BT Home Hub 2B"; /* SoC: Lantiq Danube-S PSB 50712 @ 333MHz V1.3/1.5 */
chosen {
- bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+ bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-failsafe = &power_red;
led-running = &power_blue;
- led-internet = &broadband_blue;
+ led-dsl = &broadband_blue;
led-wifi = &wireless_blue;
};
};
fpi@10000000 {
- #address-cells = <1>;
- #size-cells = <1>;
localbus@0 {
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
- 1 0 0x4000000 0x4000010>; /* addsel1 */
- compatible = "lantiq,localbus", "simple-bus";
-
nor-boot@0 { /* NOR Flash: Spansion S29AL004D 512KB */
compatible = "lantiq,nor"; /* "AMD AM29LV400BB" compatible on 3.3.8 */
lantiq,cs = <0>;
};
nand-parts@0 { /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */
- compatible = "gen_nand", "lantiq,nand-xway";
+ compatible = "lantiq,nand-xway";
lantiq,cs = <1>;
bank-width = <2>;
reg = <1 0x0 0x2000000 >;
};
};
};
-
-
- ath9k_eep {
- compatible = "ath9k,eeprom";
- ath,eep-flash = <&ath9k_cal 0x0000>;
- ath,mac-increment = <1>;
- ath,pci-slot = <14>;
- ath,eep-endian;
- };
};
gpio: pinmux@E100B10 {
- compatible = "lantiq,pinctrl-xway";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
- #gpio-cells = <2>;
- gpio-controller;
- reg = <0xE100B10 0xA0>;
-
state_default: pinmux {
- stp {
- lantiq,groups = "stp";
- lantiq,function = "stp";
- lantiq,output = <1>;
- lantiq,open-drain = <0>;
- lantiq,pull = <0>;
- };
nand_out {
lantiq,groups = "nand cle", "nand ale";
lantiq,function = "ebu";
};
etop@E180000 {
- compatible = "lantiq,etop-xway";
- reg = <0xE180000 0x40000>;
- interrupt-parent = <&icu0>;
- interrupts = <73 78>;
phy-mode = "rmii";
- mac-address = [ 00 11 22 33 44 55 ];
};
ifxhcd@E101000 {
status = "okay";
};
- stp0: stp@E100BB0 {
- status = "okay";
- #gpio-cells = <2>;
- compatible = "lantiq,gpio-stp-xway";
- gpio-controller;
- reg = <0xE100BB0 0x40>;
-
- lantiq,shadow = <0xfff>;
- lantiq,groups = <0x3>;
- };
-
- pci@E105400 {
+ gpios: stp@E100BB0 {
status = "okay";
- lantiq,bus-clock = <33333333>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
- req-mask = <0x1>; /* GNT1 */
};
-
};
gpio-keys-polled {
findhandset {
label = "findhandset";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
+ linux,code = <KEY_PHONE>;
};
wps {
label = "wps";
upgrading-orange {
label = "bthomehubv2b:orange:upgrading";
- gpios = <&stp0 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpios 5 GPIO_ACTIVE_HIGH>;
};
phone-orange {
label = "bthomehubv2b:orange:phone";
- gpios = <&stp0 6 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpios 6 GPIO_ACTIVE_HIGH>;
};
phone-blue {
label = "bthomehubv2b:blue:phone";
- gpios = <&stp0 7 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpios 7 GPIO_ACTIVE_HIGH>;
};
wireless-orange {
label = "bthomehubv2b:orange:wireless";
- gpios = <&stp0 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpios 8 GPIO_ACTIVE_HIGH>;
};
wireless_blue: wireless-blue {
label = "bthomehubv2b:blue:wireless";
- gpios = <&stp0 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpios 9 GPIO_ACTIVE_HIGH>;
};
broadband-red {
label = "bthomehubv2b:red:broadband";
- gpios = <&stp0 10 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpios 10 GPIO_ACTIVE_HIGH>;
};
broadband-orange {
label = "bthomehubv2b:orange:broadband";
- gpios = <&stp0 11 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpios 11 GPIO_ACTIVE_HIGH>;
};
broadband_blue: broadband-blue {
label = "bthomehubv2b:blue:broadband";
- gpios = <&stp0 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpios 12 GPIO_ACTIVE_HIGH>;
};
power_red: power-red {
label = "bthomehubv2b:red:power";
- gpios = <&stp0 13 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpios 13 GPIO_ACTIVE_HIGH>;
};
power_orange: power-orange {
label = "bthomehubv2b:orange:power";
- gpios = <&stp0 14 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpios 14 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
power_blue: power-blue {
label = "bthomehubv2b:blue:power";
- gpios = <&stp0 15 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpios 15 GPIO_ACTIVE_HIGH>;
};
};
};
+&pci0 {
+ status = "okay";
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+ wifi@168c,0027 {
+ compatible = "pci168c,0027";
+ reg = <0x7000 0 0 0 0>;
+ qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+ };
+};