ramips: enable external amplifier for D-Link DIR-810L

[openwrt/openwrt.git] / target / linux / ramips / dts / ALL5003.dts

diff --git a/target/linux/ramips/dts/ALL5003.dts b/target/linux/ramips/dts/ALL5003.dts
index dfb97e6d9b9362bd12730d8e66185b71aeb232a4..8a3488a7e0e0ac7006558c8beb224c03a93e91aa 100644 (file)
--- a/target/linux/ramips/dts/ALL5003.dts
+++ b/target/linux/ramips/dts/ALL5003.dts
@@ -2,8 +2,11 @@
 
 #include "rt5350.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
 / {
-       compatible = "ALL5003", "ralink,rt5350-soc";
+       compatible = "allnet,all5003", "ralink,rt5350-soc";
        model = "Allnet ALL5003";
 
        i2c-gpio {
@@ -11,7 +14,7 @@
                #size-cells = <0>;
 
                compatible = "i2c-gpio";
-               gpios = <&gpio0 1 0 &gpio0 2 0>;
+               gpios = <&gpio0 1 GPIO_ACTIVE_HIGH &gpio0 2 GPIO_ACTIVE_HIGH>;
                i2c-gpio,delay-us = <10>;
 
                pcf0: iexp@38 {
@@ -27,17 +30,17 @@
                };
        };
 
-       gpio-leds {
+       leds {
                compatible = "gpio-leds";
 
                ld1 {
                        label = "all5003:green:ld1";
-                       gpios = <&pcf0 0 1>;
+                       gpios = <&pcf0 0 GPIO_ACTIVE_LOW>;
                };
 
                ld2 {
                        label = "all5003:green:ld2";
-                       gpios = <&pcf0 1 1>;
+                       gpios = <&pcf0 1 GPIO_ACTIVE_LOW>;
                };
        };
 };
@@ -50,34 +53,38 @@
        status = "okay";
 
        m25p80@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
-               linux,modalias = "m25p80", "mx25l25635e";
                spi-max-frequency = <10000000>;
 
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0x1fb0000>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0x1fb0000>;
+                       };
                };
        };
 };
@@ -85,7 +92,7 @@
 &pinctrl {
        state_default: pinctrl0 {
                gpio {
-                       ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+                       ralink,group = "i2c", "jtag", "uartf";
                        ralink,function = "gpio";
                };
        };