ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards

[openwrt/openwrt.git] / target / linux / ramips / base-files / etc / hotplug.d / firmware / 10-rt2x00-eeprom

diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 920c8a33a2126f0b349ac13b4759c3fb2fc7b97a..ac97d037c10562787fd117e580a39e74a4ac7a7b 100644 (file)
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -41,26 +41,37 @@ case "$FIRMWARE" in
                rt2x00_eeprom_extract "devconf" 0 272
                ;;
 
+       f5d8235-v1 | \
        f5d8235-v2)
                rt2x00_eeprom_extract "u-boot" 262144 272
                ;;
 
+       all0256n | \
        argus-atp52b | \
        bc2 | \
+       esr-9753 | \
        fonera20n | \
        hw550-3g | \
        mofi3500-3gn | \
        pwh2004 | \
        nbg-419n | \
        nw718 | \
+       omni-emb | \
        rt-n15 | \
        v22rw-2x2 | \
+       w502u | \
        wcr-150gn | \
        whr-g300n | \
+       wl-351 | \
+       wli-tx4-ag300n | \
        wr512-3gn)
                rt2x00_eeprom_extract "factory" 0 272
                ;;
 
+       wl341v3)
+               rt2x00_eeprom_extract "board-nvram" 64880 272
+               ;;
+
        *)
                rt2x00_eeprom_die "board $board is not supported yet"
                ;;