ramips: use D-Link DIR-600 B1 image for B2 version

[openwrt/openwrt.git] / target / linux / ramips / base-files / etc / board.d / 01_leds

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index ab077bff13d3be31dbd6f25306a70de7fa6ec29c..e6664bdd988ea66aee11a9b403e8d5b023a2d791 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -17,6 +17,16 @@ board=$(ramips_board_name)
 board_config_update
 
 case $board in
+11acnas|\
+all0239-3g|\
+hw550-3g|\
+mofi3500-3gn|\
+sap-g3200u3|\
+sk-wb8|\
+w2914nsv2|\
+wf-2881)
+       set_usb_led "$board:green:usb"
+       ;;
 3g150b|\
 3g300m)
        set_usb_led "$board:blue:3g"
@@ -45,14 +55,6 @@ air3gii)
        set_wifi_led "$board:green:wlan"
        set_usb_led "$board:green:mobile"
        ;;
-all0239-3g|\
-hw550-3g|\
-mofi3500-3gn|\
-sap-g3200u3|\
-sk-wb8|\
-wf-2881)
-       set_usb_led "$board:green:usb"
-       ;;
 all0256n)
        ucidef_set_rssimon "wlan0" "200000" "1"
        ucidef_set_led_rssi "rssilow" "RSSILOW" "$board:green:rssilow" "wlan0" "1" "40" "0" "6"
@@ -120,7 +122,6 @@ dcs-930l-b1)
        ;;
 dir-300-b1|\
 dir-600-b1|\
-dir-600-b2|\
 dir-620-a1)
        ucidef_set_led_default "wan" "WAN LED (amber)" "$board:amber:wan" "1"
        set_wifi_led "rt2800pci-phy0::radio"
@@ -207,6 +208,8 @@ ht-tm02)
        ucidef_set_led_netdev "eth" "Ethernet" "$board:green:lan" "eth0"
        set_wifi_led "$board:blue:wlan"
        ;;
+kn_rc|\
+kn_rf|\
 kng_rc)
        set_usb_led "$board:green:usb"
        set_wifi_led "$board:green:wifi"
@@ -240,6 +243,12 @@ mr-102n)
        set_wifi_led "$board:green:wlan"
        set_usb_led "$board:green:usb"
        ;;
+mr200)
+       ucidef_set_led_default "power" "power" "$board:white:power" "1"
+       ucidef_set_led_netdev "lan" "lan" "$board:white:lan" "eth0.1"
+       ucidef_set_led_netdev "wan" "wan" "$board:white:wan" "usb0"
+       set_wifi_led "$board:white:wlan"
+       ;;
 mzk-ex750np)
        ucidef_set_led_default "power" "power" "$board:red:power" "1"
        set_wifi_led "$board:red:wifi"
@@ -307,9 +316,6 @@ vocore)
        ucidef_set_led_netdev "eth" "ETH" "$board:orange:eth" "eth0"
        set_wifi_led "$board:green:status"
        ;;
-w2914nsv2)
-       set_usb_led "$board:green:usb"
-       ;;
 w502u)
        set_usb_led "$board:blue:usb"
        set_wifi_led "rt2800pci-phy0::radio"
@@ -339,11 +345,18 @@ wndr3700v5)
 wt3020)
        ucidef_set_led_default "power" "power" "$board:blue:power" "0"
        ;;
-y1|\
+y1)
+       set_usb_led "$board:blue:usb"
+       ucidef_set_led_netdev "wifi" "WIFI" "$board:blue:wifi" "wlan1"
+       ucidef_set_led_netdev "wifi5g" "WIFI5G" "$board:blue:wifi5g" "wlan0"
+       ucidef_set_led_netdev "lan" "LAN" "$board:blue:lan" "eth0.1" "tx rx"
+       ucidef_set_led_netdev "wan" "WAN" "$board:blue:internet" "eth0.2" "tx rx"
+       ;;
 y1s)
-       ucidef_set_led_default "power" "power" "$board:blue:power" "1"
        set_usb_led "$board:blue:usb"
-       set_wifi_led "$board:blue:wifi"
+       ucidef_set_led_netdev "wifi" "WIFI" "$board:yellow:wifi" "wlan1"
+       ucidef_set_led_netdev "wifi5g" "WIFI5G" "$board:blue:wifi" "wlan0"
+       ucidef_set_led_netdev "wan" "WAN" "$board:blue:internet" "eth0.2" "tx rx"
        ;;
 zbt-ape522ii)
        ucidef_set_led_netdev "wlan2g4" "wlan1-link" "$board:green:wlan2g4" "wlan1"