lantiq: specify console using stdout-path instead of cmdline argument
[openwrt/openwrt.git] / target / linux / lantiq / dts / VGV7519.dtsi
index 4a5611449d359a9133ee6a2c1b76affcbffd8372..2826dc2c47f9c32d88ede1fdf5434fe413bea525 100644 (file)
@@ -1,76 +1,74 @@
-/include/ "vr9.dtsi"
+#include "vr9.dtsi"
 
-/ {
-
-    model = "VGV7519 - KPN Experiabox V8";
+#include <dt-bindings/input/input.h>
 
+/ {
        chosen {
-               bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+               bootargs = "init=/etc/preinit mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1";
+       };
 
-               leds {
-                       boot = &power_green;
-                       failsafe = &power_red;
-                       running = &power_green;
+       aliases {
+               led-boot = &power_green;
+               led-failsafe = &power_red;
+               led-running = &power_green;
 
-                       dsl = &broadband_green;
-                       internet = &internet_green;
-                       wifi = &wireless_green;
-               };
+               led-dsl = &broadband_green;
+               led-internet = &internet_green;
+               led-wifi = &wireless_green;
+       };
+
+       sram@1F000000 {
+               vmmc@107000 {
+                       status = "okay";
+                       gpios = <&gpio 30 GPIO_ACTIVE_HIGH  //fxs relay
+                                &gpio 31 GPIO_ACTIVE_HIGH  //still unknown
+                                &gpio 3  GPIO_ACTIVE_HIGH>; //reset_slic?
+               };
        };
 
        memory@0 {
                reg = <0x0 0x4000000>;
        };
-       
-       fpi@10000000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "lantiq,fpi", "simple-bus";
-               ranges = <0x0 0x10000000 0xEEFFFFF>;
-               reg = <0x10000000 0xEF00000>;
 
+       fpi@10000000 {
                localbus@0 {
-                       #address-cells = <2>;
-                       #size-cells = <1>;
-                       compatible = "lantiq,localbus", "simple-bus";
+                       nor-boot@0 {
+                               compatible = "lantiq,nor";
+                               bank-width = <2>;
+                               reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+
+                               partitions {
+                                       compatible = "fixed-partitions";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       boardconfig: partition@40000 {
+                                               label = "board_config";
+                                               reg = <0x40000 0x10000>;
+                                               read-only;
+                                       };
+                               };
+                       };
                };
 
                gpio: pinmux@E100B10 {
-                       compatible = "lantiq,pinctrl-xr9";
                        pinctrl-names = "default";
                        pinctrl-0 = <&state_default>;
 
-                       interrupt-parent = <&icu0>;
-                       interrupts = <166 135 66 40 41 42 38>;
-
-                       #gpio-cells = <2>;
-                       gpio-controller;
-                       reg = <0xE100B10 0xA0>;
-
                        state_default: pinmux {
                                stp {
                                        lantiq,groups = "stp";
                                        lantiq,function = "stp";
-                               };
-                               spi {
-                                       lantiq,groups = "spi";
-                                       lantiq,function = "spi";
+                                       lantiq,open-drain = <0>;
+                                       lantiq,output = <1>;
+                                       lantiq,pull = <0>;
                                };
                                mdio {
                                        lantiq,groups = "mdio";
                                        lantiq,function = "mdio";
                                };
-                               gphy-leds_out {
-                                       lantiq,pins = "io7", "io44";
-                                       lantiq,pull = <0>;
-                                       lantiq,output = <1>;
-                               };
-                               stp_out {
-                                       lantiq,pins = "io4", "io5", "io6";
-                                       lantiq,open-drain = <0>;
-                                       lantiq,output = <1>;
-                                       lantiq,pull = <0>;
-                               };
                                pci-rst {
                                        lantiq,pins = "io21";
                                        lantiq,open-drain = <0>;
 
                ifxhcd@E101000 {
                        status = "okay";
-                       gpios = <&gpio 32 0>;
+                       gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
                        lantiq,portmask = <0x3>;
                };
 
-               pci@E105400 {
+               ifxhcd@E106000 {
                        status = "okay";
-                       #address-cells = <3>;
-                       #size-cells = <2>;
-                       #interrupt-cells = <1>;
-                       compatible = "lantiq,pci-xway";
-                       bus-range = <0x0 0x0>;
-                       ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
-                               0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
-                       reg = <0x7000000 0x8000         /* config space */
-                               0xE105400 0x400>;       /* pci bridge */
-                       lantiq,bus-clock = <33333333>;
-                       /*lantiq,external-clock;*/
-                       lantiq,delay-hi = <0>; /* 0ns delay */
-                       lantiq,delay-lo = <0>; /* 0.0ns delay */
-                       interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-                       interrupt-map = <
-                               0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
-                               >;
-                       gpio-reset = <&gpio 21 0>;
-                       req-mask = <0x1>;       /* GNT1 */
+                       gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
                };
 
                pcie@d900000 {
                phys = [ 00 01 ];
        };
 
-       ralink_eep {
-               compatible = "ralink,eeprom";
-               ralink,eeprom = "RT2860.eeprom";
-       };
-
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
                poll-interval = <100>;
                reset {
                        label = "reset";
-                       gpios = <&gpio 9 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
                eco {
                        label = "eco";
-                       gpios = <&gpio 41 1>;
-                       linux,code = <247>;
+                       gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
                };
                rfkill {
                        label = "rfkill";
-                       gpios = <&gpio 45 1>;
-                       linux,code = <0xf7>;
+                       gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RFKILL>;
                };
                wps {
                        label = "wps";
-                       gpios = <&gpio 10 1>;
-                       linux,code = <0x211>;
+                       gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
        };
 
 
                eco {
                        label = "vgv7519:blue:eco";
-                       gpios = <&stp 2 1>;
+                       gpios = <&stp 2 GPIO_ACTIVE_LOW>;
                };
                wps_red {
                        label = "vgv7519:red:wps";
-                       gpios = <&stp 3 1>;
+                       gpios = <&stp 3 GPIO_ACTIVE_LOW>;
                };
                wps_green {
                        label = "vgv7519:green:wps";
-                       gpios = <&stp 4 1>;
+                       gpios = <&stp 4 GPIO_ACTIVE_LOW>;
                };
                upgrade {
                        label = "vgv7519:blue:upgrade";
-                       gpios = <&stp 5 1>;
+                       gpios = <&stp 5 GPIO_ACTIVE_LOW>;
                };
                tv {
                        label = "vgv7519:green:tv";
-                       gpios = <&stp 6 1>;
+                       gpios = <&stp 6 GPIO_ACTIVE_LOW>;
                };
                internet_green: internet_green {
                        label = "vgv7519:green:internet";
-                       gpios = <&stp 7 1>;
+                       gpios = <&stp 7 GPIO_ACTIVE_LOW>;
                };
                internet_red {
                        label = "vgv7519:red:internet";
-                       gpios = <&stp 8 1>;
+                       gpios = <&stp 8 GPIO_ACTIVE_LOW>;
                };
                broadband_red {
                        label = "vgv7519:red:broadband";
-                       gpios = <&stp 9 1>;
+                       gpios = <&stp 9 GPIO_ACTIVE_LOW>;
                };
                broadband_green: broadband_green {
                        label = "vgv7519:green:broadband";
-                       gpios = <&stp 10 1>;
+                       gpios = <&stp 10 GPIO_ACTIVE_LOW>;
                };
                voice {
                        label = "vgv7519:green:voice";
-                       gpios = <&stp 11 1>;
+                       gpios = <&stp 11 GPIO_ACTIVE_LOW>;
                };
                wireless_red {
                        label = "vgv7519:red:wireless";
-                       gpios = <&stp 12 1>;
+                       gpios = <&stp 12 GPIO_ACTIVE_LOW>;
                };
                wireless_green: wireless_green {
                        label = "vgv7519:green:wireless";
-                       gpios = <&stp 13 1>;
+                       gpios = <&stp 13 GPIO_ACTIVE_LOW>;
                };
                power_green: power2 {
                        label = "vgv7519:green:power";
-                       gpios = <&stp 14 1>;
+                       gpios = <&stp 14 GPIO_ACTIVE_LOW>;
                        default-state = "keep";
                };
                power_red: power {
                        label = "vgv7519:red:power";
-                       gpios = <&stp 15 1>;
+                       gpios = <&stp 15 GPIO_ACTIVE_LOW>;
                };
        };
 };
 
+&pci0 {
+       status = "okay";
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+       wifi@1814,3091 {
+               compatible = "pci1814,3091";
+               reg = <0x7000 0 0 0 0>;
+               ralink,mtd-eeprom = <&boardconfig 0x410>;
+               ralink,mtd-eeprom-swap;
+               mtd-mac-address = <&boardconfig 0x16>;
+               mtd-mac-address-increment = <1>;
+       };
+};
+
 &eth0 {
        lan: interface@0 {
                compatible = "lantiq,xrx200-pdi";
                #address-cells = <1>;
                #size-cells = <0>;
                reg = <0>;
-               mac-address = [ 00 11 22 33 44 55 ];
+               mtd-mac-address = <&boardconfig 0x16>;
+               mtd-mac-address-increment = <1>;
+               lantiq,switch;
 
                ethernet@0 {
                        compatible = "lantiq,xrx200-pdi-port";
                #address-cells = <1>;
                #size-cells = <0>;
                reg = <1>;
-               mac-address = [ 00 11 22 33 44 56 ];
+               mtd-mac-address = <&boardconfig 0x16>;
                lantiq,wan;
+
                ethernet@5 {
                        compatible = "lantiq,xrx200-pdi-port";
                        reg = <5>;
                phy0: ethernet-phy@0 {
                        reg = <0x0>;
                        compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                       lantiq,c45-reg-init = <1 0 0 0>;
                };
                phy1: ethernet-phy@1 {
                        reg = <0x1>;
                        compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                       lantiq,c45-reg-init = <1 0 0 0>;
                };
                phy5: ethernet-phy@5 {
                        reg = <0x5>;
                        compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                       lantiq,c45-reg-init = <1 0 0 0>;
                };
                phy11: ethernet-phy@11 {
                        reg = <0x11>;
                        compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                       lantiq,c45-reg-init = <1 0 0 0>;
                };
                phy13: ethernet-phy@13 {
                        reg = <0x13>;
                        compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                       lantiq,c45-reg-init = <1 0 0 0>;
                };
        };
 };