lantiq: set port numbers corresponding to reg value

[openwrt/openwrt.git] / target / linux / lantiq / files-5.4 / arch / mips / boot / dts / lantiq / vr9_tplink_tdw89x0.dtsi

diff --git a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi
index eabbc0257f92d8f37665cb7277295dff9a9fd98f..c4ccac8932c185562824d19a2b68576219af732a 100644 (file)
--- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi
+++ b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi
@@ -121,24 +121,24 @@
                        phy-handle = <&phy0>;
                        // gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
                };
                        phy-handle = <&phy0>;
                        // gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
                };

-               ethernet@5 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <5>;
-                       phy-mode = "rgmii";
-                       phy-handle = <&phy5>;
-               };

                ethernet@2 {
                        compatible = "lantiq,xrx200-pdi-port";
                        reg = <2>;
                        phy-mode = "gmii";
                        phy-handle = <&phy11>;
                };
                ethernet@2 {
                        compatible = "lantiq,xrx200-pdi-port";
                        reg = <2>;
                        phy-mode = "gmii";
                        phy-handle = <&phy11>;
                };

-               ethernet@3 {
+               ethernet@4 {

                        compatible = "lantiq,xrx200-pdi-port";
                        reg = <4>;
                        phy-mode = "gmii";
                        phy-handle = <&phy13>;
                };
                        compatible = "lantiq,xrx200-pdi-port";
                        reg = <4>;
                        phy-mode = "gmii";
                        phy-handle = <&phy13>;
                };

+               ethernet@5 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <5>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy5>;
+               };

        };
 
        mdio {
        };
 
        mdio {