ramips:Add support for Aigale Ai-BR100

[openwrt/openwrt.git] / target / linux / ramips / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 7ecec5fd279db09a38250248b916160cc67f1e87..80b5449e054d15a4d434f4955fd19c6e9802aebf 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -37,6 +37,12 @@ ramips_setup_interfaces()
        ucidef_set_interface_loopback
 
        case $board in
+       a5-v11)
+               ucidef_set_interface_lan "eth0.1"
+               ucidef_add_switch "switch0" "1" "1"
+               ucidef_add_switch_vlan "switch0" "1" "0 6t"
+               ;;
+
        3g300m | \
        w150m | \
        all0256n | \
@@ -104,20 +110,35 @@ ramips_setup_interfaces()
                ;;
 
        3g-6200n | \
+       ai-br100 | \
        dir-610-a1 | \
        dir-300-b7 | \
        dir-320-b1 | \
        dir-615-h1 | \
        hlk-rm04 | \
+       mt7621 | \
+       mt7628 | \
        mzk-w300nh2 | \
        mzk-750dhp | \
-       wt1520)
+       whr-300hp2 | \
+       whr-600d | \
+       wsr-600 | \
+       wsr-1166 | \
+       wt1520 | \
+       y1)
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" "1" "1"
                ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t"
                ucidef_add_switch_vlan "switch0" "2" "4 6t"
                ;;
 
+       whr-1166d)
+               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+               ucidef_add_switch "switch0" "1" "1"
+               ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t"
+               ucidef_add_switch_vlan "switch0" "2" "5 6t"
+               ;;
+
        awm002-evb | \
        awm003-evb | \
        argus-atp52b | \
@@ -127,6 +148,7 @@ ramips_setup_interfaces()
        hg255d | \
        rt-n14u | \
        wrtnode | \
+       wt3020 | \
        ur-326n4g | \
        zbt-wa05)
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
@@ -147,6 +169,7 @@ ramips_setup_interfaces()
                ucidef_add_switch_vlan "switch0" "2" "0 5t"
                ;;
 
+       ar670w | \
        ar725w | \
        rt-n15 | \
        wl-351)
@@ -191,7 +214,6 @@ ramips_setup_interfaces()
                ucidef_add_switch_vlan "switch0" "2" "4 6t"
                ;;
 
-       y1 |\
        y1s)
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" "1" "1"
@@ -205,6 +227,14 @@ ramips_setup_interfaces()
                ucidef_set_interface_lan "eth0"
                ;;
 
+       e1700 | \
+       mt7620a_mt7530)
+               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+               ucidef_add_switch "switch1" "1" "1"
+               ucidef_add_switch_vlan "switch1" "1" "0 1 2 3 6t"
+               ucidef_add_switch_vlan "switch1" "2" "4 6t"
+               ;;
+
        *)
                RT3X5X=`cat /proc/cpuinfo | egrep "(RT3.5|RT5350)"`
                if [ -n "${RT3X5X}" ]; then
@@ -251,6 +281,7 @@ ramips_setup_macs()
                lan_mac=$(macaddr_add "$lan_mac" -2)
                ;;
 
+       a5-v11 |\
        bc2 |\
        broadway |\
        d105 |\
@@ -278,6 +309,10 @@ ramips_setup_macs()
                wan_mac=$(mtd_get_mac_ascii nvram wanmac)
                ;;
 
+       e1700)
+               wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
+               ;;
+
        wcr-150gn)
                 wan_mac=$(mtd_get_mac_binary factory 40)
                ;;