mpc85xx: add support for Enterasys WS-AP3710i

[openwrt/openwrt.git] / target / linux / mpc85xx / image / Makefile

diff --git a/target/linux/mpc85xx/image/Makefile b/target/linux/mpc85xx/image/Makefile
index f95e38d5c6d2d1c49c33939a5c1cfa5f72ff430e..5ca16909e7a285a6cb433f69085ddf5d6169e2a0 100644 (file)
--- a/target/linux/mpc85xx/image/Makefile
+++ b/target/linux/mpc85xx/image/Makefile
@@ -37,54 +37,62 @@ endef
 
 define Device/Default
   PROFILES := Default
-  DEVICE_DTS := $(1)
+  DEVICE_DTS := $(lastword $(subst _, ,$(1)))
   KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
   KERNEL_ENTRY := 0x00000000
   KERNEL_LOADADDR := 0x00000000
   KERNEL := kernel-bin
+  SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
 endef
 
 ifeq ($(SUBTARGET),generic)
 
-define Device/tl-wdr4900-v1
-  DEVICE_TITLE := TP-Link TL-WDR4900
+define Device/tplink_tl-wdr4900-v1
+  DEVICE_VENDOR := TP-Link
+  DEVICE_MODEL := TL-WDR4900
+  DEVICE_VARIANT := v1
   TPLINK_HWID := 0x49000001
   TPLINK_HWREV := 1
   TPLINK_FLASHLAYOUT := 16Mppc
   KERNEL_SIZE := 2684k
-  KERNEL_NAME := cuImage.tl-wdr4900-v1
+  KERNEL_NAME := simpleImage.tl-wdr4900-v1
   KERNEL_INITRAMFS :=
-  SUPPORTED_DEVICES:=tl-wdr4900-v1 tplink,tl-wdr4900-v1
+  KERNEL := kernel-bin | uImage none
+  KERNEL_ENTRY := 0x1000000
+  KERNEL_LOADADDR := 0x1000000
+  SUPPORTED_DEVICES += tl-wdr4900-v1
+  ARTIFACTS := fdt.bin
+  ARTIFACT/fdt.bin := append-dtb
   IMAGES := fdt.bin factory.bin sysupgrade.bin
-  IMAGE/fdt.bin := append-dtb
   IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade | append-metadata
   IMAGE/factory.bin := append-rootfs | mktplinkfw factory
 endef
-#TARGET_DEVICES += tl-wdr4900-v1
+TARGET_DEVICES += tplink_tl-wdr4900-v1
 
-define Device/red-15w-rev1
-  DEVICE_TITLE := Sophos RED 15w Rev.1
+define Device/sophos_red-15w-rev1
+  DEVICE_VENDOR := Sophos
+  DEVICE_MODEL := RED 15w
+  DEVICE_VARIANT := Rev.1
   # Original firmware uses a dedicated DTB-partition.
   # The bootloader however supports FIT-images.
   KERNEL = kernel-bin | gzip | fit gzip $(KDIR)/image-$$(DEVICE_DTS).dtb
-  SUPPORTED_DEVICES := sophos,red-15w-rev1
   IMAGES := sysupgrade.bin
   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 endef
-TARGET_DEVICES += red-15w-rev1
+TARGET_DEVICES += sophos_red-15w-rev1
 
 endif
 
 ifeq ($(SUBTARGET),p1020)
 
-define Device/hiveap-330
-  DEVICE_TITLE := Aerohive HiveAP-330
+define Device/aerohive_hiveap-330
+  DEVICE_VENDOR := Aerohive
+  DEVICE_MODEL := HiveAP-330
   DEVICE_PACKAGES := kmod-tpm-i2c-atmel
   BLOCKSIZE := 128k
-  KERNEL_NAME := zImage
+  KERNEL := kernel-bin | gzip | uImage gzip
   KERNEL_SIZE := 8m
   KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux-initramfs | uImage none
-  SUPPORTED_DEVICES := aerohive,hiveap-330
   IMAGES := fdt.bin sysupgrade.bin
   IMAGE/fdt.bin := append-dtb
   IMAGE/sysupgrade.bin := append-dtb | pad-to 256k | check-size 256k | \
@@ -92,28 +100,39 @@ define Device/hiveap-330
        append-rootfs | pad-rootfs $$(BLOCKSIZE) | pad-to 41216k | check-size 41216k | \
        append-kernel | append-metadata
 endef
-TARGET_DEVICES += hiveap-330
+TARGET_DEVICES += aerohive_hiveap-330
+
+define Device/enterasys_ws-ap3710i
+  DEVICE_VENDOR := Enterasys
+  DEVICE_MODEL := WS-AP3710i
+  BLOCKSIZE := 128k
+  KERNEL = kernel-bin | lzma | fit lzma $(KDIR)/image-$$(DEVICE_DTS).dtb
+  IMAGES := sysupgrade.bin
+  IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+endef
+TARGET_DEVICES += enterasys_ws-ap3710i
 
-define Device/panda
-  DEVICE_TITLE := OCEDO Panda
+define Device/ocedo_panda
+  DEVICE_VENDOR := OCEDO
+  DEVICE_MODEL := Panda
   DEVICE_PACKAGES := kmod-rtc-ds1307 uboot-envtools
   KERNEL = kernel-bin | gzip | fit gzip $(KDIR)/image-$$(DEVICE_DTS).dtb
   PAGESIZE := 2048
   SUBPAGESIZE := 512
   BLOCKSIZE := 128k
-  SUPPORTED_DEVICES := ocedo,panda
   IMAGES := fdt.bin sysupgrade.bin
   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
   IMAGE/fdt.bin := append-dtb
 endef
-TARGET_DEVICES += panda
+TARGET_DEVICES += ocedo_panda
 
 endif
 
 ifeq ($(SUBTARGET),p2020)
 
-define Device/p2020rdb
-  DEVICE_TITLE := Freescale P2020RDB
+define Device/freescale_p2020rdb
+  DEVICE_VENDOR := Freescale
+  DEVICE_MODEL := P2020RDB
   DEVICE_DTS_DIR := $(DTS_DIR)/fsl
   DEVICE_PACKAGES := kmod-hwmon-core kmod-hwmon-lm90 kmod-rtc-ds1307 \
        kmod-gpio-pca953x kmod-eeprom-at24
@@ -125,7 +144,7 @@ define Device/p2020rdb
   IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
        pad-rootfs $$(BLOCKSIZE) | append-metadata
 endef
-TARGET_DEVICES += p2020rdb
+TARGET_DEVICES += freescale_p2020rdb
 
 endif