#
-# Copyright (C) 2010 OpenWrt.org
-#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
-define imgname
-$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(patsubst jffs2-%,jffs2,$(patsubst squashfs-%,squashfs,$(1)))
-endef
+DEVICE_VARS += TPLINK_HWID TPLINK_HWREV TPLINK_FLASHLAYOUT
-define sysupname
-$(call imgname,$(1),$(2))-sysupgrade.bin
+define rootfs_align
+$(patsubst %-256k,0x40000,$(patsubst %-128k,0x20000,$(patsubst %-64k,0x10000,$(patsubst squashfs%,0x4,$(patsubst root.%,%,$(1))))))
endef
-define factoryname
-$(call imgname,$(1),$(2))-factory.bin
+define Build/copy-file
+ cat "$(1)" > "$@"
endef
-ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
- IMAGE_SUFFIX=-initramfs
-endif
-
-zImage:=$(BIN_DIR)/$(IMG_PREFIX)-zImage$(IMAGE_SUFFIX)
-
-DTS_TARGETS = mpc8548cds_32b p1010rdb tl-wdr4900-v1 p1020rdb
-BOOT_IMAGES:=zImage cuImage.tl-wdr4900-v1
-
-define Image/Prepare
- $(foreach image,$(BOOT_IMAGES),
- cp $(LINUX_DIR)/arch/powerpc/boot/$(image) $(KDIR)/$(image)
- )
+# combine kernel and rootfs into one image
+# mktplinkfw <type> <optional extra arguments to mktplinkfw binary>
+# <type> is "sysupgrade" or "factory"
+#
+# -a align the rootfs start on an <align> bytes boundary
+# -j add jffs2 end-of-filesystem markers
+# -s strip padding from end of the image
+# -X reserve <size> bytes in the firmware image (hexval prefixed with 0x)
+define Build/mktplinkfw
+ -$(STAGING_DIR_HOST)/bin/mktplinkfw \
+ -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) \
+ -k $(IMAGE_KERNEL) \
+ -r $@ \
+ -o $@.new \
+ -j -X 0x40000 \
+ -a $(call rootfs_align,$(FILESYSTEM)) \
+ $(wordlist 2,$(words $(1)),$(1)) \
+ $(if $(findstring sysupgrade,$(word 1,$(1))),-s) && mv $@.new $@ || rm -f $@
endef
-define Image/BuildKernel
- cp $(KDIR)/zImage $(zImage)
- $(foreach dts,$(DTS_TARGETS),
- $(LINUX_DIR)/scripts/dtc/dtc -I dts -O dtb $(LINUX_DIR)/arch/powerpc/boot/dts/$(dts).dts > $(BIN_DIR)/$(IMG_PREFIX)-$(dts).fdt
- )
+define Device/Default
+ PROFILES := Default
+ DEVICE_DTS := $(lastword $(subst _, ,$(1)))
+ KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
+ KERNEL_ENTRY := 0x00000000
+ KERNEL_LOADADDR := 0x00000000
+ KERNEL := kernel-bin
+ SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
endef
-define Image/Build/TPLINK
- -$(STAGING_DIR_HOST)/bin/mktplinkfw \
- -H $(4) -W $(5) -F $(6) -N OpenWrt -V $(REVISION) $(7) \
- -k $(KDIR)/$(3) \
- -r $(KDIR)/root.$(1) \
- -o $(call factoryname,$(1),$(2))
- -$(STAGING_DIR_HOST)/bin/mktplinkfw \
- -H $(4) -W $(5) -F $(6) -N OpenWrt -V $(REVISION) $(7) -s \
- -k $(KDIR)/$(3) \
- -r $(KDIR)/root.$(1) \
- -o $(call sysupname,$(1),$(2))
+ifeq ($(SUBTARGET),generic)
+
+define Device/tplink_tl-wdr4900-v1
+ DEVICE_VENDOR := TP-Link
+ DEVICE_MODEL := TL-WDR4900
+ DEVICE_VARIANT := v1
+ TPLINK_HWID := 0x49000001
+ TPLINK_HWREV := 1
+ TPLINK_FLASHLAYOUT := 16Mppc
+ KERNEL_SIZE := 2684k
+ KERNEL_NAME := simpleImage.tl-wdr4900-v1
+ KERNEL_INITRAMFS :=
+ KERNEL := kernel-bin | uImage none
+ KERNEL_ENTRY := 0x1000000
+ KERNEL_LOADADDR := 0x1000000
+ SUPPORTED_DEVICES += tl-wdr4900-v1
+ ARTIFACTS := fdt.bin
+ ARTIFACT/fdt.bin := append-dtb
+ IMAGES := fdt.bin factory.bin sysupgrade.bin
+ IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade | append-metadata
+ IMAGE/factory.bin := append-rootfs | mktplinkfw factory
endef
-
-define Image/Build/Profile/TLWDR4900
- $(call Image/Build/TPLINK,$(1),tl-wdr4900-v1,cuImage.tl-wdr4900-v1,0x49000001,1,16Mppc)
+TARGET_DEVICES += tplink_tl-wdr4900-v1
+
+define Device/sophos_red-15w-rev1
+ DEVICE_VENDOR := Sophos
+ DEVICE_MODEL := RED 15w
+ DEVICE_VARIANT := Rev.1
+ # Original firmware uses a dedicated DTB-partition.
+ # The bootloader however supports FIT-images.
+ KERNEL = kernel-bin | gzip | fit gzip $(KDIR)/image-$$(DEVICE_DTS).dtb
+ IMAGES := sysupgrade.bin
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
+TARGET_DEVICES += sophos_red-15w-rev1
-define Image/Build/Profile/Default
- $(call Image/Build/Profile/TLWDR4900,$(1))
-endef
+endif
-define Image/Build/ext2
- cp $(KDIR)/root.$(1) $(BIN_DIR)/$(IMG_PREFIX)-ext2.img
+ifeq ($(SUBTARGET),p1020)
+
+define Device/aerohive_hiveap-330
+ DEVICE_VENDOR := Aerohive
+ DEVICE_MODEL := HiveAP-330
+ DEVICE_PACKAGES := kmod-tpm-i2c-atmel
+ BLOCKSIZE := 128k
+ KERNEL := kernel-bin | gzip | uImage gzip
+ KERNEL_SIZE := 8m
+ KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux-initramfs | uImage none
+ IMAGES := fdt.bin sysupgrade.bin
+ IMAGE/fdt.bin := append-dtb
+ IMAGE/sysupgrade.bin := append-dtb | pad-to 256k | check-size 256k | \
+ append-uImage-fakehdr ramdisk | pad-to 256k | check-size 512k | \
+ append-rootfs | pad-rootfs $$(BLOCKSIZE) | pad-to 41216k | check-size 41216k | \
+ append-kernel | append-metadata
endef
-
-define Image/Build/squashfs
- $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
- cp $(KDIR)/root.squashfs $(BIN_DIR)/$(IMG_PREFIX)-root.squashfs
+TARGET_DEVICES += aerohive_hiveap-330
+
+define Device/ocedo_panda
+ DEVICE_VENDOR := OCEDO
+ DEVICE_MODEL := Panda
+ DEVICE_PACKAGES := kmod-rtc-ds1307 uboot-envtools
+ KERNEL = kernel-bin | gzip | fit gzip $(KDIR)/image-$$(DEVICE_DTS).dtb
+ PAGESIZE := 2048
+ SUBPAGESIZE := 512
+ BLOCKSIZE := 128k
+ IMAGES := fdt.bin sysupgrade.bin
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ IMAGE/fdt.bin := append-dtb
endef
+TARGET_DEVICES += ocedo_panda
-PROFILE ?= Default
+endif
-define Image/Build
- $(call Image/Build/$(1),$(1))
- $(call Image/Build/Profile/$(PROFILE),$(1))
+ifeq ($(SUBTARGET),p2020)
+
+define Device/freescale_p2020rdb
+ DEVICE_VENDOR := Freescale
+ DEVICE_MODEL := P2020RDB
+ DEVICE_DTS_DIR := $(DTS_DIR)/fsl
+ DEVICE_PACKAGES := kmod-hwmon-core kmod-hwmon-lm90 kmod-rtc-ds1307 \
+ kmod-gpio-pca953x kmod-eeprom-at24
+ BLOCKSIZE := 128k
+ KERNEL := kernel-bin | gzip | \
+ fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+ SUPPORTED_DEVICES := fsl,P2020RDB
+ IMAGES := sysupgrade.bin
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
+ pad-rootfs $$(BLOCKSIZE) | append-metadata
endef
+TARGET_DEVICES += freescale_p2020rdb
+
+endif
$(eval $(call BuildImage))
projects / openwrt / openwrt.git / blobdiff