DEVICE_VARS += TPLINK_HWID TPLINK_HWREV TPLINK_FLASHLAYOUT
+define rootfs_align
+$(patsubst %-256k,0x40000,$(patsubst %-128k,0x20000,$(patsubst %-64k,0x10000,$(patsubst squashfs%,0x4,$(patsubst root.%,%,$(1))))))
+endef
+
+define Build/copy-file
+ cat "$(1)" > "$@"
+endef
+
+# combine kernel and rootfs into one image
+# mktplinkfw <type> <optional extra arguments to mktplinkfw binary>
+# <type> is "sysupgrade" or "factory"
+#
+# -a align the rootfs start on an <align> bytes boundary
+# -j add jffs2 end-of-filesystem markers
+# -s strip padding from end of the image
+# -X reserve <size> bytes in the firmware image (hexval prefixed with 0x)
+define Build/mktplinkfw
+ -$(STAGING_DIR_HOST)/bin/mktplinkfw \
+ -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) \
+ -k $(IMAGE_KERNEL) \
+ -r $@ \
+ -o $@.new \
+ -j -X 0x40000 \
+ -a $(call rootfs_align,$(FILESYSTEM)) \
+ $(wordlist 2,$(words $(1)),$(1)) \
+ $(if $(findstring sysupgrade,$(word 1,$(1))),-s) && mv $@.new $@ || rm -f $@
+endef
+
define Device/Default
PROFILES := Default
- DEVICE_DTS := $(1)
+ DEVICE_DTS := $(lastword $(subst _, ,$(1)))
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
KERNEL_ENTRY := 0x00000000
KERNEL_LOADADDR := 0x00000000
KERNEL := kernel-bin
-endef
-
-define Build/tplink-v1-image
- $(STAGING_DIR_HOST)/bin/mktplinkfw \
- -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) \
- -N "$(VERSION_DIST)" -V $(REVISION) \
- -k $(IMAGE_KERNEL) \
- -r $(IMAGE_ROOTFS) \
- -j \
- $(1) \
- -o $@
+ SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
endef
ifeq ($(SUBTARGET),generic)
-define Device/tl-wdr4900-v1
- DEVICE_TITLE := TP-Link TL-WDR4900
- DEVICE_PACKAGES := kmod-ath9k wpad-mini
+define Device/tplink_tl-wdr4900-v1
+ DEVICE_VENDOR := TP-Link
+ DEVICE_MODEL := TL-WDR4900
+ DEVICE_VARIANT := v1
TPLINK_HWID := 0x49000001
TPLINK_HWREV := 1
TPLINK_FLASHLAYOUT := 16Mppc
- KERNEL_NAME := cuImage.tl-wdr4900-v1
- SUPPORTED_DEVICES:=tl-wdr4900-v1 tplink,tl-wdr4900-v1
+ KERNEL_SIZE := 2684k
+ KERNEL_NAME := simpleImage.tl-wdr4900-v1
+ KERNEL_INITRAMFS :=
+ KERNEL := kernel-bin | uImage none
+ KERNEL_ENTRY := 0x1000000
+ KERNEL_LOADADDR := 0x1000000
+ SUPPORTED_DEVICES += tl-wdr4900-v1
+ ARTIFACTS := fdt.bin
+ ARTIFACT/fdt.bin := append-dtb
IMAGES := fdt.bin factory.bin sysupgrade.bin
- IMAGE/fdt.bin := append-dtb
- IMAGE/factory.bin := tplink-v1-image
- IMAGE/sysupgrade.bin := tplink-v1-image -s | append-metadata
+ IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade | append-metadata
+ IMAGE/factory.bin := append-rootfs | mktplinkfw factory
+endef
+TARGET_DEVICES += tplink_tl-wdr4900-v1
+
+define Device/sophos_red-15w-rev1
+ DEVICE_VENDOR := Sophos
+ DEVICE_MODEL := RED 15w
+ DEVICE_VARIANT := Rev.1
+ # Original firmware uses a dedicated DTB-partition.
+ # The bootloader however supports FIT-images.
+ KERNEL = kernel-bin | gzip | fit gzip $(KDIR)/image-$$(DEVICE_DTS).dtb
+ IMAGES := sysupgrade.bin
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
-TARGET_DEVICES += tl-wdr4900-v1
+TARGET_DEVICES += sophos_red-15w-rev1
endif
ifeq ($(SUBTARGET),p1020)
-define Device/hiveap-330
- DEVICE_TITLE := Aerohive HiveAP-330
- DEVICE_PACKAGES := kmod-ath9k wpad-mini kmod-tpm-i2c-atmel
+define Device/aerohive_hiveap-330
+ DEVICE_VENDOR := Aerohive
+ DEVICE_MODEL := HiveAP-330
+ DEVICE_PACKAGES := kmod-tpm-i2c-atmel
BLOCKSIZE := 128k
- KERNEL_NAME := zImage
+ KERNEL := kernel-bin | gzip | uImage gzip
KERNEL_SIZE := 8m
- SUPPORTED_DEVICES := aerohive,hiveap-330
+ KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux-initramfs | uImage none
IMAGES := fdt.bin sysupgrade.bin
IMAGE/fdt.bin := append-dtb
IMAGE/sysupgrade.bin := append-dtb | pad-to 256k | check-size 256k | \
append-rootfs | pad-rootfs $$(BLOCKSIZE) | pad-to 41216k | check-size 41216k | \
append-kernel | append-metadata
endef
-TARGET_DEVICES += hiveap-330
+TARGET_DEVICES += aerohive_hiveap-330
+
+define Device/enterasys_ws-ap3710i
+ DEVICE_VENDOR := Enterasys
+ DEVICE_MODEL := WS-AP3710i
+ BLOCKSIZE := 128k
+ KERNEL = kernel-bin | lzma | fit lzma $(KDIR)/image-$$(DEVICE_DTS).dtb
+ IMAGES := sysupgrade.bin
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+endef
+TARGET_DEVICES += enterasys_ws-ap3710i
+
+define Device/ocedo_panda
+ DEVICE_VENDOR := OCEDO
+ DEVICE_MODEL := Panda
+ DEVICE_PACKAGES := kmod-rtc-ds1307 uboot-envtools
+ KERNEL = kernel-bin | gzip | fit gzip $(KDIR)/image-$$(DEVICE_DTS).dtb
+ PAGESIZE := 2048
+ SUBPAGESIZE := 512
+ BLOCKSIZE := 128k
+ IMAGES := fdt.bin sysupgrade.bin
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ IMAGE/fdt.bin := append-dtb
+endef
+TARGET_DEVICES += ocedo_panda
+
+endif
+
+ifeq ($(SUBTARGET),p2020)
+
+define Device/freescale_p2020rdb
+ DEVICE_VENDOR := Freescale
+ DEVICE_MODEL := P2020RDB
+ DEVICE_DTS_DIR := $(DTS_DIR)/fsl
+ DEVICE_PACKAGES := kmod-hwmon-core kmod-hwmon-lm90 kmod-rtc-ds1307 \
+ kmod-gpio-pca953x kmod-eeprom-at24
+ BLOCKSIZE := 128k
+ KERNEL := kernel-bin | gzip | \
+ fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+ SUPPORTED_DEVICES := fsl,P2020RDB
+ IMAGES := sysupgrade.bin
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
+ pad-rootfs $$(BLOCKSIZE) | append-metadata
+endef
+TARGET_DEVICES += freescale_p2020rdb
endif
projects / openwrt / openwrt.git / blobdiff