ramips: Fix HooToo HT-TM02 support.

[openwrt/openwrt.git] / target / linux / ramips / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 1c7d80ce0e3174bb335a8f0fcea247ddd2df8e9d..a86466e5e7adac6fac10d711ab4c8516b3fef83c 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -50,6 +50,7 @@ ramips_setup_interfaces()
        all5003 | \
        broadway | \
        dcs-930| \
+       ht-tm02| \
        ncs601w | \
        wnce2001)
                ucidef_add_switch "switch0" "1" "0"
@@ -58,8 +59,8 @@ ramips_setup_interfaces()
 
        3g-6200nl | \
        mlw221)
-                ucidef_set_interface_lan "eth0.2"
-                ;;
+               ucidef_set_interface_lan "eth0.2"
+               ;;
 
        wizard8800 | \
        wl-330n | \
@@ -103,30 +104,36 @@ ramips_setup_interfaces()
                ucidef_add_switch_vlan "switch0" "2" "4 9t"
                ;;
 
-       ht-tm02)
-               ucidef_set_interface_lan "eth0.1"
-               ucidef_add_switch "switch0" "1" "1"
-               ucidef_add_switch_vlan "switch0" "1" "4 6t"
-               ;;
-
        3g-6200n | \
+       ai-br100 | \
        dir-610-a1 | \
        dir-300-b7 | \
        dir-320-b1 | \
        dir-615-h1 | \
        hlk-rm04 | \
+       mt7621 | \
+       mt7628 | \
        mzk-w300nh2 | \
        mzk-750dhp | \
        whr-300hp2 | \
        whr-600d | \
-       whr-1166d | \
-       wt1520)
+       wsr-600 | \
+       wsr-1166 | \
+       wt1520 | \
+       y1)
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" "1" "1"
                ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t"
                ucidef_add_switch_vlan "switch0" "2" "4 6t"
                ;;
 
+       whr-1166d)
+               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+               ucidef_add_switch "switch0" "1" "1"
+               ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t"
+               ucidef_add_switch_vlan "switch0" "2" "5 6t"
+               ;;
+
        awm002-evb | \
        awm003-evb | \
        argus-atp52b | \
@@ -157,6 +164,7 @@ ramips_setup_interfaces()
                ucidef_add_switch_vlan "switch0" "2" "0 5t"
                ;;
 
+       ar670w | \
        ar725w | \
        rt-n15 | \
        wl-351)
@@ -201,7 +209,6 @@ ramips_setup_interfaces()
                ucidef_add_switch_vlan "switch0" "2" "4 6t"
                ;;
 
-       y1 |\
        y1s)
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" "1" "1"
@@ -215,6 +222,7 @@ ramips_setup_interfaces()
                ucidef_set_interface_lan "eth0"
                ;;
 
+       e1700 | \
        mt7620a_mt7530)
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch1" "1" "1"
@@ -278,7 +286,6 @@ ramips_setup_macs()
        hlk-rm04 | \
        mpr-a1 | \
        mpr-a2 | \
-        ht-tm02 | \
        dir-300-b7 | \
        dir-320-b1 | \
        psr-680w |\
@@ -290,14 +297,22 @@ ramips_setup_macs()
                wan_mac=$(macaddr_add "$lan_mac" 1)
                ;;
 
+       ht-tm02)
+               lan_mac=$(cat /sys/class/net/eth0/address)
+               ;;
+
        cy-swr1100 | \
        dir-645)
                lan_mac=$(mtd_get_mac_ascii nvram lanmac)
                wan_mac=$(mtd_get_mac_ascii nvram wanmac)
                ;;
 
+       e1700)
+               wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
+               ;;
+
        wcr-150gn)
-                wan_mac=$(mtd_get_mac_binary factory 40)
+               wan_mac=$(mtd_get_mac_binary factory 40)
                ;;
 
        rt-n56u)