#include "rt2880.dtsi"
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "F5D8235_V1", "ralink,rt2880-soc";
+ compatible = "belkin,f5d8235-v1", "ralink,rt2880-soc";
model = "Belkin F5D8235 v1";
+ aliases {
+ led-status = &led_wired_blue;
+ };
+
cfi@1f000000 {
compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
+ reg = <0xbc400000 0x800000>;
bank-width = <2>;
device-width = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "uboot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
- partition@50000 {
- label = "linux";
- reg = <0x50000 0x3b0000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "uboot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
};
};
rtl8366s {
compatible = "realtek,rtl8366s";
- gpio-sda = <&gpio0 1 0>;
- gpio-sck = <&gpio0 2 0>;
+ gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+
+ realtek,initvals = <
+ 0x0242 0x02BF
+ 0x0245 0x02BF
+ 0x0248 0x02BF
+ 0x024B 0x02BF
+ 0x024E 0x02BF
+ 0x0251 0x02BF
+ 0x0254 0x0A3F
+ 0x0256 0x0A3F
+ 0x0258 0x0A3F
+ 0x025A 0x0A3F
+ 0x025C 0x0A3F
+ 0x025E 0x0A3F
+ 0x0263 0x007C
+ 0x0100 0x0004
+ 0xBE5B 0x3500
+ 0x800E 0x200F
+ 0xBE1D 0x0F00
+ 0x8001 0x5011
+ 0x800A 0xA2F4
+ 0x800B 0x17A3
+ 0xBE4B 0x17A3
+ 0xBE41 0x5011
+ 0xBE17 0x2100
+ 0x8000 0x8304
+ 0xBE40 0x8304
+ 0xBE4A 0xA2F4
+ 0x800C 0xA8D5
+ 0x8014 0x5500
+ 0x8015 0x0004
+ 0xBE4C 0xA8D5
+ 0xBE59 0x0008
+ 0xBE09 0x0E00
+ 0xBE36 0x1036
+ 0xBE37 0x1036
+ 0x800D 0x00FF
+ 0xBE4D 0x00FF
+ >;
+
+ realtek,green-ethernet-features;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <100>;
wps {
label = "wps";
- gpios = <&gpio0 0 1>;
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
- gpios = <&gpio0 9 1>;
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
+ internet {
+ label = "f5d8235-v1:blue:internet";
+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ };
+
+ internet2 {
+ label = "f5d8235-v1:amber:internet";
+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+ };
+
+ modem {
+ label = "f5d8235-v1:blue:modem";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+
+ modem2 {
+ label = "f5d8235-v1:amber:modem";
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ };
+
+ router {
+ label = "f5d8235-v1:blue:router";
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ };
+
storage {
label = "f5d8235-v1:blue:storage";
- gpios = <&gpio0 7 1>;
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
};
storage2 {
- label = "f5d8235-v1:orange:storage";
- gpios = <&gpio0 8 1>;
+ label = "f5d8235-v1:amber:storage";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+
+ security {
+ label = "f5d8235-v1:blue:security";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+
+ security2 {
+ label = "f5d8235-v1:amber:security";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+
+ led_wired_blue: wired {
+ label = "f5d8235-v1:blue:wired";
+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ };
+
+ wired2 {
+ label = "f5d8235-v1:amber:wired";
+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ };
+
+ wireless {
+ label = "f5d8235-v1:blue:wireless";
+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ };
+
+ wireless2 {
+ label = "f5d8235-v1:amber:wireless";
+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,group = "spi", "i2c", "jtag", "mdio", "uartlite";
ralink,function = "gpio";
};
};
};
};
-/* FIXME: no u-boot partition and 0x40000@uboot is out of boundaries */
-/*&wmac {
+&pci {
status = "okay";
- ralink,mtd-eeprom = <&u-boot 0x40000>;
+
+ usb@11,0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "pci1033,0035";
+ reg = <0x8800 0 0 0 0>;
+
+ ohci_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+ };
+
+ usb@11,1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "pci1033,00e0";
+ reg = <0x8900 0 0 0 0>;
+
+ ehci_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+ };
};
-*/
+&wmac {
+ status = "okay";
+ ralink,mtd-eeprom = <&factory 0x0>;
+};
projects / openwrt / openwrt.git / blobdiff