#include "mt7620a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
/ {
- compatible = "ralink,mt7620a-soc";
+ compatible = "netgear,ex2700", "ralink,mt7620a-soc";
model = "Netgear EX2700";
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_green;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
chosen {
bootargs = "console=ttyS0,57600";
};
gpio-leds {
compatible = "gpio-leds";
- power_g {
+ led_power_green: power_g {
label = "ex2700:green:power";
- gpios = <&gpio0 9 1>;
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
default-state = "on";
};
power_r {
label = "ex2700:red:power";
- gpios = <&gpio0 11 1>;
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
device_g {
label = "ex2700:green:device";
- gpios = <&gpio0 13 1>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
device_r {
label = "ex2700:red:device";
- gpios = <&gpio0 10 1>;
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
};
router_g {
label = "ex2700:green:router";
- gpios = <&gpio0 12 1>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
};
router_r {
label = "ex2700:red:router";
- gpios = <&gpio0 14 1>;
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
wps {
label = "ex2700:green:wps";
- gpios = <&gpio1 15 1>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
- gpios = <&gpio0 1 1>;
- linux,code = <0x198>;
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
- gpios = <&gpio0 2 1>;
- linux,code = <0x211>;
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
};
};
};
status = "okay";
m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l3205d";
+ reg = <0>;
spi-max-frequency = <10000000>;
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- partition@40000 {
- label = "firmware";
- reg = <0x40000 0x3b0000>;
- };
-
- art: partition@3f0000 {
- label = "art";
- reg = <0x3f0000 0x10000>;
- read-only;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "firmware";
+ reg = <0x40000 0x3b0000>;
+ };
+
+ art: partition@3f0000 {
+ label = "art";
+ reg = <0x3f0000 0x10000>;
+ read-only;
+ };
};
};
};
};
&wmac {
+ mtd-mac-address = <&art 0x6>;
ralink,mtd-eeprom = <&art 0x1000>;
};
&pinctrl {
state_default: pinctrl0 {
default {
- // spi refclk: pins 37, 38, 39
- // uartf: pins 8, 9, 10, 11, 12, 13, 14
- // i2c: pins 1, 2
ralink,group = "i2c", "uartf", "spi refclk";
ralink,function = "gpio";
};