KERNEL := kernel-bin | gzip | uImage gzip
KERNEL_LOADADDR := 0x80080000
KERNEL_ENTRY_POINT := 0x80080000
+ DEVICE_DTS = freescale/$(subst _,-,$(1))
+ SUPPORTED_DEVICES = $(subst _,$(comma),$(1))
+ IMAGE_SIZE := 64m
IMAGE/sysupgrade.bin := append-kernel | pad-to 16M | \
- append-rootfs | pad-rootfs | check-size 50331649 | append-metadata
+ append-rootfs | pad-rootfs | \
+ check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
endef
-define Device/ls1012afrdm
+define Device/fsl_ls1012a-frdm
DEVICE_VENDOR := NXP
DEVICE_MODEL := FRDM-LS1012A
DEVICE_PACKAGES += \
layerscape-ppfe \
- tfa-ls1012afrdm \
+ tfa-ls1012a-frdm \
kmod-ppfe
- DEVICE_DTS := freescale/fsl-ls1012a-frdm
BLOCKSIZE := 256KiB
IMAGE/firmware.bin := \
ls-clean | \
ls-append pfe.itb | pad-to 15M | \
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
append-kernel | pad-to $$(BLOCKSIZE) | \
- append-rootfs | pad-rootfs | check-size 67108865
+ append-rootfs | pad-rootfs | check-size
IMAGE/sysupgrade.bin := append-kernel | pad-to $$(BLOCKSIZE) | \
- append-rootfs | pad-rootfs | check-size 50331648 | append-metadata
+ append-rootfs | pad-rootfs | \
+ check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
KERNEL := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
KERNEL_INITRAMFS := kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
- SUPPORTED_DEVICES := fsl,ls1012a-frdm
endef
-TARGET_DEVICES += ls1012afrdm
+TARGET_DEVICES += fsl_ls1012a-frdm
-define Device/ls1012ardb
+define Device/fsl_ls1012a-rdb
DEVICE_VENDOR := NXP
DEVICE_MODEL := LS1012A-RDB
DEVICE_PACKAGES += \
layerscape-ppfe \
- tfa-ls1012ardb \
+ tfa-ls1012a-rdb \
kmod-ppfe
- DEVICE_DTS := freescale/fsl-ls1012a-rdb
IMAGE/firmware.bin := \
ls-clean | \
ls-append $(1)-bl2.pbl | pad-to 1M | \
ls-append pfe.itb | pad-to 15M | \
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
append-kernel | pad-to 32M | \
- append-rootfs | pad-rootfs | check-size 67108865
- SUPPORTED_DEVICES := fsl,ls1012a-rdb
+ append-rootfs | pad-rootfs | check-size
endef
-TARGET_DEVICES += ls1012ardb
+TARGET_DEVICES += fsl_ls1012a-rdb
-define Device/ls1012afrwy
+define Device/fsl_ls1012a-frwy-sdboot
DEVICE_VENDOR := NXP
DEVICE_MODEL := FRWY-LS1012A
DEVICE_PACKAGES += \
layerscape-ppfe \
- tfa-ls1012afrwy \
+ tfa-ls1012a-frwy-sdboot \
kmod-ppfe
DEVICE_DTS := freescale/fsl-ls1012a-frwy
FILESYSTEMS := ext4
- IMAGES := firmware.bin sdcard.img
+ IMAGES := firmware.bin sdcard.img sysupgrade.bin
IMAGE/firmware.bin := \
ls-clean | \
ls-append $(1)-bl2.pbl | pad-to 128K | \
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
+ IMAGE/sysupgrade.bin := \
+ ls-clean | \
+ ls-append-sdhead $(1) | pad-to 16M | \
+ append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
+ append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
endef
-TARGET_DEVICES += ls1012afrwy
+TARGET_DEVICES += fsl_ls1012a-frwy-sdboot
-define Device/ls1043ardb
+define Device/fsl_ls1043a-rdb
DEVICE_VENDOR := NXP
DEVICE_MODEL := LS1043A-RDB
DEVICE_VARIANT := Default
DEVICE_PACKAGES += \
layerscape-fman \
- tfa-ls1043ardb \
- fmc fmc-eth-config
+ tfa-ls1043a-rdb \
+ fmc fmc-eth-config \
+ kmod-ahci-qoriq \
+ kmod-hwmon-ina2xx \
+ kmod-hwmon-lm90
DEVICE_DTS := freescale/fsl-ls1043a-rdb-sdk
IMAGE/firmware.bin := \
ls-clean | \
ls-append $(1)-fman.bin | pad-to 15M | \
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
append-kernel | pad-to 32M | \
- append-rootfs | pad-rootfs | check-size 67108865
- SUPPORTED_DEVICES := fsl,ls1043a-rdb
+ append-rootfs | pad-rootfs | check-size
endef
-TARGET_DEVICES += ls1043ardb
+TARGET_DEVICES += fsl_ls1043a-rdb
-define Device/ls1043ardb-sdboot
+define Device/fsl_ls1043a-rdb-sdboot
DEVICE_VENDOR := NXP
DEVICE_MODEL := LS1043A-RDB
DEVICE_VARIANT := SD Card Boot
DEVICE_PACKAGES += \
layerscape-fman \
- tfa-ls1043ardb-sdboot \
- fmc fmc-eth-config
+ tfa-ls1043a-rdb-sdboot \
+ fmc fmc-eth-config \
+ kmod-ahci-qoriq \
+ kmod-hwmon-ina2xx \
+ kmod-hwmon-lm90
DEVICE_DTS := freescale/fsl-ls1043a-rdb-sdk
FILESYSTEMS := ext4
- IMAGES := sdcard.img
+ IMAGES := sdcard.img sysupgrade.bin
IMAGE/sdcard.img := \
ls-clean | \
ls-append-sdhead $(1) | pad-to 4K | \
ls-append $(1)-bl2.pbl | pad-to 1M | \
ls-append $(1)-fip.bin | pad-to 5M | \
ls-append $(1)-uboot-env.bin | pad-to 9M | \
- ls-append ls1043ardb-fman.bin | pad-to 15M | \
+ ls-append fsl_ls1043a-rdb-fman.bin | pad-to 15M | \
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
+ IMAGE/sysupgrade.bin := \
+ ls-clean | \
+ ls-append-sdhead $(1) | pad-to 16M | \
+ append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
+ append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
endef
-TARGET_DEVICES += ls1043ardb-sdboot
+TARGET_DEVICES += fsl_ls1043a-rdb-sdboot
-define Device/ls1046ardb
+define Device/fsl_ls1046a-rdb
DEVICE_VENDOR := NXP
DEVICE_MODEL := LS1046A-RDB
DEVICE_VARIANT := Default
DEVICE_PACKAGES += \
layerscape-fman \
- tfa-ls1046ardb \
- fmc fmc-eth-config
+ tfa-ls1046a-rdb \
+ fmc fmc-eth-config \
+ kmod-ahci-qoriq \
+ kmod-hwmon-ina2xx \
+ kmod-hwmon-lm90
DEVICE_DTS := freescale/fsl-ls1046a-rdb-sdk
IMAGE/firmware.bin := \
ls-clean | \
ls-append $(1)-fman.bin | pad-to 15M | \
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
append-kernel | pad-to 32M | \
- append-rootfs | pad-rootfs | check-size 67108865
- SUPPORTED_DEVICES := fsl,ls1046a-rdb
+ append-rootfs | pad-rootfs | check-size
endef
-TARGET_DEVICES += ls1046ardb
+TARGET_DEVICES += fsl_ls1046a-rdb
-define Device/ls1046ardb-sdboot
+define Device/fsl_ls1046a-rdb-sdboot
DEVICE_VENDOR := NXP
DEVICE_MODEL := LS1046A-RDB
DEVICE_VARIANT := SD Card Boot
DEVICE_PACKAGES += \
layerscape-fman \
- tfa-ls1046ardb-sdboot \
- fmc fmc-eth-config
+ tfa-ls1046a-rdb-sdboot \
+ fmc fmc-eth-config \
+ kmod-ahci-qoriq \
+ kmod-hwmon-ina2xx \
+ kmod-hwmon-lm90
DEVICE_DTS := freescale/fsl-ls1046a-rdb-sdk
FILESYSTEMS := ext4
- IMAGES := sdcard.img
+ IMAGES := sdcard.img sysupgrade.bin
IMAGE/sdcard.img := \
ls-clean | \
ls-append-sdhead $(1) | pad-to 4K | \
ls-append $(1)-bl2.pbl | pad-to 1M | \
ls-append $(1)-fip.bin | pad-to 5M | \
ls-append $(1)-uboot-env.bin | pad-to 9M | \
- ls-append ls1046ardb-fman.bin | pad-to 15M | \
+ ls-append fsl_ls1046a-rdb-fman.bin | pad-to 15M | \
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
+ IMAGE/sysupgrade.bin := \
+ ls-clean | \
+ ls-append-sdhead $(1) | pad-to 16M | \
+ append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
+ append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
endef
-TARGET_DEVICES += ls1046ardb-sdboot
+TARGET_DEVICES += fsl_ls1046a-rdb-sdboot
-define Device/ls1088ardb
+define Device/fsl_ls1088a-rdb
DEVICE_VENDOR := NXP
DEVICE_MODEL := LS1088A-RDB
DEVICE_VARIANT := Default
DEVICE_PACKAGES += \
layerscape-mc \
layerscape-dpl \
- tfa-ls1088ardb \
- restool
- DEVICE_DTS := freescale/fsl-ls1088a-rdb
+ tfa-ls1088a-rdb \
+ restool \
+ kmod-ahci-qoriq \
+ kmod-hwmon-ina2xx \
+ kmod-hwmon-lm90
IMAGE/firmware.bin := \
ls-clean | \
ls-append $(1)-bl2.pbl | pad-to 1M | \
ls-append $(1)-dpc.dtb | pad-to 15M | \
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
append-kernel | pad-to 32M | \
- append-rootfs | pad-rootfs | check-size 67108865
- SUPPORTED_DEVICES := fsl,ls1088a-rdb
+ append-rootfs | pad-rootfs | check-size
endef
-TARGET_DEVICES += ls1088ardb
+TARGET_DEVICES += fsl_ls1088a-rdb
-define Device/ls1088ardb-sdboot
+define Device/fsl_ls1088a-rdb-sdboot
DEVICE_VENDOR := NXP
DEVICE_MODEL := LS1088A-RDB
DEVICE_VARIANT := SD Card Boot
DEVICE_PACKAGES += \
layerscape-mc \
layerscape-dpl \
- tfa-ls1088ardb-sdboot \
- restool
+ tfa-ls1088a-rdb-sdboot \
+ restool \
+ kmod-ahci-qoriq \
+ kmod-hwmon-ina2xx \
+ kmod-hwmon-lm90
DEVICE_DTS := freescale/fsl-ls1088a-rdb
FILESYSTEMS := ext4
- IMAGES := sdcard.img
+ IMAGES := sdcard.img sysupgrade.bin
IMAGE/sdcard.img := \
ls-clean | \
ls-append-sdhead $(1) | pad-to 4K | \
ls-append $(1)-bl2.pbl | pad-to 1M | \
ls-append $(1)-fip.bin | pad-to 5M | \
ls-append $(1)-uboot-env.bin | pad-to 10M | \
- ls-append ls1088ardb-mc.itb | pad-to 13M | \
- ls-append ls1088ardb-dpl.dtb | pad-to 14M | \
- ls-append ls1088ardb-dpc.dtb | pad-to 15M | \
+ ls-append fsl_ls1088a-rdb-mc.itb | pad-to 13M | \
+ ls-append fsl_ls1088a-rdb-dpl.dtb | pad-to 14M | \
+ ls-append fsl_ls1088a-rdb-dpc.dtb | pad-to 15M | \
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
+ IMAGE/sysupgrade.bin := \
+ ls-clean | \
+ ls-append-sdhead $(1) | pad-to 16M | \
+ append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
+ append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
endef
-TARGET_DEVICES += ls1088ardb-sdboot
+TARGET_DEVICES += fsl_ls1088a-rdb-sdboot
-define Device/ls2088ardb
+define Device/fsl_ls2088a-rdb
DEVICE_VENDOR := NXP
DEVICE_MODEL := LS2088ARDB
DEVICE_PACKAGES += \
layerscape-mc \
layerscape-dpl \
- tfa-ls2088ardb \
- restool
- DEVICE_DTS := freescale/fsl-ls2088a-rdb
+ tfa-ls2088a-rdb \
+ restool \
+ kmod-ahci-qoriq
IMAGE/firmware.bin := \
ls-clean | \
ls-append $(1)-bl2.pbl | pad-to 1M | \
ls-append $(1)-dpc.dtb | pad-to 15M | \
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
append-kernel | pad-to 32M | \
- append-rootfs | pad-rootfs | check-size 67108865
- SUPPORTED_DEVICES := fsl,ls2088a-rdb
+ append-rootfs | pad-rootfs | check-size
endef
-TARGET_DEVICES += ls2088ardb
+TARGET_DEVICES += fsl_ls2088a-rdb
-define Device/traverse-ls1043
+define Device/traverse_ls1043
DEVICE_VENDOR := Traverse
DEVICE_MODEL := LS1043 Boards
KERNEL_NAME := Image
MKUBIFS_OPTS := -m 2048 -e 124KiB -c 4096
SUPPORTED_DEVICES := traverse,ls1043s traverse,ls1043v
endef
-TARGET_DEVICES += traverse-ls1043
+TARGET_DEVICES += traverse_ls1043