ramips: add support for indicating the boot state using multiple leds

[openwrt/openwrt.git] / target / linux / ramips / dts / EX2700.dts

diff --git a/target/linux/ramips/dts/EX2700.dts b/target/linux/ramips/dts/EX2700.dts
index 099700c3642ba493994ff9b9438e55d15e9f2bcd..658543e0fba9d0cfad5273903bd63b2fb473b6b6 100644 (file)
--- a/target/linux/ramips/dts/EX2700.dts
+++ b/target/linux/ramips/dts/EX2700.dts
@@ -12,137 +12,143 @@
 
 #include "mt7620a.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
 / {
-       compatible = "ralink,mt7620a-soc";
+       compatible = "netgear,ex2700", "ralink,mt7620a-soc";
        model = "Netgear EX2700";
 
-       chosen {
-               bootargs = "console=ttyS0,57600";
-       };
-
-       palmbus@10000000 {
-
-               gpio0: gpio@600 {
-                       status = "okay";
-               };
-
-               gpio1: gpio@638 {
-                       status = "okay";
-               };
-
-               spi@b00 {
-                       status = "okay";
-
-                       m25p80@0 {
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               compatible = "jedec,spi-nor";
-                               reg = <0 0>;
-                               linux,modalias = "m25p80", "mx25l3205d";
-                               spi-max-frequency = <10000000>;
-
-                               partition@0 {
-                                       label = "u-boot";
-                                       reg = <0x0 0x30000>;
-                                       read-only;
-                               };
-
-                               partition@30000 {
-                                       label = "u-boot-env";
-                                       reg = <0x30000 0x10000>;
-                                       read-only;
-                               };
-
-                               partition@40000 {
-                                       label = "firmware";
-                                       reg = <0x40000 0x3b0000>;
-                               };
-
-                               art: partition@3f0000 {
-                                       label = "art";
-                                       reg = <0x3f0000 0x10000>;
-                                       read-only;
-                               };
-                       };
-               };
+       aliases {
+               led-boot = &led_power_green;
+               led-failsafe = &led_power_green;
+               led-running = &led_power_green;
+               led-upgrade = &led_power_green;
        };
 
-       ethernet@10100000 {
-               mtd-mac-address = <&art 0x0>;
-       };
-
-       wmac@10180000 {
-               ralink,mtd-eeprom = <&art 0x1000>;
-       };
-
-       pinctrl {
-               state_default: pinctrl0 {
-                       default {
-                               //  spi refclk: pins 37, 38, 39
-                               //       uartf: pins 8, 9, 10, 11, 12, 13, 14
-                               //         i2c: pins 1, 2
-                               ralink,group = "i2c", "uartf", "spi refclk";
-                               ralink,function = "gpio";
-                       };
-               };
+       chosen {
+               bootargs = "console=ttyS0,57600";
        };
 
        gpio-leds {
                compatible = "gpio-leds";
 
-               power_g {
+               led_power_green: power_g {
                        label = "ex2700:green:power";
-                       gpios = <&gpio0 9 1>;
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                        default-state = "on";
                };
 
                power_r {
                        label = "ex2700:red:power";
-                       gpios = <&gpio0 11 1>;
+                       gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
                };
 
                device_g {
                        label = "ex2700:green:device";
-                       gpios = <&gpio0 13 1>;
+                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
                };
 
                device_r {
                        label = "ex2700:red:device";
-                       gpios = <&gpio0 10 1>;
+                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
                };
 
                router_g {
                        label = "ex2700:green:router";
-                       gpios = <&gpio0 12 1>;
+                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
                };
 
                router_r {
                        label = "ex2700:red:router";
-                       gpios = <&gpio0 14 1>;
+                       gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
                };
 
                wps {
                        label = "ex2700:green:wps";
-                       gpios = <&gpio1 15 1>;
+                       gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
                };
        };
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 1 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
 
                wps {
                        label = "wps";
-                       gpios = <&gpio0 2 1>;
-                       linux,code = <0x211>;
+                       gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+       };
+};
+
+&gpio0 {
+       status = "okay";
+};
+
+&gpio1 {
+       status = "okay";
+};
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "firmware";
+                               reg = <0x40000 0x3b0000>;
+                       };
+
+                       art: partition@3f0000 {
+                               label = "art";
+                               reg = <0x3f0000 0x10000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&ethernet {
+       mtd-mac-address = <&art 0x0>;
+};
+
+&wmac {
+       mtd-mac-address = <&art 0x6>;
+       ralink,mtd-eeprom = <&art 0x1000>;
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               default {
+                       ralink,group = "i2c", "uartf", "spi refclk";
+                       ralink,function = "gpio";
                };
        };
 };