# that happens, so this needs to run very early during boot.
do_checksumming_disable() {
- . /lib/ramips.sh
+ . /lib/functions.sh
- local board=$(ramips_board_name)
+ local board=$(board_name)
case "$board" in
- wnce2001)
+ netgear,wnce2001)
echo "Board is WNCE2001, updating checksum partition..."
local zeroes=/dev/zero
local tmpfile=/tmp/wnce2001_checksum
echo "Checksum is already zero, nothing to do."
fi
;;
- rt-n56u)
+ asus,rt-n56u)
echo "Board is ASUS RT-N56U, replacing uImage header..."
local firmware_mtd=$(find_mtd_part firmware)
local rootfs_mtd=$(find_mtd_part rootfs)
local rootfs_data_len=$(grep \"rootfs_data\" /proc/mtd | awk -F' ' '{print "0x"$2}')
local offset=$(echo "$rootfs_len $rootfs_data_len 0x40" | awk -F' ' '{printf "%i",$1-$2-$3}')
local signature=$(dd if=$rootfs_mtd skip=$offset bs=1 count=4 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"')
- if [ "$signature" == "27051956" ]; then
+ if [ "$signature" = "27051956" ]; then
dd conv=notrunc if=$rootfs_mtd skip=$offset of=$firmware_mtd bs=1 count=64 2>/dev/null
fi
;;