ramips: drop not existing groups from pinmux
[openwrt/openwrt.git] / target / linux / ramips / dts / 3G150B.dts
index afe9fafe9bea385769a43acadbbb93e980824c1c..90a52fa8bcc77ff52eb65a468e8166ba0f516e6a 100644 (file)
@@ -9,10 +9,14 @@
        compatible = "tenda,3g150b", "ralink,rt5350-soc";
        model = "Tenda 3G150B";
 
+       aliases {
+               led-status = &led_ap;
+       };
+
        gpio-leds {
                compatible = "gpio-leds";
 
-               ap {
+               led_ap: ap {
                        label = "3g150b:blue:ap";
                        gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
                };
@@ -25,8 +29,6 @@
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                reset {
        status = "okay";
 
        m25p80@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
 
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0x3b0000>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0x3b0000>;
+                       };
                };
        };
 };
@@ -90,7 +96,7 @@
 &pinctrl {
        state_default: pinctrl0 {
                gpio {
-                       ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf", "led";
+                       ralink,group = "i2c", "jtag", "uartf", "led";
                        ralink,function = "gpio";
                };
        };