ramips: Change all '/include/' clauses to '#include' so preprocessing can

[openwrt/openwrt.git] / target / linux / ramips / dts / DAP-1350.dts

diff --git a/target/linux/ramips/dts/DAP-1350.dts b/target/linux/ramips/dts/DAP-1350.dts
index 5f2c096592299086b14ed2c7a935c217259e5f68..e983372dab0471bae7476f04cd6ab75f00575e05 100644 (file)
--- a/target/linux/ramips/dts/DAP-1350.dts
+++ b/target/linux/ramips/dts/DAP-1350.dts
@@ -1,36 +1,27 @@
 /dts-v1/;
 
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
 
 / {
        compatible = "DAP-1350", "ralink,rt3052-soc";
        model = "D-Link DAP-1350";
 
-       memorydetect {
-               ralink,memory = <0x0 0x200000 0x4000000>;
-       };
-
        chosen {
-               bootargs = "console=ttyS0,115200 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(devdata)ro,192k(devconf)ro,256k(devlang)ro,7488k@0xb0000(firmware)";
+               bootargs = "console=ttyS0,115200";
        };
 
-       palmbus@10000000 {
-               sysc@0 {
-                       ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
-                       ralink,uartmux = "gpio";
-                       ralink,wdtmux = <1>;
-               };
-
-               gpio0: gpio@600 {
-                       status = "okay";
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+                               ralink,function = "gpio";
+                       };
                };
-
        };
 
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
-
                bank-width = <2>;
                device-width = <2>;
                #address-cells = <1>;
@@ -42,7 +33,7 @@
                        read-only;
                };
 
-               partition@30000 {
+               devdata: partition@30000 {
                        label = "devdata";
                        reg = <0x30000 0x10000>;
                        read-only;
@@ -67,26 +58,32 @@
        };
 
        ethernet@10100000 {
-               status = "okay";
+               mtd-mac-address = <&devdata 0x2e>;
        };
 
        esw@10110000 {
-               status = "okay";
-               ralink,portmap = <0x2f>;
+               mediatek,portmap = <0x2f>;
+       };
+
+       wmac@10180000 {
+               ralink,mtd-eeprom = <&devdata 0>;
        };
 
        gpio-leds {
                compatible = "gpio-leds";
+
                power {
-                       label = "d-link:blue:power";
+                       label = "dap-1350:blue:power";
                        gpios = <&gpio0 8 1>;
                };
+
                power2 {
-                       label = "d-link:red:power";
+                       label = "dap-1350:red:power";
                        gpios = <&gpio0 9 1>;
                };
+
                wps {
-                       label = "d-link:blue:wps";
+                       label = "dap-1350:blue:wps";
                        gpios = <&gpio0 14 1>;
                };
        };
@@ -96,21 +93,25 @@
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
+
                reset {
                        label = "reset";
                        gpios = <&gpio0 10 1>;
                        linux,code = <0x198>;
                };
+
                wps {
                        label = "wps";
                        gpios = <&gpio0 0 1>;
                        linux,code = <0x211>;
                };
+
                rt {
                        label = "rt";
                        gpios = <&gpio0 11 1>;
                        linux,code = <0x100>;
                };
+
                ap {
                        label = "ap";
                        gpios = <&gpio0 7 1>;
@@ -118,10 +119,6 @@
                };
        };
 
-       wmac@10180000 {
-               status = "okay";
-       };
-
        otg@101c0000 {
                status = "okay";
        };