ramips: add support for Archer C50 v4

[openwrt/openwrt.git] / target / linux / ramips / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 0d8855c32489cbcd7b5938c3c3519fbba18799bd..74938121a88c6cf9484686c9ecd863db23c3bd12 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -80,6 +80,7 @@ ramips_setup_interfaces()
        ai-br100|\
        alfa-network,ac1200rm|\
        mediatek,ap-mt7621a-v60|\
+       xzwifi,creativebox-v1|\
        d240|\
        db-wrt01|\
        dir-300-b7|\
@@ -89,6 +90,7 @@ ramips_setup_interfaces()
        dir-810l|\
        dlink,dwr-116-a1|\
        dlink,dwr-921-c1|\
+       dlink,dwr-922-e2|\
        ew1200|\
        firewrt|\
        hc5661a|\
@@ -102,6 +104,7 @@ ramips_setup_interfaces()
        miwifi-nano|\
        mt7621|\
        mt7628|\
+       mtc,wr1201|\
        mzk-750dhp|\
        mzk-w300nh2|\
        netgear,r6120|\
@@ -112,6 +115,7 @@ ramips_setup_interfaces()
        psg1208|\
        psg1218a|\
        r6220|\
+       netgear,r6350|\
        rt-n12p|\
        sap-g3200u3|\
        sk-wb8|\
@@ -138,6 +142,10 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
                ;;
+       gehua,ghl-r-001)
+               ucidef_add_switch "switch0" \
+                       "0:lan" "1:lan" "2:lan" "4:wan" "6@eth0"
+               ;;
        alfa-network,awusfree1|\
        cs-qr10|\
        d105|\
@@ -161,6 +169,10 @@ ramips_setup_interfaces()
        wrh-300cr)
                ucidef_set_interface_lan "eth0"
                ;;
+       dlink,dwr-118-a1)
+               ucidef_add_switch "switch0" \
+                       "1:lan:2" "2:lan:3" "3:lan:1" "4:lan:0" "5:wan" "6@eth0"
+               ;;
        dlink,dwr-118-a2)
                ucidef_add_switch "switch0" \
                        "1:lan:2" "2:lan:1" "3:lan:3" "4:lan" "0:wan" "6@eth0"
@@ -210,13 +222,14 @@ ramips_setup_interfaces()
        jhr-n805r|\
        jhr-n825r|\
        jhr-n926r|\
+       mikrotik,rb750gr3|\
        mikrotik,rbm33g|\
        mzk-wdpr|\
-       rb750gr3|\
        rt-n14u|\
        skylab,skw92a|\
        tplink,c20-v4|\
        tplink,c50-v3|\
+       tplink,c50-v4|\
        tplink,tl-mr3420-v5|\
        tplink,tl-wr842n-v5|\
        tl-wr840n-v4|\
@@ -299,7 +312,8 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch1" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
                ;;
-       hc5*61|\
+       hc5661|\
+       hc5861|\
        y1s)
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "0:wan" "6@eth0"
@@ -322,6 +336,10 @@ ramips_setup_interfaces()
                        "0:lan" "1:lan" "2:lan" "3:lan" "6t@eth0"
                ucidef_set_interface_wan "usb0"
                ;;
+       hc5761)
+               ucidef_add_switch "switch0" \
+                       "1:lan" "4:lan" "0:wan" "6@eth0"
+               ;;
        mzk-dp150n|\
        vocore-8M|\
        vocore-16M)
@@ -432,7 +450,6 @@ ramips_setup_macs()
        wmdr-143n)
                lan_mac=$(cat /sys/class/net/eth0/address)
                ;;
-       all0239-3g|\
        carambola|\
        freestation5|\
        w502u|\
@@ -474,8 +491,10 @@ ramips_setup_macs()
                wan_mac=$(mtd_get_mac_ascii factory wanmac)
                ;;
        dlink,dwr-116-a1|\
+       dlink,dwr-118-a1|\
        dlink,dwr-118-a2|\
        dlink,dwr-921-c1|\
+       dlink,dwr-922-e2|\
        lava,lr-25g001)
                wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000)
                lan_mac=$(macaddr_add "$wan_mac" 1)
@@ -551,7 +570,8 @@ ramips_setup_macs()
                lan_mac=$(mtd_get_mac_binary factory 40)
                wan_mac=$(mtd_get_mac_binary factory 46)
                ;;
-       r6220)
+       r6220|\
+       netgear,r6350)
                wan_mac=$(mtd_get_mac_binary factory 4)
                lan_mac=$(macaddr_add "$wan_mac" 1)
                ;;