ramips: add support for D-Link DWR-118-A1

[openwrt/openwrt.git] / target / linux / ramips / base-files / etc / board.d / 01_leds

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 5f5e5630fdc1bda750138f44cc92601a97630dac..f8c4b05b9a55e6ae194553dd683d28ba51e65310 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -17,6 +17,7 @@ case $board in
        set_wifi_led "$boardname:amber:wlan"
        ;;
 3g-6200nl|\
+skylab,skw92a|\
 wnce2001)
        set_wifi_led "$boardname:green:wlan"
        ;;
@@ -55,6 +56,10 @@ asl26555-16M)
        ucidef_set_led_netdev "eth" "ETH" "asl26555:green:eth" "eth0"
        set_wifi_led "asl26555:green:wlan"
        ;;
+bdcom,wap2100-sk|\
+hiwifi,hc5861b)
+       set_wifi_led "$boardname:green:wlan2g"
+       ;;
 broadway)
        set_wifi_led "$boardname:red:wps_active"
        ;;
@@ -109,6 +114,11 @@ dlink,dwr-116-a1|\
 mzk-ex300np)
        set_wifi_led "$boardname:green:wifi"
        ;;
+dlink,dwr-118-a1)
+       ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1f"
+       ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x20"
+       set_wifi_led "$boardname:green:wlan2g" "wlan1"
+       ;;
 dlink,dwr-118-a2)
        ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0e"
        ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
@@ -150,6 +160,7 @@ gl-mt750)
        ;;
 gl-mt300n-v2)
        set_wifi_led "$boardname:red:wlan"
+       ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x1"
        ;;
 hc5661|\
 hc5661a)
@@ -170,9 +181,6 @@ hg255d)
        set_wifi_led "$boardname:green:wlan"
        ucidef_set_led_netdev "internet" "internet" "$boardname:green:internet" "eth0.2"
        ;;
-hiwifi,hc5861b)
-       set_wifi_led "$boardname:green:wlan2g"
-       ;;
 hpm)
        ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0"
        set_wifi_led "$boardname:green:wifi"
@@ -194,6 +202,10 @@ kn_rf|\
 kng_rc)
        set_wifi_led "$boardname:green:wifi"
        ;;
+lava,lr-25g001)
+       ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "wlan1"
+       ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:green:wlan5g" "wlan0"
+       ;;
 linkits7688)
        ucidef_set_led_wlan "wifi" "wifi" "linkit-smart-7688:orange:wifi" "phy0tpt"
        ;;
@@ -229,6 +241,9 @@ mr200)
        ucidef_set_led_netdev "wan" "wan" "$boardname:white:wan" "usb0"
        set_wifi_led "$boardname:white:wlan"
        ;;
+mtc,wr1201)
+       ucidef_set_led_switch "eth_link" "LAN link" "$boardname:green:eth_link" "switch0" "0x0f"
+       ;;
 mzk-ex750np)
        set_wifi_led "$boardname:red:wifi"
        ;;
@@ -363,6 +378,14 @@ vocore-16M)
 w502u)
        set_wifi_led "rt2800pci-phy0::radio"
        ;;
+wavlink,wl-wn570ha1)
+       ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
+       ucidef_set_rssimon "wlan0" "200000" "1"
+       ucidef_set_led_rssi "wifi-low" "wifi-low" "$boardname:green:wifi-low" "wlan0" "1" "49"
+       ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan0" "50" "84"
+       ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan0" "85" "100"
+       set_wifi_led "$boardname:green:wifi"
+       ;;
 we1026-5g-16m)
        ucidef_set_led_netdev "lan" "LAN" "we1026-5g:green:lan" "eth0"
        set_wifi_led "we1026-5g:green:wifi"