ramips: Fix GB-PC1 cpuclock again

[openwrt/openwrt.git] / target / linux / ramips / dts / 3G300M.dts

diff --git a/target/linux/ramips/dts/3G300M.dts b/target/linux/ramips/dts/3G300M.dts
index 331e9feaffe9699890893a9d771a0e6f8f2598d1..eb1399529acd141cf80c6dd67a29f57315a4619b 100644 (file)
--- a/target/linux/ramips/dts/3G300M.dts
+++ b/target/linux/ramips/dts/3G300M.dts
@@ -2,8 +2,11 @@
 
 #include "rt3050.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
 / {
-       compatible = "3G300M", "ralink,rt3052-soc";
+       compatible = "tenda,3g300m", "ralink,rt3052-soc";
        model = "Tenda 3G300M";
 
        gpio-leds {
@@ -11,32 +14,32 @@
 
                3grouter {
                        label = "3g300m:blue:3grouter";
-                       gpios = <&gpio0 11 1>;
+                       gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
                };
 
                ap {
                        label = "3g300m:blue:ap";
-                       gpios = <&gpio0 12 1>;
+                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
                };
 
                wisprouter {
                        label = "3g300m:blue:wisprouter";
-                       gpios = <&gpio0 9 1>;
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
 
                wirelessrouter {
                        label = "3g300m:blue:wirelessrouter";
-                       gpios = <&gpio0 13 1>;
+                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
                };
 
                3g {
                        label = "3g300m:blue:3g";
-                       gpios = <&gpio0 7 1>;
+                       gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
                };
 
                wpsreset {
                        label = "3g300m:blue:wpsreset";
-                       gpios = <&gpio0 14 1>;
+                       gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
                };
        };
 
@@ -48,14 +51,14 @@
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 0 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
 
                mode {
                        label = "mode";
-                       gpios = <&gpio0 10 1>;
-                       linux,code = <0x100>;
+                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
                };
        };
 };
@@ -67,8 +70,7 @@
                #address-cells = <1>;
                #size-cells = <1>;
                compatible = "jedec,spi-nor";
-               reg = <0 0>;
-               linux,modalias = "m25p80", "mx25l3205d";
+               reg = <0>;
                spi-max-frequency = <10000000>;
 
                partition@0 {