/dts-v1/;
-/include/ "ar9.dtsi"
+#include "ar9.dtsi"
+
+#include <dt-bindings/input/input.h>
/ {
model = "BTHOMEHUBV3A - BT Home Hub 3A"; /* SoC: Lantiq ar9 @ 333MHz */
- chosen {
- bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+ aliases {
+ led-boot = &power_orange;
+ led-failsafe = &power_red;
+ led-running = &power_blue;
+
+ led-internet = &broadband_blue;
+ led-wifi = &wireless_blue;
};
memory@0 { /* RAM: Samsung K4H511638F-LC 64MB */
sram@1F000000 {
vmmc@107000 {
status = "okay";
- gpios = <&gpio 31 0>;
+ gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
};
};
fpi@10000000 {
- #address-cells = <1>;
- #size-cells = <1>;
localbus@0 {
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
- 1 0 0x4000000 0x4000010>; /* addsel1 */
- compatible = "lantiq,localbus", "simple-bus";
-
nand-parts@0 { /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */
compatible = "gen_nand", "lantiq,nand-xway";
lantiq,cs = <1>;
#size-cells = <1>;
req-mask = <0x1>; /* PCI request lines to mask during NAND access */
- partition@0 {
- label = "preboot";
- reg = <0x00000 0x8000>;
- read-only;
- };
- partition@8000 {
- label = "u-boot";
- reg = <0x8000 0x05c000>;
- read-only;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "preboot";
+ reg = <0x00000 0x8000>;
+ read-only;
+ };
+ partition@8000 {
+ label = "u-boot";
+ reg = <0x8000 0x05c000>;
+ read-only;
+ };
+ partition@64000 {
+ label = "uboot_env";
+ reg = <0x64000 0x004000>;
+ };
+ ath9k_cal: partition@68000 {
+ label = "art-copy";
+ reg = <0x68000 0x004000>;
+ };
+ partition@6c000 {
+ label = "kernel";
+ reg = <0x6c000 0x200000>;
+ };
+ partition@26c000 {
+ label = "ubi";
+ reg = <0x26c000 0x1d94000>;
+ };
};
- partition@64000 {
- label = "uboot-config";
- reg = <0x64000 0x004000>;
- read-only;
- };
- ath9k_cal: partition@68000 {
- label = "art-copy";
- reg = <0x68000 0x004000>;
- read-only;
- };
- partition@6c000 {
- label = "kernel";
- reg = <0x6c000 0x200000>;
- };
- partition@26c000 {
- label = "ubi";
- reg = <0x26c000 0x1d94000>;
- };
- };
-
- ath9k_eep {
- compatible = "ath9k,eeprom";
- ath,eep-flash = <&ath9k_cal 0x0000>;
- ath,mac-offset = <0x10c>;
- ath,pci-slot = <14>;
- ath,eep-endian;
};
};
gpio: pinmux@E100B10 {
- compatible = "lantiq,pinctrl-xr9";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
- #gpio-cells = <2>;
- gpio-controller;
- reg = <0xE100B10 0xA0>;
-
state_default: pinmux {
nand_out {
lantiq,groups = "nand cle", "nand ale";
ifxhcd@E101000 {
status = "okay";
- gpios = <&gpio 33 0>;
- };
-
- pci@E105400 {
- status = "okay";
- gpio-reset = <&gpio 21 0>;
+ gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
};
-
};
gpio-keys-polled {
poll-interval = <100>;
reset {
label = "reset";
- gpios = <&gpio 54 1>;
- linux,code = <0x198>;
+ gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
};
restart {
label = "restart";
- gpios = <&gpio 52 1>;
- linux,code = <0x198>;
+ gpios = <&gpio 52 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
};
wps {
label = "wps";
- gpios = <&gpio 53 1>;
- linux,code = <0x211>;
+ gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
};
};
compatible = "gpio-leds";
wireless-red {
- label = "soc:red:wireless";
- gpios = <&gpio 2 1>;
+ label = "bthomehubv3a:red:wireless";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
wireless-orange {
- label = "soc:orange:wireless";
- gpios = <&gpio 6 1>;
+ label = "bthomehubv3a:orange:wireless";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
- wireless-blue {
- label = "soc:blue:wireless";
- gpios = <&gpio 9 1>;
+ wireless_blue: wireless-blue {
+ label = "bthomehubv3a:blue:wireless";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
};
broadband-red {
- label = "soc:red:broadband";
- gpios = <&gpio 11 1>;
+ label = "bthomehubv3a:red:broadband";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
broadband-orange {
- label = "soc:orange:broadband";
- gpios = <&gpio 0 1>;
+ label = "bthomehubv3a:orange:broadband";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
- broadband-blue {
- label = "soc:blue:broadband";
- gpios = <&gpio 12 1>;
+ broadband_blue: broadband-blue {
+ label = "bthomehubv3a:blue:broadband";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
- power-red {
- label = "soc:red:power";
- gpios = <&gpio 14 1>;
+ power_red: power-red {
+ label = "bthomehubv3a:red:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
- power-orange {
- label = "soc:orange:power";
- gpios = <&gpio 5 1>;
+ power_orange: power-orange {
+ label = "bthomehubv3a:orange:power";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
};
- power-blue {
- label = "soc:blue:power";
- gpios = <&gpio 1 1>;
+ power_blue: power-blue {
+ label = "bthomehubv3a:blue:power";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
};
-
};
+&pci0 {
+ status = "okay";
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+ ath9k@7000 {
+ reg = <0x7000 0 0 0 0>;
+ qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+ };
+};
projects / openwrt / openwrt.git / blobdiff