ramips: fix wizfi630a swapped lan/wan port

[openwrt/openwrt.git] / target / linux / ramips / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 3a744bda0c36a49d343789fd58f0d7cc0f04c12d..7b624090c34137fa1554d220870c5dfdea310b8b 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -143,6 +143,7 @@ ramips_setup_interfaces()
        mzk-ex750np|\
        na930|\
        pbr-d1|\
+       ravpower,wd03|\
        tama,w06|\
        u25awf-h1|\
        wli-tx4-ag300n|\
@@ -197,12 +198,14 @@ ramips_setup_interfaces()
        jhr-n805r|\
        jhr-n825r|\
        jhr-n926r|\
+       mikrotik,rbm33g|\
        mzk-wdpr|\
        rb750gr3|\
        rt-n14u|\
        tplink,c20-v4|\
        tplink,c50-v3|\
        tplink,tl-mr3420-v5|\
+       tplink,tl-wr842n-v5|\
        tl-wr840n-v4|\
        tl-wr840n-v5|\
        tl-wr841n-v13|\
@@ -210,7 +213,6 @@ ramips_setup_interfaces()
        ubnt-erx|\
        ubnt-erx-sfp|\
        ur-326n4g|\
-       ravpower,wd03|\
        wrtnode|\
        wrtnode2p | \
        wrtnode2r | \
@@ -224,7 +226,9 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "1:lan:3" "2:lan:4" "3:lan:1" "4:lan:2" "0:wan" "6@eth0"
                ;;
-       dir-860l-b1)
+       dir-860l-b1|\
+       elecom,wrc-1167ghbk2-s|\
+       iodata,wn-gx300gr)
                ucidef_add_switch "switch0" \
                        "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
                ;;
@@ -305,6 +309,10 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                "1:lan:2" "2:lan:1" "4:wan" "6@eth0"
                ;;
+       phicomm,k2g)
+               ucidef_add_switch "switch0" \
+                       "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5:wan" "6@eth0"
+               ;;
        re350-v1)
                ucidef_add_switch "switch0" \
                        "0:lan" "6@eth0"
@@ -327,6 +335,10 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
                ;;
+       tplink,c2-v1)
+               ucidef_add_switch "switch1" \
+                       "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
+               ;;
        tplink,tl-wr902ac-v3)
                ucidef_add_switch "switch0" \
                        "4:lan" "6@eth0"
@@ -364,7 +376,7 @@ ramips_setup_interfaces()
                ;;
        wizfi630a)
                ucidef_add_switch "switch0" \
-                       "1:lan" "2:lan" "0:wan" "6@eth0"
+                       "0:lan" "1:lan" "2:wan" "6@eth0"
                ;;
        wt3020-4M|\
        wt3020-8M)
@@ -448,6 +460,10 @@ ramips_setup_macs()
        e1700)
                wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
                ;;
+       elecom,wrc-1167ghbk2-s|\
+       sk-wb8)
+               wan_mac=$(mtd_get_mac_binary factory 57350)
+               ;;
        gl-mt300n-v2|\
        whr-g300n)
                wan_mac=$(mtd_get_mac_binary factory 4)
@@ -459,6 +475,9 @@ ramips_setup_macs()
                [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 1)
                ;;
+       iodata,wn-gx300gr)
+               wan_mac=$(macaddr_add "$(mtd_get_mac_binary Factory 4)" 1)
+               ;;
        kn_rc|\
        kn_rf|\
        kng_rc)
@@ -496,7 +515,8 @@ ramips_setup_macs()
                wan_mac=$(mtd_get_mac_binary factory 4)
                lan_mac=$(mtd_get_mac_binary factory 46)
                ;;
-       oy-0001)
+       oy-0001|\
+       phicomm,k2g)
                lan_mac=$(mtd_get_mac_binary factory 40)
                wan_mac=$(mtd_get_mac_binary factory 46)
                ;;
@@ -509,9 +529,6 @@ ramips_setup_macs()
                lan_mac=$(macaddr_setbit_la "$lan_mac")
                wan_mac=$(mtd_get_mac_binary factory 32772)
                ;;
-       sk-wb8)
-               wan_mac=$(mtd_get_mac_binary factory 57350)
-               ;;
        tew-691gr)
                wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 4)" 3)
                ;;