ramips: fix WiFi MAC addresses for D-Link DIR-810L

[openwrt/openwrt.git] / target / linux / ramips / dts / AI-BR100.dts

diff --git a/target/linux/ramips/dts/AI-BR100.dts b/target/linux/ramips/dts/AI-BR100.dts
index d53c8d22776da7d46adf8e9fe95c8f7d19726d0a..8de4b5877adffc7d0eb085939a2b41d47ff97d49 100644 (file)
--- a/target/linux/ramips/dts/AI-BR100.dts
+++ b/target/linux/ramips/dts/AI-BR100.dts
@@ -2,108 +2,116 @@
 
 #include "mt7620a.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
 / {
-       compatible = "AI-BR100", "ralink,mt7620a-soc";
+       compatible = "aigale,ai-br100", "ralink,mt7620a-soc";
        model = "Aigale Ai-BR100";
 
-       palmbus@10000000 {
-               gpio2: gpio@660 {
-                       status = "okay";
-               };
+       aliases {
+               led-boot = &led_wlan;
+               led-failsafe = &led_wlan;
+               led-running = &led_wlan;
+               led-upgrade = &led_wlan;
+       };
 
-               gpio3: gpio@688 {
-                       status = "okay";
-               };
+       leds {
+               compatible = "gpio-leds";
 
-               spi@b00 {
-                       status = "okay";
-
-                       m25p80@0 {
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               compatible = "jedec,spi-nor";
-                               reg = <0 0>;
-                               linux,modalias = "m25p80", "en25q64";
-                               spi-max-frequency = <10000000>;
-
-                               partition@0 {
-                                       label = "u-boot";
-                                       reg = <0x0 0x20000>;
-                                       read-only;
-                               };
-
-                               partition@20000 {
-                                       label = "u-boot-env";
-                                       reg = <0x20000 0x10000>;
-                                       read-only;
-                               };
-
-                               factory: partition@30000 {
-                                       label = "factory";
-                                       reg = <0x30000 0x10000>;
-                                       read-only;
-                               };
-
-                               partition@40000 {
-                                       label = "firmware";
-                                       reg = <0x40000 0x7c0000>;
-                               };
-                       };
+               wan {
+                       label = "ai-br100:blue:wan";
+                       gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
                };
-       };
 
-       ehci@101c0000 {
-               status = "okay";
+               led_wlan: wlan {
+                       label = "ai-br100:blue:wlan";
+                       gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+               };
        };
 
-       ohci@101c1000 {
-               status = "okay";
-       };
+       keys {
+               compatible = "gpio-keys-polled";
+               poll-interval = <20>;
 
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
-                               ralink,function = "gpio";
-                       };
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
        };
+};
 
-       ethernet@10100000 {
-               pinctrl-names = "default";
-               pinctrl-0 = <&ephy_pins>;
-               mtd-mac-address = <&factory 0x4>;
-               mediatek,portmap = "llllw";
-       };
+&gpio2 {
+       status = "okay";
+};
 
-       wmac@10180000 {
-               ralink,mtd-eeprom = <&factory 0>;
-       };
+&gpio3 {
+       status = "okay";
+};
 
-       gpio-leds {
-               compatible = "gpio-leds";
+&spi0 {
+       status = "okay";
 
-               wan {
-                       label = "ai-br100:blue:wan";
-                       gpios = <&gpio2 4 1>;
-               };
+       m25p80@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0 0>;
+               spi-max-frequency = <10000000>;
 
-               wlan {
-                       label = "ai-br100:blue:wlan";
-                       gpios = <&gpio3 0 1>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x20000>;
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               label = "u-boot-env";
+                               reg = <0x20000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@30000 {
+                               label = "factory";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x40000 0x7c0000>;
+                       };
                };
        };
+};
 
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
+&ehci {
+       status = "okay";
+};
 
-               reset {
-                       label = "reset";
-                       gpios = <&gpio0 12 1>;
-                       linux,code = <0x198>;
+&ohci {
+       status = "okay";
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
+                       ralink,function = "gpio";
                };
        };
 };
+
+&ethernet {
+       mtd-mac-address = <&factory 0x4>;
+       mediatek,portmap = "llllw";
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};