ralink: add support for 2 new mt7620 boards made by buffalo

[openwrt/openwrt.git] / target / linux / ramips / base-files / etc / uci-defaults / 02_network

diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index 9a8cab8eee75237b79c1792410e4d3bcf59f422d..9026700ac95321b1bc824ed5d8502e0459a7eac8 100755 (executable)
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -41,7 +41,11 @@ ramips_setup_interfaces()
        all0256n | \
        all5002 | \
        all5003 | \
+       awm002-evb | \
        broadway | \
+       dcs-930| \
+       mpr-a1 | \
+       mpr-a2 | \
        wnce2001)
                ucidef_add_switch "switch0" "1" "0"
                ucidef_set_interface_lan "eth0"
@@ -76,6 +80,9 @@ ramips_setup_interfaces()
                ucidef_add_switch_vlan "switch0" "2" "0 6t"
                ;;
 
+       dir-610-a1 | \
+       dir-300-b7 | \
+       dir-320-b1 | \
        dir-615-h1 | \
        mzk-w300nh2)
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
@@ -139,6 +146,11 @@ ramips_setup_interfaces()
                ucidef_set_interface_lan "eth0"
                ;;
 
+       whr-300hp2 |\
+       whr-600d)
+               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+               ;;
+       
        *)
                RT3X5X=`cat /proc/cpuinfo | egrep "(RT3.5|RT5350)"`
                if [ -n "${RT3X5X}" ]; then
@@ -172,7 +184,11 @@ ramips_setup_macs()
        broadway | \
        dir-620-d1 | \
        f5d8235-v1 | \
+       ip2202 | \
+       mpr-a1 | \
        mpr-a2 | \
+       dir-300-b7 | \
+       dir-320-b1 | \
        mzk-w300nh2 | \
        nw718 | \
        psr-680w | \
@@ -194,14 +210,16 @@ ramips_setup_macs()
 
        rt-n13u | \
        hg255d  | \
-       fonera20n)
+       fonera20n | \
+       dir-810l)
                lan_mac=$(mtd_get_mac_binary factory 40)
                wan_mac=$(macaddr_add "$lan_mac" 1)
                ;;
 
        dir-300-b1 |\
        dir-300-b2 |\
-       dir-600-b1)
+       dir-600-b1 |\
+       dir-610-a1)
                lan_mac=$(mtd_get_mac_binary devdata 16388)
                wan_mac=$(macaddr_add "$lan_mac" 1)
                ;;
@@ -224,6 +242,14 @@ ramips_setup_macs()
                wan_mac=$(macaddr_add "$lan_mac" 1)
                ;;
 
+       m3 |\
+       m4 |\
+       x5 |\
+       x8)
+               lan_mac=$(mtd_get_mac_binary factory 4)
+               lan_mac=$(macaddr_add "$lan_mac" -1)
+               ;;
+
        nbg-419n | \
        wcr-150gn)
                 lan_mac=$(mtd_get_mac_binary factory 4)